|
|
Causes Analysis on the Surface Longitudinal cracks |
|
|
|
Abstract Some longitudinal cracks on the surface of the continuous cast slab SS400 were detected. The slabs with these cracks were analyzed by the means of high temperature plasticity , macrostructure, microstructure and inclusion test. The results showed that the reasons caused the surface longitudinal cracks included the high content of [S] in the molten steel , the inclusions in the slab, the variable slab surface shell thickness ,unreasonable mold taper and straighten temperature. Some ways to control the surface cracks in the continuous cast slab were proposed.
|
Received: 03 April 2009
|
|
|
|
[1] |
WEN Xin1,REN Ying1,ZHANG Lifeng2. Cleanliness of GCr15 bearing steel refined by RH and VD vacuum processes[J]. JOURNAL OF IRON AND STEEL RESEARCH , 2022, 34(7): 613-621. |
[2] |
ZHAO Xianjiu1,2,ZHANG Jieyu2,3,LI Chuanjun2,3. Analysis of formation mechanism about Ca-Mg-Al spineltype inclusions in cold thin rolling sheet[J]. JOURNAL OF IRON AND STEEL RESEARCH , 2022, 34(7): 664-671. |
[3] |
YANG Jian, LI Ting-ting. Research progress on inclusion control of non-oriented silicon steel with REM treatment[J]. Iron and Steel, 2022, 57(7): 1-15. |
[4] |
DU Yi-nuo, GUO Lei, YANG Yang, ZHANG Shuai, YU Han-zhang, GUO Zhan-cheng. Numerical simulation of inclusions floating behavior under supergravity field in liquid steel[J]. Iron and Steel, 2022, 57(7): 54-62. |
[5] |
GUO Shuai, ZHU Hang-yu, ZHOU Jie, DONG Shuai, LIANG Yin. Effects of inclusions on stress field in low-density steel under compressive loading[J]. Iron and Steel, 2022, 57(7): 63-72. |
[6] |
LI Jipeng1,2, WANG Liang1, CHENG Shusen1, LIU Zhao1, CHEN Haoyu1, LIU Yong1. Thermodynamic study on calcium treatment of “liquid phase window” and inclusions modification[J]. JOURNAL OF IRON AND STEEL RESEARCH , 2022, 34(6): 523-533. |
|
|
|
|