|
|
|
| Effects of coke charging pattern on burden movement in COREX melter gasifier based on physical simulation |
| Li-hao Han1, Yue-hua Li2, Li-ning Han3, Yan-xia Liu1, Wei-qing Huang1, Lei Cao1, Su-ci Qi1, Xin Guan1, Jian-lu Yuan1 |
1 Department of Material Engineering, Hebei College of Industry and Technology, Shijiazhuang 050091, Hebei, China
2 Department of Basic Course Teaching, Hebei College of Industry and Technology, Shijiazhuang 050091, Hebei, China
3 First Rolling Mill, Anyang Iron & Steel Co., Ltd., Anyang 455000, Henan, China |
|
|
|
|
Abstract A three-dimensional semicircle cold model of COREX melter gasifier (MG) was established, and the effects of coke charging pattern on burden movement were investigated by adopting this model. The burden flow pattern of packed bed was measured with different coke charging amounts, coke charging positions, and coke sizes. The results show that the solid flow pattern presents a change from straight line type to reverse U type and finally to W type in MG with traditional coke charging, while the burden flow pattern experiences the change from straight line type to W type with platform and finally W type under center coke charging, and the solid flow pattern presents a change from straight line type to W type with platform and finally W type under intermediate coke charging. The difference demonstrates that coke charging pattern affects the uniform descending in MG to some degree. The burden in the coke charging zone keeps a straight line descending. No matter what kind of coke charging pattern is adopted, the burden residence time is shortened with the increase in coke charging amount, and the vertex of deadman decreases obviously, which is conducive to the renewal of the deadman. The appropriate coke charging amount and coke size should be well controlled at 8.7% and 5 mm, respectively. The results are useful not only in developing further understanding of solid flow in MG but also in verifying different mathematical models, particularly the coupled discrete element method with computational fluid dynamics simulation which has been increasingly used in the literature.
|
|
Received: 27 January 2021
Published: 25 June 2022
|
|
|
|
| Cite this article: |
|
Li-hao Han,Yue-hua Li,Li-ning Han, et al. Effects of coke charging pattern on burden movement in COREX melter gasifier based on physical simulation[J]. Journal of Iron and Steel Research International, 2022, 29(6): 907-913.
|
|
|
|
| [1] |
Xin‑gang Ai, Dong Han, Sheng‑li Li, Hong‑bo Zeng, Hui‑ya Li. Optimization of flow uniformity control device for six-stream continuous casting tundish[J]. JOURNAL OF IRON AND STEEL RESEARCH,INTERNATIONAL, 2020, 27(9): 1035-1044. |
| [2] |
Jian‑ming Su, Zhi‑he Dou, Ting‑an Zhang, Yan Liu. Physical simulation of bubble refinement in the bottom blowing process with mechanical agitation[J]. JOURNAL OF IRON AND STEEL RESEARCH,INTERNATIONAL, 2020, 27(10): 1137-1144. |
| [3] |
Li-hao HAN,Zhi-guo LUO,Heng ZHOU,Zong-shu ZOU,Yu-zhu ZHANG,. Influence of Cohesive Zone Shape on Solid Flow in COREX Melter Gasifier by Discrete Element Method[J]. Chinese Journal of Iron and Steel, 2015, 22(4): 304-310. |
| [4] |
Jun-jie SUN,Zhi-guo LUO,Zhan-xia DI,Tao ZHANG,Heng ZHOU,Zong-shu ZOU. Definition of Raceway Boundary Using Fractal Theory[J]. Chinese Journal of Iron and Steel, 2015, 22(1): 36-41. |
| [5] |
HAN Li-hao,LUO Zhi-guo,ZHOU Xiao-lei,ZHOU Heng,ZOU Zong-shu,ZHANG Yu-zhu. Influence of Burden Distribution on Temperature Distribution in COREX Melter Gasifier[J]. Chinese Journal of Iron and Steel, 2013, 20(3): 30-35. |
| [6] |
LI Hai-feng,LUO Zhi-guo,ZOU Zong-shu,SUN Jun-jie,HAN Li-hao,DI Zhan-xia. Mathematical Simulation of Burden Distribution in COREX Melter Gasifier by Discrete Element Method[J]. Chinese Journal of Iron and Steel, 2012, 19(9): 36-42. |
|
|
|
|
2022, Vol. 29 
