|
|
|
| Effect of die structure parameters on deformation behavior of bent tube in free bending process |
| Wei Wang1, Cheng Cheng1,2, Li Wan3, Jie Tao1, Xun-zhong Guo1, Chun-mei Liu1 |
| 1 College of Material Science and Technology, Nanjing University of Aeronautics and Astronautics, Nanjing 211100, Jiangsu, China; 2 State Key Laboratory of Digital Manufacturing Equipment and Technology, Huazhong University of Science and Technology, Wuhan 430074, Hubei, China; 3 Capital Aerospace Machinery Corporation, Beijing 100076, China |
|
|
|
|
Abstract The bending section of tube between the bending die and the guider is in a less constrained state during the free bending process. The free bending dies have the important impact on the plastic deformation behavior and the forming quality of tube. To study the evolution law of the deformation behavior of tube with the die structure parameters and optimize the free bending die parameters, the free bending experiments and the corresponding numerical simulations were carried out. The design principle of free bending die was illustrated. The free bending experiment was conducted to verify the reliability of the numerical simulation method. Based on the numerical simulation results, the influence of the distance between the center point of bending die and the front end of guider on the forming quality of bent tube is more obvious than that of the fillet of guider. However, the fillet of bending die hardly affects the stress and strain distribution and the evolution of the wall thickness. Finally, the free bending experiments with the newly determined free bending dies were conducted. The ultimate bending radius of bent tube is reduced and the forming quality is improved.
|
|
|
|
|
|
| Cite this article: |
|
Wei Wang,Cheng Cheng,Li Wan, et al. Effect of die structure parameters on deformation behavior of bent tube in free bending process[J]. Journal of Iron and Steel Research International, 2023, 30(03): 487-503.
|
|
|
|
| [1] |
Ming Zhong, Lei Jiang, Hang-yu Bai, Somnath Basu, Zhan-jun Wang, Cong Wang. Simulating molten pool features of shipbuilding steel subjected to submerged arc welding[J]. JOURNAL OF IRON AND STEEL RESEARCH,INTERNATIONAL, 2023, 30(03): 569-579. |
| [2] |
Yi-bo He, Wen-ke Guo, Yi-hong Li, Guang-ming Liu, Xin Cui. Numerical simulation of flow characteristics of side-bottom combined blowing in iron bath reactor[J]. JOURNAL OF IRON AND STEEL RESEARCH,INTERNATIONAL, 2023, 30(02): 236-248. |
| [3] |
Xu-feng Qin, Chang-gui Cheng, Yang Li, Wei-li Wu, Yan Jin. Effects of argon blowing at tundish upper nozzle on multiphase flow behavior in nozzle[J]. JOURNAL OF IRON AND STEEL RESEARCH,INTERNATIONAL, 2022, 29(4): 588-600. |
| [4] |
Qi-peng Dong, Jiong-ming Zhang, Yan-bin Yin, Hiromi Nagaumi. Numerical simulation of macrosegregation in billet continuous casting influenced by electromagnetic stirring[J]. JOURNAL OF IRON AND STEEL RESEARCH,INTERNATIONAL, 2022, 29(4): 612-627. |
| [5] |
Pin Shao, Shi-xu Liu, Xin-cheng Miao. CFD-PBM simulation of bubble coalescence and breakup in top blown-rotary agitated reactor[J]. JOURNAL OF IRON AND STEEL RESEARCH,INTERNATIONAL, 2022, 29(2): 223-236. |
| [6] |
Fei Li, Li-wen Zhang, Chi Zhang, Kang-jie Song, Pei-gang Mao. Numerical simulation on recrystallization behavior and microstructure evolution during hot continuous rolling process of 38CrMoAl steel rod[J]. JOURNAL OF IRON AND STEEL RESEARCH,INTERNATIONAL, 2022, 29(10): 1633-1645. |
|
|
|
|
2023, Vol. 30 
