|
|
Mathematical simulation of impact zone volume on flow in inductively heated tundish |
XIONG Qiao-ling1, AI Xin-gang1, WANG Qiong2, DU Bing1, LIU Hai-xiao1, NING Zhe1 |
1. School of Materials and Metallurgy, Liaoning University of Science and Technology, Anshan 114151, Liaoning,China; 2. Technical Quality Department, Anshan Hefeng Refractory Material limited Liability Company, Anshan 114225, Liaoning,China |
|
|
Abstract Channel type induction heating tundish can compensate the heat of molten steel in time and effectively, which is conducive to improving the quality of slab. A mathematical model of induction heating tundish with five streams and four channels is established to study the influence of the volume of impact zone on the flow of molten steel in tundish. The results show that when the volume of impact zone accounts for 45% of the front chamber, the problems of bimodal flow and short circuit flow are effectively solved, the water distribution among the streams is more reasonable, and the flow performance of molten steel in tundish is better. The results show that the total residence time of tundish reaches 1 020 s, and the dead zone volume reduces to 11.5%. The time for the three nozzles to reach the peak is consistent, the maximum time difference is 49 s, and the average time to reach the peak is 335 s.
|
Received: 09 June 2021
|
|
|
|
[1] |
刘涛,赵梦静,杨树峰,等.中间包等离子加热工业试验[J].中国冶金,2020,30(10):3.
|
[2] |
Sheng D Y, Jönsson Pär G. Effect of thermal buoyancy on fluid flow and residence-time distribution in a single-strand tundish[J]. Materials, 2021, 14(8):1906.
|
[3] |
高章光. 通道式感应加热中间包内钢液的流场及温度场模拟[D].重庆:重庆大学,2017.
|
[4] |
YUE Y F, XU Q M, GUO P, et al. Constant temperature control of tundish induction heating power supply for metallurgical manufacturing[J]. Frontiers in Energy, 2019, 13(1):26.
|
[5] |
马钰,唐海燕,张硕,等. 通道式感应加热五流中间包流场的水力学模拟[J]. 钢铁,2020,55(11):64.
|
[6] |
窦为学,姚海英,常立山,等. 通道式感应加热中间包流场物理模拟研究[J]. 连铸,2019(3):33.
|
[7] |
张硕,唐海燕,刘锦文,等.六流H型通道感应加热中间包的结构优化[J].钢铁研究学报,2019,31(9):794.
|
[8] |
Kollbreg S, Sundberg Y.Heating apparatus for intermediate ladles or tundishes [P].United States: US4735256. 2008-04-05.
|
[9] |
徐靖驰,蹇华,聂高升,等.感应加热技术在连铸中间包上的应用[J].冶金设备,2018(6):57.
|
[10] |
陈希青,肖红,王璞,等.双通道感应加热中间包的三维磁流热耦合模型[J].钢铁,2021,56(6):48.
|
[11] |
邢飞,郑淑国,朱苗勇. 通道倾角对感应加热中间包影响的数值模拟[J]. 炼钢,2019,35(3):33.
|
[12] |
肖红,徐辉,何浩,等.基于数值模拟的五流感应加热中间包流场优化[J].中国冶金,2021,31(1):19.
|
[13] |
李洋,程常桂,张丰,等. 连铸板坯中间包内控流装置优化的水模型研究[J]. 铸造技术,2017,38(5):1079.
|
[14] |
Mishra R, Mazumdar D. Numerical analysis of turbulence inhibitor toward inclusion separation efficiency in tundish[J]. Transactions of the Indian Institute of Metals, 2019,72(4):898.
|
[15] |
林海波.八流一体式中间包流动和传热特性的研究[J]. 铸造技术,2015,36(2):428.
|
[1] |
Bei-yue Ma, Xin-ming Ren, Zhi Gao, Fan Qian, Zhao-yang Liu, Guo-qi Liu, Jing-kun Yu, Gao-feng Fu. Influence of pre-synthesized Al2O3–SiC composite powder from clay on properties of low-carbon MgO–C refractories[J]. JOURNAL OF IRON AND STEEL RESEARCH,INTERNATIONAL, 2022, 29(7): 1080-1088. |
[2] |
ZHAO Peng1,2,ZHANG Hua1,2,FANG Qing1,2,WANG Jiahui1,2, WU Guoliang1,2,NI Hongwei1,2. Numerical study on strandblocking operation of a sixstrand square billet tundish [J]. JOURNAL OF IRON AND STEEL RESEARCH , 2022, 34(5): 438-450. |
[3] |
GAO Jiang, LIU Qing, LI Quan-hui, SUN Jian-kun, TAO Biao, ZHANG Jiang-shan. Effect of wall design on fluid flow inside a four-strand T-type tundish[J]. CONTINUOUS CASTING, 2022, 41(3): 11-17. |
[4] |
YIN Pan, YUAN Ji-bai, LI Xiu-jie, ZHAO Hong-liang. Effects of different forms of turbulence inhibitor on tundish metallurgical[J]. CONTINUOUS CASTING, 2022, 41(3): 25-31. |
[5] |
WANG Zhi-zheng, ZHONG Peng, WANG Huan. Optimization of tundish system for double-flow slab caster[J]. CONTINUOUS CASTING, 2022, 41(3): 65-70. |
[6] |
DAI Meng-bo, LUO Bang-cao, SUN Cai-hong, TIAN Hao, SUN Ye-chang, CHUN Tie-jun. Optimized development of steel slag tailings-GGBS based low-cost backfill material[J]. Iron and Steel, 2022, 57(2): 175-184. |
|
|
|
|