|
|
Combustion mechanism of benzene in iron ore sintering process: experimental and simulation |
Zhi-gang Que1,2, Jin-ming Shi1,2, Xian-bin Ai1,2 |
1 Institute of Energy Research, Jiangxi Academy of Science, Nanchang 330096, Jiangxi, China
2 Jiangxi Carbon Neutralization Research Center, Nanchang 330096, Jiangxi, China |
|
|
Abstract Benzene is a typical component of volatile organic compounds (VOCs) in the iron ore sintering flue gas. The combustion behavior of benzene directly affects the emission of VOCs in iron ore sintering process. The effects of temperature, benzene, and oxygen concentrations on the conversion ratio of benzene were investigated by experiments and numerical simulation. The experiments were carried out in a tube reactor at temperatures of 773–1098 K, benzene concentrations of 0.01–0.03 vol.%, and oxygen concentrations of 10–21 vol.%. The numerical simulation was performed with the plug flow model in the CHEMKIN program based on a kinetic model that consists of 132 chemical species and 772 elementary steplike reactions. The experimental results reveal that increasing the temperature and benzene concentration could significantly promote benzene combustion. It is attributed to the increase in the reaction rates of all steps in the pathway for forming CO2 and H2O. In addition, due to the large equivalent ratio of oxygen to benzene, the conversion ratio of benzene remained constant at different oxygen concentrations. The simulation results were in good agreement with the experimental results and indicated that six elementary reactions dominated the formations of CO2 and H2O. The oxidations of C6H5O, CO, and C5H4O intermediates to CO2 were the limiting steps in the reaction pathways.
|
Received: 02 November 2022
Published: 25 January 2024
|
|
|
|
Cite this article: |
Zhi-gang Que,Jin-ming Shi,Xian-bin Ai. Combustion mechanism of benzene in iron ore sintering process: experimental and simulation[J]. Journal of Iron and Steel Research International, 2024, 31(1): 195-203.
|
|
|
|
[1] |
Zi-han Wang, Jing Guo, Han-jie Guo1 Bin Li. Thermodynamic and experimental study of high-temperature roasting of blast furnace gas ash for recovery of metallic zinc and iron[J]. JOURNAL OF IRON AND STEEL RESEARCH,INTERNATIONAL, 2024, 31(1): 108-120. |
[2] |
Guang-kai Yang, Chang-ling Zhuang, Yi-zhuang Li, Chen Hu, Shao-bo Li, Shao-bo Li. Enhancement of low-temperature toughness of Fe–Mn–C–Al alloy by rare earth Ce-modified inclusions[J]. JOURNAL OF IRON AND STEEL RESEARCH,INTERNATIONAL, 2024, 31(1): 157-173. |
[3] |
Xiao-bo Cui, Tian-long Liu, Zhi-bin Zheng, Zhi-qiang Guo, Kai-hong Zheng, Pei-xian Han. Effects of Ni content and tempering temperatures on microstructure and properties of medium-carbon cast steel[J]. JOURNAL OF IRON AND STEEL RESEARCH,INTERNATIONAL, 2023, 30(8): 1524-1536. |
[4] |
Yong-kuan Zhou, Jia-jie Kang, Guo Jin, Xiu-fang Cui, Jie Zhang, Guo-zheng Ma, Zhi-qiang Fu, Li-na Zhu, Ding-shun She, Yu-yun Yang. Effect of vacuum heat treatment on microstructure and corrosion behavior of HVOF sprayed AlCoCrFeNiCu high entropy alloy coatings[J]. JOURNAL OF IRON AND STEEL RESEARCH,INTERNATIONAL, 2023, 30(8): 1550-1561. |
[5] |
Da-lei Zhang1, Ran Liu, Ying-shuang Liu, Shao-hua Xing, Zong-hao He, Yao Qian, Jin-zeng Liu, Xiao-hui Dou, Xin-wei Zhang. Combined experimental and simulation study on corrosion behavior of B10 copper–nickel alloy welded joint under local turbulence[J]. JOURNAL OF IRON AND STEEL RESEARCH,INTERNATIONAL, 2023, 30(8): 1598-1612. |
[6] |
Tao Yang, Jing-shu An, Xing-wang Li, Shuang Liu, Xu Gao, Lei Ma, Jie Lei, Hong-ming Long. Effect of quaternary basicity on reduction behavior of iron-bearing dust pellets[J]. JOURNAL OF IRON AND STEEL RESEARCH,INTERNATIONAL, 2023, 30(7): 1356-1366. |
|
|
|
|