|
|
Cause analysis and measures of unqualified detection for Angang plate |
Sheng-Wei ZHANG MAO Jin-Hua |
|
|
|
Abstract Sampling from the unqualified detection plate, through macro examination, metallographic analysis, cutting test and hydrogen content measurement, main causes for unqualified detection were attained: higher hydrogen content,MnS inclusion in steel, serious slab loosen segregation and faster cooling speed after rolling etc.Pre-desulphurization for hot metal, Ca treatment for MnS inclusion control in steel,vacuum degassing in VD furnace, caster roll and soft reduction parameter adjustment,slab and steel plate pilling up for slow cooling .etc. were adapted, the qualified detection rate of heavy plate increased by 12%.
|
Received: 22 March 2010
|
|
|
|
[1] |
WEN Xin1,REN Ying1,ZHANG Lifeng2. Cleanliness of GCr15 bearing steel refined by RH and VD vacuum processes[J]. JOURNAL OF IRON AND STEEL RESEARCH , 2022, 34(7): 613-621. |
[2] |
ZHAO Xianjiu1,2,ZHANG Jieyu2,3,LI Chuanjun2,3. Analysis of formation mechanism about Ca-Mg-Al spineltype inclusions in cold thin rolling sheet[J]. JOURNAL OF IRON AND STEEL RESEARCH , 2022, 34(7): 664-671. |
[3] |
YANG Jian, LI Ting-ting. Research progress on inclusion control of non-oriented silicon steel with REM treatment[J]. Iron and Steel, 2022, 57(7): 1-15. |
[4] |
DU Yi-nuo, GUO Lei, YANG Yang, ZHANG Shuai, YU Han-zhang, GUO Zhan-cheng. Numerical simulation of inclusions floating behavior under supergravity field in liquid steel[J]. Iron and Steel, 2022, 57(7): 54-62. |
[5] |
GUO Shuai, ZHU Hang-yu, ZHOU Jie, DONG Shuai, LIANG Yin. Effects of inclusions on stress field in low-density steel under compressive loading[J]. Iron and Steel, 2022, 57(7): 63-72. |
[6] |
LI Jipeng1,2, WANG Liang1, CHENG Shusen1, LIU Zhao1, CHEN Haoyu1, LIU Yong1. Thermodynamic study on calcium treatment of “liquid phase window” and inclusions modification[J]. JOURNAL OF IRON AND STEEL RESEARCH , 2022, 34(6): 523-533. |
|
|
|
|