|
|
|
| Development and Application of the Tool for Optimizing Continuous Casting Process Parameters at Baosteel |
| ZHANG Qun-liang1,GUO Zhao-hui1,XU Guo-dong2 |
1. Research Institute,Baoshan Iron and Steel Co.,Ltd.,Shanghai 201900,China
2. Steelmaking Plant of Baoshan Iron and Steel Co.,Ltd.,Shanghai 201900
China |
|
|
|
|
Abstract For the process parameter optimization problem of continuous casting production, an assistant optimization tool is developed based on the cooling solidification mathematical model. By using empirical production parameters as the basis and constraints for the optimization computation, not only the accuracy of calculation but also the application effect is improved. The tool has been applied to optimize process parameters of casting machines at Baosteel, and the results showed that short-term optimization process, low experiment cost and low on-line risks could be achieved.
|
|
Received: 27 April 2011
Published: 18 November 2011
|
|
|
|
| [1] |
Fan Qian, Hua-long Li, Wen-gang Yang, Hai-rong Guo, Guo-qi Liu, Hong-xia Li, Bei-yue Ma. Corrosion resistance of BN–ZrO2 ceramics with different additives by molten steel[J]. JOURNAL OF IRON AND STEEL RESEARCH,INTERNATIONAL, 2022, 29(7): 1101-1109. |
| [2] |
MENG Huadong，YANG Yong，YAO Tonglu，HE Qing，LIN Tengchang，LI Longfei. Experiment on dephosphorization process of “remaining slagdouble slag” in combined blown converter[J]. JOURNAL OF IRON AND STEEL RESEARCH , 2022, 34(7): 622-628. |
| [3] |
ZHANG Xiang，XIE Qinghua，NI Peiyuan，LI Ying. Flow behavior of molten steel in SEN during fullnozzle selfswirling flow continuous casting[J]. JOURNAL OF IRON AND STEEL RESEARCH , 2022, 34(7): 629-638. |
| [4] |
ZHAO Xianjiu1,2，ZHANG Jieyu2,3，LI Chuanjun2,3. Analysis of formation mechanism about Ca-Mg-Al spineltype inclusions in cold thin rolling sheet[J]. JOURNAL OF IRON AND STEEL RESEARCH , 2022, 34(7): 664-671. |
| [5] |
SHANG Ting-rui, WANG Wei-ling, KANG Ji-bai, ZHU Miao-yong, LUO Sen. In situ observation of solidification under transient and average cooling rate of 20CrMnTi continuous casting[J]. Iron and Steel, 2022, 57(7): 73-85. |
| [6] |
CHEN Bin, LI Hai-bo, JI Chen-xi, LIU Guo-liang, ZHOU Hai-chen. Influence of casting parameters on level fluctuations and its industrial application[J]. Iron and Steel, 2022, 57(7): 86-94. |
|
|
|
|
2011, Vol. 30 
