板栅连铸结晶器传热模型分析

doi:10.13228/j.boyuan.issn1005-4006.20210066

摘要
图/表
参考文献
相关文章 (15)

全文: PDF (1594 KB) HTML (1 KB)
输出: BibTeX | EndNote (RIS)

摘要传热过程决定着板栅连铸结晶器能否连续稳定地生产出合格质量的连铸板栅,根据热力学第一定律和傅里叶定律(热传导定律)对板栅连铸结晶器的热量传递进行了研究。依据板栅连铸结晶器实际结构简化模型,分别建立了冷却油、端盖以及空气稳态复合传热模型,高温铅液、连铸动模外筒以及冷却油的稳态复合传热模型,连铸动模内部冷却油的放热计算模型,进而建立了板栅连铸结晶器传热动态平衡方程;为了指导生产实际,建立了运行过程操作函数。通过板栅连铸结晶器传热过程的分析研究,对提高板栅连铸的连续稳定生产并实现板栅连铸结晶器的全自动温度控制具有一定的指导意义。

	服务

	把本文推荐给朋友
	加入我的书架
	加入引用管理器
	E-mail Alert
	作者相关文章
	冯军
	毕瑜瑜
	王菊艳
	熊金磊
	魏治千
	冶鹏亮

关键词 ：板栅, 连铸结晶器, 热力学第一定律, 热传导定律, 动态平衡方程

Abstract：Heat transfer process of continuous casting grids mold determines the acceptable quality of continuous casting grids. The heat transfer in continuous casting grids mold on the basis of the first law of thermodynamics and the Fourier law (the law of heat conduction) was analyzed and studied. According to simplified model of continuous casting grids mold established the steady-state compound heat transfer model of the cooling oil end cover air,the high temperature lead liquid and the outer cylinder of the moving mold and the cooling oil and the heat release calculation model of the cooling oil.Then the heat transfer dynamic balance equation of continuous casting mold was established. In order to guide the production practice, the operation function of operation process is established. Through the theoretical analysis of the heat transfer process of the grid continuous casting mold, this study has certain guiding significance for improving the continuous and stable production of the grid continuous casting mold and realizing the automatic temperature control of the grid continuous casting mold.

Key words： grids continuous-casting-mold first law of thermodynamics heat conduction law dynamic balance equation

收稿日期: 2021-06-06

引用本文:

冯军, 毕瑜瑜, 王菊艳, 熊金磊, 魏治千, 冶鹏亮. 板栅连铸结晶器传热模型分析[J]. 连铸, 2021, 40(6): 79-84. FENG Jun, BI Yu-yu, WANG Ju-yan, XIONG Jin-lei, WEI Zhi-qian, YE Peng-liang. Study on heat transfer model of grid continuous casting mold. CONTINUOUS CASTING, 2021, 40(6): 79-84.

链接本文:

http://www.chinamet.cn/Jweb_lz/CN/10.13228/j.boyuan.issn1005-4006.20210066 或 http://www.chinamet.cn/Jweb_lz/CN/Y2021/V40/I6/79

[1]	郑春风.铅酸蓄电池板栅材料的研究进展[J].广州化工,2018,15(6):16.
[2]	柴树松.汽车蓄电池生产方式[J].蓄电池,2001 (6):30.
[3]	万佳.薄板坯连铸连轧生产22MnB5钢的工艺研究[J].河北冶金,2018 (10):20.
[4]	李博斌.连铸工艺对M2高速钢碳化物析出的影响[J].河北冶金,2018 (12):23.
[5]	赵志刚,仇圣桃,朱荣.M2钢连铸过程中碳化物析出行为[J].材料热处理学报,2016,37(7):214.
[6]	李万全,高长银,刘江,等.蓄电池板栅连铸机研制[J].中国机械工程,2012,23(1):106.
[7]	Cattaneo E, Stumpf H, Tillmann H G, et al. Continuous casting of lead-antimony alloys [J]. Journal of Power Sources,1997,67 (1/2):283.
[8]	周欣,高明磊,李兰杰,等.连铸结晶器冷却水道腐蚀分析与控制[J].河北冶金,2019(3):35.
[9]	于百业,王志亮,冯勇,等.基于ANSYS的板栅连铸机动模主轴可靠性分析[J].机械设计与制造,2016(2):244.
[10]	姚成功,田松林,王文学.高拉速板坯结晶器设计分析[J].连铸,2018 (1):22.
[11]	谢集祥,罗钢,刘浏,等.1 850 mm×230 mm板坯连铸结晶器流场与温度场数值模拟[J].中国冶金,2020,30(2):54.
[12]	于百业,王志亮,冯勇,等.板栅连铸机连铸区热—流耦合场数值仿真研究[J].淮海工学院学报:自然科学版,2016,25(2):10.
[13]	Rang D A J, Boden D P, Lakshmi C S, et al. Manufacturing and operational issues with lead-acid batteries[J]. Journal of Power Sources,2002,(5):107.
[14]	邓小旋,潘宏伟,季晨曦,等.常规低碳钢板坯的高速连铸工艺技术[J].钢铁,2019,54(8):70.
[15]	杨世铭,陶文铨.传热学[M].北京:高等教育出版社,2012.