|
|
Mechanism of ferrite nucleation induced by Y2O2S inclusion in low carbon steel |
Hai-hui Zhang1, Hui-hui Xiong1, Jing Qin1, Jian-bo Zhang1,2 |
1 Faculty of Materials, Metallurgy and Chemistry, Jiangxi University of Science and Technology, Ganzhou 341000, Jiangxi, China; 2 National Rare Earth Functional Material Innovation Center, Ganzhou 341000, Jiangxi, China |
|
|
Abstract To reveal the mechanism of ferrite nucleation induced by Y2O2S inclusion in steel, the work of adhesion, interfacial energy, structure stability and electronic properties of Fe(111)/YY2O2S(001) interfaces with various terminations were first investigated using the first-principles calculations. Secondly, the steels with and without yttrium were prepared, while the rare earth yttrium-based inclusions in low carbon steel were characterized using an electron probe micro-analyzer, and the grain size of steel was analyzed using a scanning electron microscope with electron backscattered diffraction. The results show that the bonding strength of Fe/Y2O2S interfaces with S- and Y-terminations is stronger than that of the interface with O-terminations. The Fe–hcp–S interfaces with S-termination have the highest work of adhesion (4.01 J/m2) and the lowest interface distance (1.323 Å ). The Fe–hcp–S interface exhibits the highest stability, and its interfacial bonding force is mainly attributed to the strong hybridization of Fe-3d and S-2p orbitals in the energy range of - 7.5–0 eV. Moreover, the interfacial energy of Fe–hcp–S is substantially lower than those of the ferrite(s)/Fe(L) interface and the ferrite–austenite interface, suggesting that Y2O2S inclusions in steel can efficiently promote ferrite nucleation. The experimental observations demonstrate that the ferrite grain size of steel containing 0.03 wt.% Y is much more refined than that of the steel without yttrium, and the average grain size of steel with and without Y is 102 and 258 μm, respectively. This indicates that the results of our calculations match with experimental findings.
|
|
|
|
|
Cite this article: |
Hai-hui Zhang,Hui-hui Xiong,Jing Qin, et al. Mechanism of ferrite nucleation induced by Y2O2S inclusion in low carbon steel[J]. Journal of Iron and Steel Research International, 2023, 30(6): 1291-1299.
|
|
|
|
[1] |
Yu-chao Yao, Miao Liu, Zhong-qiu Liu, Bao-kuan Li, Yong Gan. Review on effect of applied internal cooling source and vibration on metal solidification process[J]. JOURNAL OF IRON AND STEEL RESEARCH,INTERNATIONAL, 2023, 30(6): 1059-1072. |
[2] |
Yi-peng Sun, Hao-jian Duan, Li-feng Zhang. A boundary layer model for capture of inclusions by steel–slag interface in a turbulent flow[J]. JOURNAL OF IRON AND STEEL RESEARCH,INTERNATIONAL, 2023, 30(6): 1101-1108. |
[3] |
Qi Quan, Zhi-xiao Zhang, Tian-peng Qu, Xiang-long Li, Jun Tian, De-yong Wang. Physical and numerical investigation on fluid flow and inclusion removal behavior in a single-strand tundish[J]. JOURNAL OF IRON AND STEEL RESEARCH,INTERNATIONAL, 2023, 30(6): 1182-1198. |
[4] |
Pu Wang, Hong Xiao, Xi-qing Chen, Hai-yan Tang, Jia-quan Zhang. Effect of channel diameter on magneto-thermal conversion ratio and consistency of each strand in a multi-strand induction heating tundish[J]. JOURNAL OF IRON AND STEEL RESEARCH,INTERNATIONAL, 2023, 30(6): 1199-1210. |
[5] |
Qing-hua Xie, Pei-yuan Ni, Toshihiro Tanaka, Mikael Ersson, Ying Li. Flow field, heat transfer and inclusion behavior in a round bloom mold under effect of a swirling flow submerged entry nozzle[J]. JOURNAL OF IRON AND STEEL RESEARCH,INTERNATIONAL, 2023, 30(6): 1211-1221. |
[6] |
Yang Liu, Jian-hua Liu, Yang He. Microstructure evolution in large billet during reduction pretreatment based on laboratory experiments[J]. JOURNAL OF IRON AND STEEL RESEARCH,INTERNATIONAL, 2023, 30(6): 1244-1257. |
|
|
|
|