|
|
|
| Prediction model of end-point phosphorus content for BOF based on monotone-constrained BP neural network |
| Kai-xiao Zhou1, Wen-hui Lin1, Jian-kun Sun1, Jiang-shan Zhang1, De-zheng Zhang2, Xiao-ming Feng3, Qing Liu1 |
| 1 State Key Laboratory of Advanced Metallurgy, University of Science and Technology Beijing, Beijing 100083, China 2 School of Computer and Communication Engineering, University of Science and Technology Beijing, Beijing 100083, China 3 Xinyu Iron and Steel Co., Ltd., Xinyu 338001, Jiangxi, China |
|
|
|
|
Abstract Dephosphorization is essential content in the steelmaking process, and the process after the converter has no dephosphorization function. Therefore, phosphorus must be removed to the required level in the converter process. In order to better control the end-point phosphorus content of basic oxygen furnace (BOF), a prediction model of end-point phosphorus content for BOF based on monotone-constrained backpropagation (BP) neural network was established. Through the theoretical analysis of the dephosphorization process, ten factors that affect the end-point phosphorus content were determined as the input variables of the model. The correlations between influencing factors and end-point phosphorus content were determined as the constraint condition of the model. 200 sets of data were used to verify the accuracy of the model, and the hit ratios in the range of ± 0.005% and ± 0.003% are 94% and 74%, respectively. The fit coefficient of determination of the predicted value and the actual value is 0.8456, and the root-mean-square error is 0.0030; the predictive accuracy is better than that of ordinary BP neural network, and this model has good interpretability. It can provide useful reference for real production and also provide a new approach for metallurgical predictive modeling.
|
|
|
|
|
|
| Cite this article: |
|
Kai-xiao Zhou,Wen-hui Lin,Jian-kun Sun, et al. Prediction model of end-point phosphorus content for BOF based on monotone-constrained BP neural network[J]. Journal of Iron and Steel Research International, 2022, 29(5): 751-760.
|
|
|
|
| [1] |
Ning-ning Lv, Chang Su, Hui Kong, Hai-chuan Wang, Yuan-chi Dong. Leaching process of phosphorus and iron from steelmaking slag into malic acid solution[J]. JOURNAL OF IRON AND STEEL RESEARCH,INTERNATIONAL, 2022, 29(6): 951-960. |
| [2] |
Zhi-ming Yan, Xue-wei Lv, Zu-shu Li. Physicochemical properties and structure of titania-containing metallurgical slags: a review[J]. JOURNAL OF IRON AND STEEL RESEARCH,INTERNATIONAL, 2022, 29(2): 187-206. |
| [3] |
Wei-feng Li, Rong Zhu, Chao Feng, Bao-chen Han, Guang-sheng Wei. Influence of bottom blowing oxygen on dust emission in converter steelmaking[J]. JOURNAL OF IRON AND STEEL RESEARCH,INTERNATIONAL, 2021, 28(9): 1105-1113. |
| [4] |
Da-chao Fu, Guang-hua Wen, Xue-qin Zhu, Jun-li Guo, Ping Tang. Modification for prediction model of austenite grain size at surface of microalloyed steel slabs based on in situ observation[J]. JOURNAL OF IRON AND STEEL RESEARCH,INTERNATIONAL, 2021, 28(9): 1133-1140. |
| [5] |
Ling-zhi Yang, Hang Hu, Ze-shi Yang, Bo-tao Xue, Yu-feng Guo, Shuai Wang. A review on bath fluid flow stirring technologies in EAF steelmaking[J]. JOURNAL OF IRON AND STEEL RESEARCH,INTERNATIONAL, 2021, 28(11): 1341-1351. |
| [6] |
Bing-long Zhang, Guang-sheng Wei, Run-zao Liu, Rong Zhu, Rong-fang Su. Simulation and analysis of O2–CaO jet behavior with different shrouding fuel mediums in electric arc furnace steelmaking[J]. JOURNAL OF IRON AND STEEL RESEARCH,INTERNATIONAL, 2020, 27(11): 1259-1269. |
|
|
|
|
2022, Vol. 29 
