|
|
Strengthening and control of second-phase particle precipitation in ferritic/austenitic/martensitic heat-resistant alloys: a review |
Xue-cheng Peng1,2, Han-jie Guo1,2, Xin-fang Zhang1, Yi-wa Luo1,2, Ye Sun1,2, Jing Guo1,2, Rong-guang Yang3, Xiao-dan Zheng3 |
1 School of Metallurgical and Ecological Engineering, University of Science and Technology Beijing (USTB), Beijing 100083, China
2 Beijing Key Laboratory of Special Melting and Preparation of High-End Metal Materials, University of Science and Technology Beijing (USTB), Beijing 100083, China
3 Beijing Shougang Gitane New MATERIALS Co., Ltd., Beijing 102206, China |
|
|
Guide |
|
Abstract Heat-resistant alloys with excellent mechanical properties are widely used in various fields, and further improvement in their properties is essential to meet the requirements in new-generation advanced supercritical boilers, nuclear reactors, superheaters, and other new materials applications. To effectively enhance the comprehensive performance of heat-resistant alloys, second-phase particle strengthening has been widely studied, and in the face of different service environments of advanced heat-resistant steels, the selection of suitable second-phase particles is essential to maximize the performance of these alloys. To this end, three major types of reinforcing phases in heat-resistant alloys such as carbides, rare earth oxides, and intermetallic compounds are summarized. A comparative analysis of the precipitation behavior of the reinforcing phases with different types as well as the risks and means of controlling their use in service, is presented. Key parameters for the application of various types of second-phase particles in heat-resistant alloys are provided to support the design and preparation of new ultrahigh-performance heat-resistant alloys.
|
Received: 12 August 2023
Published: 25 January 2024
|
|
|
|
|
Cite this article: |
Xue-cheng Peng,Han-jie Guo,Xin-fang Zhang, et al. Strengthening and control of second-phase particle precipitation in ferritic/austenitic/martensitic heat-resistant alloys: a review[J]. Journal of Iron and Steel Research International, 2024, 31(1): 3-23.
|
|
|
|
[1] |
An-gang Ning, Yang Liu, Rui Gao, Stephen Yue, Ming-bo Wang, Han-jie Guo. Effect of Quenching Condition on Mechanical Properties, Microstructure and Precipitation Behavior of AISI H13 Steel[J]. JOURNAL OF IRON AND STEEL RESEARCH,INTERNATIONAL, 2024, 31(1): 143-156. |
[2] |
Cheng-ming Li, Shu-jin Chen, Shan-shan Cai, Ju-bo Peng, Xiao-jing Wang, Ying-wu Wang. Microstructure and shear properties evolution of Mn-doped SAC solder joint under isothermal aging[J]. JOURNAL OF IRON AND STEEL RESEARCH,INTERNATIONAL, 2023, 30(8): 1650-1660. |
[3] |
Yang Li, Chang-yong Chen, Qi Wang, Hao Yang, Shuai Ma, Meng Sun, Zhou-hua Jiang. Effect of magnesium on microstructure and properties of 440C stainless bearing steel melted under pressurized conditions[J]. JOURNAL OF IRON AND STEEL RESEARCH,INTERNATIONAL, 2023, 30(4): 808-824. |
[4] |
Kai Yang, Yi Luo, Wei Li, Li Wang, Zhong-qu Sun, Jun-liang Liu, Xue-jun Jin. Competitive role of film-like austenite and transition carbides on hydrogen embrittlement resistance and impact toughness in bainite-containing quenched and partitioned steel[J]. JOURNAL OF IRON AND STEEL RESEARCH,INTERNATIONAL, 2023, 30(4): 782-794. |
[5] |
Chang Sun, Jing Li, Jie Zhang, Wei Yan, Shou-hui Li. Formation and evolution of primary carbides in high-carbon martensitic stainless steel[J]. JOURNAL OF IRON AND STEEL RESEARCH,INTERNATIONAL, 2023, 30(10): 2000-2009. |
[6] |
Xiao-wei Feng, Jia-xin Li, Zhi-bin Zheng, Bo Feng, Hao-kun Yang. Mechanical properties and fracture mechanism of Fe/Cu composite sheets with Al interlayer after annealing treatment[J]. JOURNAL OF IRON AND STEEL RESEARCH,INTERNATIONAL, 2023, 30(09): 1888-1895. |
|
|
|
|