|
|
Effect of magnesium on microstructure and properties of 440C stainless bearing steel melted under pressurized conditions |
Yang Li1, Chang-yong Chen1, Qi Wang1, Hao Yang1, Shuai Ma1, Meng Sun1, Zhou-hua Jiang1 |
1 School of Metallurgy, Northeastern University, Shenyang 110819, Liaoning, China |
|
|
Abstract The effects of magnesium (Mg) on the microstructure and properties of 440C stainless bearing steel melted under pressurized conditions were studied. Adding Mg improved the cleanliness of molten steel, modified the inclusions in steel, enhanced the distribution of carbides, and improved the mechanical properties and corrosion resistance of experimental steel. In detail, the contents of TO, S, and N in steel decreased from 0.0013 to 0.0003 wt.%, from 0.0032 to 0.0018 wt.% and from 0.0088 to 0.0049 wt.%, respectively. In addition, the transformation order of oxide inclusions in steel is Al2O3 → MgO∙Al2O3 → MgO, where the content of Mg in steel sharply increased from 0.00 to 29 × 10-4, 81 × 10-4, and 160 × 10-4 wt.%, and the transformation order of S-containing inclusions in steel is MnS → Mg–S–Mn(–MgO) → Mg–O–S. Moreover, the number and size of inclusions and the proportion of large-size inclusions in steel decreased rapidly. Furthermore, the network structure of carbides in steel collapsed, the size of carbides was reduced, and the distribution was more uniform. Finally, the tensile strength, impact toughness, and pitting corrosion resistance of the experimental steel were significantly improved.
|
Received: 29 March 2022
Published: 25 April 2023
|
|
|
|
Cite this article: |
Yang Li,Chang-yong Chen,Qi Wang, et al. Effect of magnesium on microstructure and properties of 440C stainless bearing steel melted under pressurized conditions[J]. Journal of Iron and Steel Research International, 2023, 30(4): 808-824.
|
|
|
|
[1] |
Cheng-song Liu, Wei Liu, Hua Zhang, Hong-wei Ni. Transformation of nanoscale inclusions in 316L stainless steel processed by laser beam powder bed fusion during isothermal heating[J]. JOURNAL OF IRON AND STEEL RESEARCH,INTERNATIONAL, 2023, 30(4): 795-807. |
[2] |
Kai Yang, Yi Luo, Wei Li, Li Wang, Zhong-qu Sun, Jun-liang Liu, Xue-jun Jin. Competitive role of film-like austenite and transition carbides on hydrogen embrittlement resistance and impact toughness in bainite-containing quenched and partitioned steel[J]. JOURNAL OF IRON AND STEEL RESEARCH,INTERNATIONAL, 2023, 30(4): 782-794. |
[3] |
Jun-yu Liu, Cheng-song Liu, Rui-juan Bai, Wei Wang, Qing-bo Wang, Hua Zhang, Hong-wei Ni. Morphological transformation of elongated MnS inclusions in non-quenched and tempered steel during isothermal heating[J]. JOURNAL OF IRON AND STEEL RESEARCH,INTERNATIONAL, 2023, 30(03): 525-536. |
[4] |
Xin Liu, Yan-ping Bao, Cheng-jian Hua, Jian-hua Chu, Chao Gu, Min Wang. Denaturation behavior of inclusions in industrial pure iron by calcium treatment[J]. JOURNAL OF IRON AND STEEL RESEARCH,INTERNATIONAL, 2023, 30(02): 249-258. |
[5] |
Man Liu, Jun-yu Tian, Feng Cai, Cheng-gang Pan, Guang Xu. Chro-austempering treatment of a medium-carbon high-strength bainitic steel[J]. JOURNAL OF IRON AND STEEL RESEARCH,INTERNATIONAL, 2023, 30(02): 317-327. |
[6] |
Jin-long Wang, Sheng-qiang Song, Zheng-liang Xue, Dai Tang, Gang Tong, Dong-ming Liu. Nitride-inclusion characterization in lightweight steel and reprecipitation behavior of AlN during heat treatment: effect of Al content[J]. JOURNAL OF IRON AND STEEL RESEARCH,INTERNATIONAL, 2023, 30(02): 350-362. |
|
|
|
|