|
|
|
| Review on effect of applied internal cooling source and vibration on metal solidification process |
| Yu-chao Yao1,2, Miao Liu1,2, Zhong-qiu Liu1,2,3, Bao-kuan Li2, Yong Gan3 |
| 1 Key Laboratory for Ecological Metallurgy of Multimetallic Mineral (Ministry of Education), Northeastern University, Shenyang 110819, Liaoning, China; 2 School of Metallurgy, Northeastern University, Shenyang 110819, Liaoning, China 3 China Iron & Steel Research Institute Group Co., Ltd., Beijing 100081, China |
|
|
|
|
Abstract Advancements in metallurgical technology have led to the emergence of high-performance requirements for metal materials, like high uniformity, high purity, and superfine crystallinity. This has resulted in the development and application of internal cooling source (ICS), vibrational, and vibrational internal cooling source methods in metal solidification processes to afford products with refined crystal grains and large proportions of equiaxed crystals. These methods have gradually been introduced into laboratories and some steel mills over the past few decades. However, there are few successful industrial applications of these methods, as there is no comprehensive understanding of their control theories and principles. Accordingly, the development, basic principles, and classifications of the three types of methods are summarized, and their impact on the solidification of molten metals and the morphology of solid products is discussed. In addition, experimental and numerical simulation-based researches on each type of method are reviewed and their prospects for applications are briefly discussed to control metal solidification. Finally, detailed future perspectives are provided on vibratory strip feeding, ICS, and pulsed magneto-oscillation methods. Hopefully, it will serve as a reference for future studies of the application of these and related methods in metal solidification processes.
|
|
|
|
|
|
| Cite this article: |
|
Yu-chao Yao,Miao Liu,Zhong-qiu Liu, et al. Review on effect of applied internal cooling source and vibration on metal solidification process[J]. Journal of Iron and Steel Research International, 2023, 30(6): 1059-1072.
|
|
|
|
| [1] |
Rui-song Tan, Wei Liu, Bo Song, Shu-feng Yang, Yong-feng Chen, Xiao-tan Zuo, Yan Huang. Numerical simulation on solidification behavior and structure of 38CrMoAl large round bloom using CAFE model[J]. JOURNAL OF IRON AND STEEL RESEARCH,INTERNATIONAL, 2023, 30(6): 1222-1233. |
| [2] |
Dan-qing Jiang, Shu-jian Sun, Han Wu, Yang-jian Xu, Fu-hai Zhu, Zhen-qiang Zhang, Jiang Wang, Zhong-ming Ren. Influence of mechanical reduction amount on internal quality of continuous casting billets by thermal and numerical simulation[J]. JOURNAL OF IRON AND STEEL RESEARCH,INTERNATIONAL, 2023, 30(6): 1234-1243. |
| [3] |
Yang Liu, Jian-hua Liu, Yang He. Microstructure evolution in large billet during reduction pretreatment based on laboratory experiments[J]. JOURNAL OF IRON AND STEEL RESEARCH,INTERNATIONAL, 2023, 30(6): 1244-1257. |
| [4] |
Dong-bin Jiang, Fu-zhong Yang, Jian Zhang, Yang Zhou, Li-feng Zhang. Effect of feeding parameters on ingot segregation and shrinkage pore in vacuum arc remelting[J]. JOURNAL OF IRON AND STEEL RESEARCH,INTERNATIONAL, 2023, 30(6): 1268-1278. |
| [5] |
Kui-song Zhu, Li Cao, Ying-tao Zhao, Jun Wang, Xiang-kui Cheng. Mechanism of primary Si and Fe-segregation for a hypereutectic 90 wt.% Si–Ti alloy melt in directional solidification via electromagnetism[J]. JOURNAL OF IRON AND STEEL RESEARCH,INTERNATIONAL, 2023, 30(4): 726-735. |
| [6] |
Dong-ping He, Hui-dong Xu, Ming Wang, Tao Wang, Chao-ran Ren, Zhi-hua Wang. Application of dynamic vibration absorber for vertical vibration control of corrugated rolling mill[J]. JOURNAL OF IRON AND STEEL RESEARCH,INTERNATIONAL, 2023, 30(4): 736-748. |
|
|
|
|
2023, Vol. 30 
