PMO-EMS组合调控提高铸坯均质化应用实践

doi:10.13228/j.boyuan.issn1005-4006.20220073

摘要
图/表
参考文献
相关文章 (15)

全文: PDF (3413 KB) HTML (1 KB)
输出: BibTeX | EndNote (RIS)

摘要脉冲磁致振荡(PMO)凝固均质化技术是通过促进形核并形成“结晶雨”细化凝固组织、提高铸坯均质化的一项原创技术。生产实践表明,该技术对提高连铸坯等轴晶率、降低偏析具有显著作用。将PMO与电磁搅拌(EMS)进行优化组合,利用EMS的搅拌作用,将PMO形成的“结晶雨”均匀分布于铸坯心部,消除等轴晶区偏心问题,从而大幅度提高铸坯组织对称性和均质化效果稳定性。结果表明,应用PMO-EMS组合调控技术可显著提高铸坯均质化水平,以轴承钢GCr15和齿轮钢20CrMnTi为例,等轴晶区对称性明显增加,偏析指数则可以分别控制在1.04和1.05以内。

	服务

	把本文推荐给朋友
	加入我的书架
	加入引用管理器
	E-mail Alert
	作者相关文章
	李辉成
	杨谱
	刘海宁
	徐智帅
	豆乃远
	李莉娟

关键词 ：脉冲磁致振荡, 电磁搅拌, 组合调控, 均质化, 偏析

Abstract：Pulsed magneto-oscillation(PMO) is an original homogenizing technology to refine the solidification structure and improve the homogenization of billets by promoting nucleation and forming grain rain. The production and application practice show that this technology has a significant effect on improving equiaxed grain ratio and reducing macrosegregation index of billets. In this study, an optimal combination of PMO and EMS was used to promote nucleation and form the “grain rain” effect and the stirring effect of EMS. The “grain rain” formed by PMO was dispersed evenly in the center of the billet, eliminating the eccentricity of equiaxed grain zone, thus greatly improving and stabilizingthe symmetry of solidification structureand homogenization effect of a billet and its stability. The results show that the application of PMO-EMS combined processcan significantly improve the homogenization of billets, and the central carbon of bearing steel GCr15 and gear steel 20CrMnTi can be controlled within 1.04 and 1.05, respectively.

Key words： PMO EMS combined control homogenization segregation

收稿日期: 2022-05-09

引用本文:

李辉成, 杨谱, 刘海宁, 徐智帅, 豆乃远, 李莉娟. PMO-EMS组合调控提高铸坯均质化应用实践[J]. 连铸, 2022, 41(4): 66-71. LI Hui-cheng, YANG Pu, LIU Hai-ning, XU Zhi-shuai, DOU Nai-yuan, LI Li-juan. Application of PMO-EMS combined control to improve the homogenization of casting billet. CONTINUOUS CASTING, 2022, 41(4): 66-71.

链接本文:

http://www.chinamet.cn/Jweb_lz/CN/10.13228/j.boyuan.issn1005-4006.20220073 或 http://www.chinamet.cn/Jweb_lz/CN/Y2022/V41/I4/66

