Application and development of inclusion control and removal technology in Ansteel
KANG Wei1,2, LI Hong1,2, LIAO Xiangwei1,2, ZHU Xiaolei1,2, YANG Ji1,2
1. Key Laboratory of Metal Materials for Marine Equipment and Application, Anshan 114009, Liaoning, China; 2. Ansteel Group Iron and Steel Research Institute,Anshan 114009,Liaoning,China
Abstract:Inclusions have significant impact on the performance and surface quality of steel.Various attempts and studies have been made focus on inclusion control and removal. Such as injecting ultrafine CaO powder into molten steel,adding ultrafine powder composite balls into molten steel, as well as industrial trial on injecting ultrafine CaO powder into molten steel and adding composite balls into molten steel at RH.Circular composite inclusions are formed in the molten steel by injecting ultrafine CaO powder into molten steel or adding ultrafine powder composite balls,and most of them aggregating and floating out of steel.Most of inclusions in the slab are circular and size around 2 μm after injecting ultra-fine CaO powder, the numerical density and area percentage content of the inclusions decrease significantly of EH36 steel. T[O] significantly decrease after adding composite balls into automobile plate steel, the lowest T[O] reach 0.001 3% in tundish and 0.000 5% in the slab.
康伟, 栗红, 廖相巍, 朱晓雷, 杨骥. 夹杂物控制与去除技术在鞍钢的应用发展[J]. 连铸, 2024, 43(1): 78-84.
KANG Wei, LI Hong, LIAO Xiangwei, ZHU Xiaolei, YANG Ji. Application and development of inclusion control and removal technology in Ansteel. CONTINUOUS CASTING, 2024, 43(1): 78-84.
ZHANG K L,WU K M,OLEG ISAYEV, et al. Effects of different deoxidization methods on high-temperature physical properties of high-strength low-alloy steels[J]. High Temperature Materials and Processes,2020,39(1):157.
[11]
LOU H N,WANG C,WANG B X,et al. Inclusion evolution behavior of Ti-Mg oxide metallurgy steel and its effect on a high heat input welding HAZ[J]. Metals,2018,8(7):534.
[12]
MIN Y,LI X B,YU Z, et al. Characterization of the acicular ferrite in Al-deoxidized low-carbon steel combined with Zr and Mg additions[J]. Steel Research International,2016,87(11):1503.
CHEN K L, WANG D Y, HOU D,et al. Effect of interfacial properties on agglomeration of inclusions in molten steels[J]. ISIJ International,2019,59(10):1735.
[20]
ZHENG L C, MALFLIET ANNELIES, YAN B Q,et al. Role of interfacial properties in the evolution of non-metallic inclusions in liquid steel[J].ISIJ International,2022,62(8):1573.
TOSHIHIRO TANAKA, HIROKI GOTO, MASASHI NAKAMOTO,et al.Dynamic changes in interfacial tension between liquid Fe alloy and molten slag induced by chemical reactions[J].ISIJ International.2016,56(6).944.