|
|
Optimization method of design of roller arrangement for vertical-curved slab caster |
YANG Chang-lin |
Department of Metallurgical Equipment, China National Heavy Machinery Research Institute Co., Ltd., Xi′an 710032, Shaanxi, China |
|
|
Abstract For the conventional vertical-curved slab caster, the design of roller arrangement and the relationship among the radius of curved zone, the length of bending zone, the length of straitening zone and the height of caster are introduced. The optimization method of designing roller arrangement parameters is proposed, and the stress of the caster before and after optimization is briefly analyzed. Results indicate that, for the vertical-curved slab caster, when the length of caster and the height of vertical zone are given, the radius of curved zone and the length of bending zone could be determined by the height of caster. The straightening length of the casting machine can be calculated according to the height of the casting machine, the radius of curved zone, and the length of bending zone. The optimized results obtained by computer program indicate that bulging force and the withdrawal resistance for moving strand could be decreased by decreasing the radius of curved zone and increasing the length of straitening zone.
|
Received: 04 August 2020
Published: 23 February 2021
|
|
|
|
[1] |
杨拉道,黄进春,李淑贤,等. 直弧形板坯连铸设备[M]. 北京:冶金工业出版社,2017.
|
[2] |
杨拉道,雷华,曾晶,等. 直弧形连铸机辊列设计中基本概念的最新阐述[J]. 重型机械, 2006(2): 4.
|
[3] |
李万国, 冉莲玉,汤锴. 板坯连铸机辊列及相关设备设计应考虑的若干事项[J]. 连铸, 2015(6): 45.
|
[4] |
韩培培,任廷志. 坯壳鼓肚对铸机矫直区内铸坯变形的影响[J]. 钢铁,2016,51(4): 24.
|
[5] |
沈轶奇,谭希华,徐荣军. 浅述宝钢3号厚板坯连铸机改造[J]. 连铸,2019(3): 68.
|
[6] |
张国胜,李政. 昆钢9号板坯连铸机辊列外弧曲线调整[J]. 连铸,2016(4): 4.
|
[7] |
刘彩玲,杨超武,曾晶. 新型的板坯连铸机辊列布置[J]. 重型机械,2018(1): 23.
|
[8] |
邹冰梅. 连铸多点弯曲多点矫直与连续弯曲连续矫直辊列设计计算[J]. 钢铁技术, 2006(2): 12.
|
[9] |
盛义平,孙蓟泉,董少华. 板坯连铸机辊列的最优设计[J]. 东北重型机械学院学报,1997,21(1): 8.
|
[10] |
王叶婷. 直弧形板坯连铸机辊列系列优化[J]. 机械研究与应用, 2008, 21(4): 78.
|
[11] |
王先勇,董新秀,刘彭涛. 板坯连铸机辊列计算机辅助设计[J]. 连铸,2013(5): 29.
|
[12] |
肖海江,谭希华,靳瑞祥. 直弧形板坯连铸机辊列设计计算[J]. 机械工程师,2011(9): 158.
|
[13] |
马春武. 板坯连铸机的辊列设计计算与分析[J].连铸,2014(3): 18.
|
[14] |
郭龙,张兴中,冯常喜. 钢高温蠕变特性对连铸坯矫直变形的影响[J]. 钢铁,2017, 52(2): 38.
|
[15] |
黄文,张卓然,张兴中,等. 连铸机多点矫直的矫直辊反力的解析计算法[J].特种铸造机有色金属,2015,35(11): 1139.
|
[1] |
Fan Qian, Hua-long Li, Wen-gang Yang, Hai-rong Guo, Guo-qi Liu, Hong-xia Li, Bei-yue Ma. Corrosion resistance of BN–ZrO2 ceramics with different additives by molten steel[J]. JOURNAL OF IRON AND STEEL RESEARCH,INTERNATIONAL, 2022, 29(7): 1101-1109. |
[2] |
ZHANG Xiang,XIE Qinghua,NI Peiyuan,LI Ying. Flow behavior of molten steel in SEN during fullnozzle selfswirling flow continuous casting[J]. JOURNAL OF IRON AND STEEL RESEARCH , 2022, 34(7): 629-638. |
[3] |
ZHAO Xianjiu1,2,ZHANG Jieyu2,3,LI Chuanjun2,3. Analysis of formation mechanism about Ca-Mg-Al spineltype inclusions in cold thin rolling sheet[J]. JOURNAL OF IRON AND STEEL RESEARCH , 2022, 34(7): 664-671. |
[4] |
SHANG Ting-rui, WANG Wei-ling, KANG Ji-bai, ZHU Miao-yong, LUO Sen. In situ observation of solidification under transient and average cooling rate of 20CrMnTi continuous casting[J]. Iron and Steel, 2022, 57(7): 73-85. |
[5] |
CHEN Bin, LI Hai-bo, JI Chen-xi, LIU Guo-liang, ZHOU Hai-chen. Influence of casting parameters on level fluctuations and its industrial application[J]. Iron and Steel, 2022, 57(7): 86-94. |
[6] |
KANG Yong-lin, ZHU Guo-ming, JIANG Min, WANG Guo-lian, LIU Peng-tao, XU Hai-wei, XIE Cui-hong, WEI Yun-fei, SHEN Kai-zhao, LIU Yang. Slab continuous casting by big roll heavy reduction and extra thick plate rolled by low compression ratio[J]. Iron and Steel, 2022, 57(7): 95-105. |
|
|
|
|