|
|
|
| Deformation resistance prediction of tandem cold rolling based on grey wolf optimization and support vector regression |
| Ze-dong Wu1, Xiao-chen Wang1, Quan Yang1, Dong Xu1, Jian-wei Zhao1, Jing-dong Li1, Shu-zong Yan1 |
| 1 National Engineering Technology Research Center of Flat Rolling Equipment, University of Science and Technology Beijing, Beijing 100083, China |
|
|
|
|
Abstract In the traditional rolling force model of tandem cold rolling mills, the calculation of the deformation resistance of the strip head does not consider the actual size and mechanical properties of the incoming material, which results in a mismatch between the deformation resistance setting and the actual state of the incoming material and thus affects the accuracy of the rolling force during the low-speed rolling process of the strip head. The inverse calculation of deformation resistance was derived to obtain the actual deformation resistance of the strip head in the tandem cold rolling process, and the actual process parameters of the strip in the hot and cold rolling processes were integrated to create the cross-process dataset as the basis to establish the support vector regression (SVR) model. The grey wolf optimization (GWO) algorithm was used to optimize the hyperparameters in the SVR model, and a deformation resistance prediction model based on GWO–SVR was established. Compared with the traditional model, the GWO–SVR model shows different degrees of improvement in each stand, with significant improvement in stands S3–S5. The prediction results of the GWO–SVR model were applied to calculate the head rolling setting of a 1420 mm tandem rolling mill. The head rolling force had a similar degree of improvement in accuracy to the deformation resistance, and the phenomenon of low head rolling force setting from stands S3 to S5 was obviously improved. Meanwhile, the thickness quality and shape quality of the strip head were improved accordingly, and the application results were consistent with expectations.
|
|
|
|
|
|
| Cite this article: |
|
Ze-dong Wu,Xiao-chen Wang,Quan Yang, et al. Deformation resistance prediction of tandem cold rolling based on grey wolf optimization and support vector regression[J]. Journal of Iron and Steel Research International, 2023, 30(09): 1803-1820.
|
|
|
|
| [1] |
Zong-xin Chen, Hui Liu, Long Qi. Feature selection of BOF steelmaking process data by using an improved grey wolf optimizer[J]. JOURNAL OF IRON AND STEEL RESEARCH,INTERNATIONAL, 2022, 29(08): 1205-1223. |
| [2] |
Chuang Gao, Ming-gang Shen, Xiao-ping Liu, Nan-nan Zhao, Mao-xiang Chu. End-point dynamic control of basic oxygen furnace steelmaking based on improved unconstrained twin support vector regression[J]. JOURNAL OF IRON AND STEEL RESEARCH,INTERNATIONAL, 2020, 27(1): 42-54. |
| [3] |
Jin-shan CHEN, Chang-sheng LI. Prediction and Control of Thermal Scratch Defect on Surface of Strip in Tandem Cold Rolling[J]. Chinese Journal of Iron and Steel, 2015, 22(2): 106-114. |
| [4] |
Xin ZHANG,Shu-zong CHEN,Hao-yu ZHANG,Xi-wen ZHANG,Dian-hua ZHANG,Jie SUN. Modeling and Analysis of Interstand Tension Control in 6-high Tandem Cold Rolling Mill[J]. Chinese Journal of Iron and Steel, 2014, 21(9): 830-836. |
| [5] |
YANG Jing-ming;ZHANG Qing;CHE Hai-jun;et al. Multi-Objective Optimization for Tandem Cold Rolling Schedule[J]. Chinese Journal of Iron and Steel, 2010, 17(11): 34-39. |
| [6] |
YANG Jingming;CHE Haijun;DOU Fuping;ZHOU Tao. Genetic AlgorithmBased Optimization Used in Rolling Schedule[J]. Chinese Journal of Iron and Steel, 2008, 15(2): 18-0. |
|
|
|
|
2023, Vol. 30 