[1]	李军,夏明许,胡侨丹,等.大型铸锭均质化问题及其新解[J].金属学报,2018,54(5):773.
[2]	唐龙敏,郑玉龙.电弧炉炼钢洁净化生产技术[J].冶金与材料,2018,38(6):120.
[3]	朱苗勇,邓志银.钢精炼过程非金属夹杂物演变与控制[J].金属学报,2022,58(1):28.
[4]	翟启杰,龚永勇,李仁兴.金属凝固过程与细晶技术[J].材料与冶金学报,2015,14(2):81.
[5]	张云虎,仲红刚,翟启杰.脉冲电磁场凝固组织细化和均质化技术研究与应用进展[J].钢铁研究学报,2017,29(4):249.
[6]	李莉娟,王郢,翟启杰.脉冲磁致振荡(PMO)凝固均质化技术在特殊钢中的应用[J].钢铁研究学报,2021,33(10):1018.
[7]	GONG Yong-yong, LUO Jun, JING Jin-xian, et al. Structure refinement of pure aluminum by pulse magneto-oscillation[J]. Materials Science and Engineering a, 2008,497(1/2):147.
[8]	梅国宏,朱立光,张庆军,等.脉冲磁场细晶化技术的研究现状[J].铸造技术,2015,36(2):403.
[9]	盛光敏,吕煜坤,黄振华.细晶化和余热处理抗震钢筋的高应变低周疲劳行为分析[J].功能材料,2014,45(15):15124.
[10]	刘峙麟.细晶制造科学与工程:理论、应用、发展[J].塑性工程学报,2021,28(5):1.
[11]	王涛, 张炯明, 赵新凯. 150 mm×150 mm 方坯连铸机末端电磁搅拌及拉速对铸坯内部质量的影响[J]. 连铸, 2014(6):50.
[12]	胡文豪, 朱施利. 连铸工艺参数对 GCr15 钢碳偏析的影响[J]. 钢铁, 2010, 45(11): 48.
[13]	童为硕, 李晶, 闫威. 连铸工艺参数对 SWRH82B 钢160 mm×160 mm 坯中心碳偏析的影响[J]. 特殊钢, 2018,39(4): 38.
[14]	赵军普,刘浏,范建文,等.轻压下技术及其在连铸中的研究与应用[J].材料导报,2016,30(15):57.
[15]	潘鹏,侯栋,戈文英,等.连铸坯凝固末端电磁搅拌位置及连铸工艺优化[J].连铸,2022(2):66.
[16]	郭鑫,王海达,陈列,等.末端电磁搅拌技术对高碳铬轴承钢内部偏析质量的影响[J].特钢技术,2021,27(2):22.
[17]	龚永勇,程书敏,钟玉义,等. 脉冲磁致振荡凝固均质化技术[J]. 金属学报, 2018,54(5):757.
[18]	徐燕祎,翟启杰.脉冲电磁场在金属熔体中的电磁效应及其应用[J].上海大学学报(自然科学版),2020,26(1):1.
[19]	王海洋,滕力宏,赵阳,等.PMO作用对连铸轴承钢凝固组织及碳化物的影响[J].连铸,2019 (6):32.
[20]	李辉成,刘海宁,邓向阳,等.应用PMO提高连铸坯生产拉速及成分均匀性[J].连铸,2020(4):7.
[21]	LI Hui-cheng, LIU Yu-xiang,ZHANG Yun-hu, et al. Effects of hot top pulsed magneto oscillation on solidified structure steel ingot[J]. China Foundry. 2018, 15(2):110.
[22]	曹同友,翟启杰,李仁兴,等.磁致振荡对65Mn钢铸锭内部组织的影响[J].钢铁研究,2014,42(6):35.
[23]	刘海宁,王郢,李仁兴,等.PMO凝固均质化技术在20CrMnTi齿轮钢上的应用[J].钢铁,2019,54(6):69.
[24]	仲红刚,刘海宁,徐智帅,等.脉冲磁致振荡凝固均质化技术及装备[J].钢铁,2019,54(8):174.
[25]	LIAO Xi-liang, ZHAI Qi-jie, LUO Jun, et al. Refining mechanism of the electric current pulse on the solidification structure of pure aluminum[J]. Acta Materialia, 2007,55(9):3103.
[26]	GONG Y Y, CHENG S M, ZHONG Y Y, et al. Influence of electromagnetic parameters on solidification structureof pure Al in the case of identical power[J]. Journal of Iron and Steel Research International, 2018, 25(8):854.
[27]	LIU T Y, SUN J, SHENG C, et al. Influence of pulse magneto-oscillation on the efficiency of grain refiner[J]. Advances in Manufacturing, 2017, 5(2): 143.
[28]	GONG Y Y, LUO J, JING J X, et al. Structure refinement of pure aluminum by pulse magneto-oscillation[J]. Materials Science and Engineering A, 2008, 497(1/2):147.
[29]	YIN Z X, GONG Y Y, LI B, et al. Refining of pure aluminum cast structure by surface pulsed magneto-oscillation[J]. Journal of Materials Processing Technology, 2012, 212(12): 2629.
[30]	XU Y Y, ZHAO J, YE C Y, et al. Distributions of electromagnetic fields and forced flow and their relevance to the grain refinement in Al-Si alloy under the application of pulsed magneto-oscillation[J]. Acta Metallurgica Sinica (English Letters), 2022, 35(2):254.
[31]	郝军利,赵静,仲红刚,等.PMO作用下连铸二冷区电磁场-流场-温度场的数值模拟[J].上海大学学报(自然科学版),2018,24(3):412.
[32]	ZHAO J, CHENG Y, HAN K, et al. Numerical and experimental studies of surface-pulsed magneto-oscillation on solidification[J]. Journal of Materials Processing Technology, 2016, 229: 286.
[33]	ZHAO Z, QIN R S. Inclusion agglomeration in electrified molten metal: Thermodynamic consideration[J]. Materials Science and Technology,2017:1.
[34]	LIANG D, LIANG Z, ZHAI Q, et al. Nucleation and grain formation of pure Al under Pulsed Magneto-Oscillation treatment[J]. Materials Letters, 2014, 130: 48.
[35]	Edry I, Frage N, Hayun S. The effect of pulse magneto-oscillation treatment on the structure of aluminum solidified under controlled convection[J]. Materials Letters, 2016, 182:118.