|
|
Analysis of forming reasons of typical defects in 16MnDR extra-thick steel plate |
YUAN Jing1, SHI Peng-zhao2, SHUAI Yong3, LIAO Sang-sang1, XU Li-jun2, QIU Sheng-tao2 |
1. Technology Center, Xinyu Iron and Steel Group Co., Ltd., Xinyu 338001, Jiangxi, China; 2. National Engineering Research Center for Continuous Casting Technology, Center Iron and Steel Research Institute, Beijing 100081, China; 3. No.1 Steelmaking Plant, Xinyu Iron and Steel Group Co., Ltd., Xinyu 338001, Jiangxi, China |
|
|
Abstract In order to study and discuss the formation mechanism of typical defects of steel plate and provide theoretical reference for the stability control of steel plate quality, the causes of typical defects such as surface crack, unqualified center flaw detection and unqualified impact performance of extra thick steel plate were studied by means of metallographic microscope and scanning electron microscope. The results show that there are two causes for surface cracks of steel plate, one is the hot embrittlement caused by high harmful elements in steel, the other is the continuous casting billet crack caused by high inclusions and spread during rolling. The reason for the unqualified inspection of steel plate is the large Nb, Ti and V carbonitride precipitated from the steel plate core, accompanied by large MgO and Al2O3 inclusions. The main reasons for the poor impact performance are the banded structure of the rolled plate, the upper martensite/austenitic structure containing carbon in the banded structure, the coarse grain and mixed grain.
|
Received: 10 October 2020
|
|
|
|
[1] |
周子业. 16MnDR厚钢板焊接裂纹的分析与处理[J]. 金属加工:热加工, 2012 (6):63.
|
[2] |
高照海, 唐郑磊, 许少普,等. 80~100 mm厚正火低温压力容器钢16MnDR的开发[J]. 钢铁研究, 2015,43(2):23.
|
[3] |
李婧. 高强度特厚钢板生产工艺研究与应用[D]. 沈阳:东北大学, 2010.
|
[4] |
赵罗根. 热轧船板表面裂纹的成因分析[J]. 宽厚板, 2011(3):13.
|
[5] |
孙立根, 刘云松, 周景一,等. 45钢热轧宽厚板表面裂纹成因分析[J]. 热加工工艺, 2020,49(1):156.
|
[6] |
张锦兴, 孔明姣, 任树洋,等. 塑料模具钢SM50钢板表面裂纹成因及控制措施[J]. 中国冶金, 2019, 29(4):70.
|
[7] |
黄雁, 王东兴, 陈永峰,等. 高强度螺纹钢铸坯表面裂纹原因分析及控制[J]. 连铸, 2020(1):46.
|
[8] |
吕安明. 12Cr1MoV轧材表面裂纹原因分析及探讨[J]. 连铸, 2018(2):79.
|
[9] |
刘庆波. Q345B中厚板探伤不合原因分析及控制措施[J]. 连铸, 2015(5):15.
|
[10] |
周佩. 15MnNbR钢板探伤不合格原因分析[J]. 中国冶金, 2006, 16(2):22.
|
[11] |
杨小刚, 张立峰, 张瑞,等. 中厚钢板探伤不合格原因分析[J]. 炼钢, 2013, 29(6):48.
|
[12] |
袁少威, 许少普, 王新, 等. 70~100 mm厚低合金钢板探伤不合原因分析及控制[J]. 轧钢, 2015, 32(4):80.
|
[1] |
WEN Xin1,REN Ying1,ZHANG Lifeng2. Cleanliness of GCr15 bearing steel refined by RH and VD vacuum processes[J]. JOURNAL OF IRON AND STEEL RESEARCH , 2022, 34(7): 613-621. |
[2] |
ZHAO Xianjiu1,2,ZHANG Jieyu2,3,LI Chuanjun2,3. Analysis of formation mechanism about Ca-Mg-Al spineltype inclusions in cold thin rolling sheet[J]. JOURNAL OF IRON AND STEEL RESEARCH , 2022, 34(7): 664-671. |
[3] |
YANG Jian, LI Ting-ting. Research progress on inclusion control of non-oriented silicon steel with REM treatment[J]. Iron and Steel, 2022, 57(7): 1-15. |
[4] |
DU Yi-nuo, GUO Lei, YANG Yang, ZHANG Shuai, YU Han-zhang, GUO Zhan-cheng. Numerical simulation of inclusions floating behavior under supergravity field in liquid steel[J]. Iron and Steel, 2022, 57(7): 54-62. |
[5] |
GUO Shuai, ZHU Hang-yu, ZHOU Jie, DONG Shuai, LIANG Yin. Effects of inclusions on stress field in low-density steel under compressive loading[J]. Iron and Steel, 2022, 57(7): 63-72. |
[6] |
CHEN Guang-xing, XU Xiao-chang. Microstuctures and aging impact properties of 15CrMoR steel[J]. Iron and Steel, 2022, 57(7): 146-153. |
|
|
|
|