|
|
Extended-state-observer-based robust torsional vibration suppression for rolling mill main drive system with input saturation |
Jia-qiang Chen1, Shu-zong Chen1, Chang-chun Hua1,2, Cheng Jia1, Cheng Qian1,2 |
1 Institute of Electrical Engineering, Yanshan University, Qinhuangdao 066004, Hebei, China 2 National Engineering Research Center for Equipment and Technology of Cold Strip Rolling, Yanshan University, Qinhuangdao 066004, Hebei, China |
|
|
Abstract A robust torsional vibration suppression strategy is proposed for the main drive system of the rolling mill subject to uncertainties, disturbances and input saturation. With given model information incorporated into observer design, an extended state observer that relies only on roller speed measurements is developed to estimate the system states and lumped uncertainties of the rolling mill main drive system. To handle the motor torque saturation, an auxiliary signal system with the same order as the plant is constructed. The error between the control input and plant input is taken as the input of the constructed auxiliary system, and a number of signals are generated to compensate for the effect of the motor torque saturation. Furthermore, a robust output feedback controller is introduced to obtain better transient and steady-state performance of the rolling mill main drive system and the stability of the closed-loop system is strictly proved via Lyapunov theory. Finally, comparative simulations are performed to verify the effectiveness and superiority of the proposed control strategy.
|
|
|
|
|
Cite this article: |
Jia-qiang Chen,Shu-zong Chen,Chang-chun Hua, et al. Extended-state-observer-based robust torsional vibration suppression for rolling mill main drive system with input saturation[J]. Journal of Iron and Steel Research International, 2023, 30(05): 985-993.
|
|
|
|
[1] |
Dong-ping He, Hui-dong Xu, Ming Wang, Tao Wang, Chao-ran Ren, Zhi-hua Wang. Application of dynamic vibration absorber for vertical vibration control of corrugated rolling mill[J]. JOURNAL OF IRON AND STEEL RESEARCH,INTERNATIONAL, 2023, 30(4): 736-748. |
[2] |
Jie-bin Qi, Xin-xin Wang, Xiao-qiang Yan. Influence of mill modulus control gain on vibration in hot rolling mills[J]. JOURNAL OF IRON AND STEEL RESEARCH,INTERNATIONAL, 2020, 27(5): 528-536. |
[3] |
Ming Zhang, Yan Peng, Jian-liang Sun, Hao-ran Li. Dynamics of rolling mill drive system considering arc tooth gear dynamic characteristics[J]. JOURNAL OF IRON AND STEEL RESEARCH,INTERNATIONAL, 2019, 26(9): 953-961. |
[4] |
Xiao-qiang Yan, Jie-bin Qi, Xin-xin Wang . An active method suppressing rolling mill vibration: disturbance estimation and compensation algorithm[J]. JOURNAL OF IRON AND STEEL RESEARCH,INTERNATIONAL, 2019, 26(7): 697-703. |
[5] |
Xin ZHANG,Shu-zong CHEN,Hao-yu ZHANG,Xi-wen ZHANG,Dian-hua ZHANG,Jie SUN. Modeling and Analysis of Interstand Tension Control in 6-high Tandem Cold Rolling Mill[J]. Chinese Journal of Iron and Steel, 2014, 21(9): 830-836. |
[6] |
Yong-jiang ZHENG,Guang-xian SHEN,Yi-geng LI,Ming LI,Hong-min LIU. Spatial Vibration and Its Numerical Analytical Method of Four-high Rolling Mills[J]. Chinese Journal of Iron and Steel, 2014, 21(9): 837-843. |
|
|
|
|