|
|
|
| Analysis of longitude profiled rolling process of Cu/Al cladded sheet and evaluation of outlet warpage |
| Jing-na Sun1, Chi Chen2, Shuo Wang3, Guan-nan Liu1, Hua-gui Huang1 |
1 National Engineering Research Center for Equipment and Technology of Cold Strip Rolling, Yanshan University, Qinhuangdao 066004, Hebei, China
2 Xinxiang Aviation Industry (Group) Co., Ltd., Xinxiang 453000, Henan, China
3 Harbin Dongan Engine Co., Ltd., Harbin 150060, Heilongjiang, China |
|
|
|
|
Abstract Longitude profiled cladded sheet is obtained by rolling bimetal cladded sheet with variable gauge rolling technology. The longitude profiled rolling process of Cu/Al cladded sheets was studied by finite element method and experiments. The rolling force rises with the increase in reduction, and a sudden change appears at the end of the thickness variation zone. The thickness ratio of copper layer is enlarged after rolling owing to its relatively large deformation resistance and continues to rise with the increase in reduction rate. Lower elongation of copper side leads to the warpage of exit metal to copper side, which further hinders the deformation of copper. The influence of asymmetric rolling parameters indicates that increasing the work roll diameter ratio, speed radio, and friction coefficient on Al side can reduce the warpage when the reduction rate is below a certain value depending on the thickness ratio and other rolling parameters. Comparison of experiments and simulation results showed good agreement and verified the finite element model.
|
|
Received: 28 January 2021
Published: 25 June 2022
|
|
|
|
| Cite this article: |
|
Jing-na Sun,Chi Chen,Shuo Wang, et al. Analysis of longitude profiled rolling process of Cu/Al cladded sheet and evaluation of outlet warpage[J]. Journal of Iron and Steel Research International, 2022, 29(6): 973-982.
|
|
|
|
| [1] |
Teng Xu, Dong‑xiao Hou, Zheng‑nan Sun, Da‑wu Guo. Vibration characteristics of multi-parametric excitations and multi-frequency external excitations of rolling mill under entry thickness fuctuation of strip[J]. JOURNAL OF IRON AND STEEL RESEARCH,INTERNATIONAL, 2020, 27(5): 517-527. |
| [2] |
Zhi-bing Chu, Zhan-yuan Xue, Duo Zhang, Huan-zhu Wang, Wei Li, Ren-huai Liu, Qing-xue Huang. Parameters of cold pilgering of seamless steel tube[J]. JOURNAL OF IRON AND STEEL RESEARCH,INTERNATIONAL, 2019, 26(6): 593-601. |
| [3] |
Dian-hua ZHANG,Jian-zhao CAO,Jiu-jing XU,Wen PENG,De-wen ZHAO. Simplified Weighted Velocity Field for Prediction of Hot Strip Rolling Force by Taking into Account Flattening of Rolls[J]. Chinese Journal of Iron and Steel, 2014, 21(7): 637-643. |
| [4] |
Jian-zhao CAO,De-wen ZHAO,Shun-hu ZHANG,Wen PENG,Shu-zong CHEN,Dian-hua ZHANG. Analysis of Hot Tandem Rolling Force with Logarithmic Velocity Field and EA Yield Criterion[J]. Chinese Journal of Iron and Steel, 2014, 21(3): 295-299. |
| [5] |
Nuan-nuan PEI,Guo-ming ZHU,Bo LI,Gong-ming TAO,Yong-lin KANG. 3D Thermo-mechanical Coupled Simulation of Whole Rolling Process for 60 kg/m Heavy Rail[J]. Chinese Journal of Iron and Steel, 2014, 21(12): 1104-1110. |
| [6] |
Su-wen CHEN,,Hong-min LIU,,Yan PENG,,Jian-liang SUN,. Slab Analysis of Large Cylindrical Shell Rolling[J]. Chinese Journal of Iron and Steel, 2014, 21(1): 1-8. |
|
|
|
|
2022, Vol. 29 
