|
|
Physical modeling on unsteady flow behavior of molten steel in single strand tundish |
WANG De-yong1, QUAN Qi1, QU Tian-peng1, ZHOU Xing-zhi1, LI Xiang-long1, CHEN Gang2 |
1. Shagang School of Iron and Steel, Soochow University, Jiangsu 215137,Suzhou,China; 2. Steel Making Department, Zhangjiagang Pohang Stainless Steel Co.,Ltd., Zhangjiagang 215625, Jiangsu,China |
|
|
Abstract Aiming at the problem that the unsteady changing process significantly deteriorates the cleanliness of molten steel, a physical model with a scale ratio of 1∶2 was established to investigate the unsteady flow behavior of molten steel in a single strand tundish based on the similarity principle.The results show that the flow state of the fluid in tundish can be effectively improved by setting reasonable size dam and weir and turbulence controller under steady state condition. In the unsteady condition, when the ladle change is over and the tundish liquid level rises, the average residence time of liquid steel increases with the increase of liquid level, up to 497 s.The dead volume fraction decreases gradually with the liquid level rising, and the minimum value is 23.91%. During the whole ladle change process, the liquid level decreases and rises with the drastic fluctuation of the flow state, which eventually deteriorates the removal behavior of non-metallic inclusions in molten steel.
|
Received: 02 July 2021
|
|
|
|
[1] |
郑淑国,朱苗勇. 多流连铸中间包内钢液流动特性的分析模型[J]. 金属学报, 2005,41 (10): 67.
|
[2] |
杨树峰,吴金强,李京社,等. 四流中间包控流装置优化物理模拟[J]. 中国冶金, 2019, 29(4): 81.
|
[3] |
李茂旺,李怡宏,董超. 流钢孔对中间包流体行为影响的数值模拟[J]. 中国冶金, 2020, 30(6): 55.
|
[4] |
LING H, ZHANG L, LI H. Mathematical modeling on the growth and removal of non-metallic inclusions in the molten steel in a two-strand continuous casting tundish[J]. Metallurgical and Materials Transactions B, 2016, 47(5): 2991.
|
[5] |
SHENG D Y. Mathematical modelling of multiphase flow and inclusion behavior in a single-strand tundish[J]. Metals, 2020, 10(9): 1213.
|
[6] |
ZHANG B, LIU F, ZHU R, et al. Effects of multiple-hole baffle arrangements on flow fields in a five-strand asymmetric tundish[J]. Materials, 2020, 13(22): 5129.
|
[7] |
罗荣华. 五流大方坯中间包流场优化及换包非稳态流体行为的模拟研究[D]. 武汉:武汉科技大学, 2012.
|
[8] |
张晓萌,李少翔,唐海燕,等. 非对称中间包稳态浇铸与换包操作的冶金效果[J]. 钢铁研究学报, 2019, 31(1): 15.
|
[9] |
陈志平. 非稳态浇注条件下连铸板坯质量控制研究[D]. 沈阳:东北大学, 2008.
|
[10] |
彭小辉,李玉刚,李俊桥,等.连铸中间包内流场与夹杂物运动的数值模拟[J].连铸,2011(增刊1):417.
|
[11] |
郑瑞轩,赵立华,姚骋,等. 四流中间包流场影响因素分析与优化[J]. 炼钢, 2021, 37(1): 63.
|
[12] |
张硕,唐海燕,刘锦文,等. 六流H型通道感应加热中间包的结构优化[J]. 钢铁研究学报, 2019, 31(9): 787.
|
[13] |
Tripathi A. Numerical investigation of electro-magnetic flow control phenomenon in a tundish[J]. ISIJ International, 2012, 52(3): 447.
|
[14] |
李艳峰.IF钢非稳态浇注铸坯洁净度分析[J].河南冶金,2019,27(2):16.
|
[15] |
张晓萌,李少翔,唐海燕,等.非对称中间包稳态浇铸与换包操作的冶金效果[J].钢铁研究学报,2019,31(1):15.
|
[16] |
Takahashi K, Ando M, Ishii T. Numerical investigation of unsteady molten steel flow and Inclusion behavior in the tundish in the ladle change period[J]. ISIJ International, 2014, 54(02).
|
[17] |
储成阳,徐宇,武鸿杰,等.五流中间包稳态及非稳态实验[J]. 连铸, 2020 (5): 7.
|
[1] |
ZHAO Peng1,2,ZHANG Hua1,2,FANG Qing1,2,WANG Jiahui1,2, WU Guoliang1,2,NI Hongwei1,2. Numerical study on strandblocking operation of a sixstrand square billet tundish [J]. JOURNAL OF IRON AND STEEL RESEARCH , 2022, 34(5): 438-450. |
[2] |
LIU Yan-bin, TANG Hai-yan, WANG Kai-min, MA Yu, SHANG Guang-hao, ZHANG Li-ping, ZHANG Jia-quan. Effect of submerged entry nozzle structures on liquid surface flow behavior of slab continuous casting mold[J]. CONTINUOUS CASTING, 2022, 41(3): 1-10. |
[3] |
GAO Jiang, LIU Qing, LI Quan-hui, SUN Jian-kun, TAO Biao, ZHANG Jiang-shan. Effect of wall design on fluid flow inside a four-strand T-type tundish[J]. CONTINUOUS CASTING, 2022, 41(3): 11-17. |
[4] |
YIN Pan, YUAN Ji-bai, LI Xiu-jie, ZHAO Hong-liang. Effects of different forms of turbulence inhibitor on tundish metallurgical[J]. CONTINUOUS CASTING, 2022, 41(3): 25-31. |
[5] |
WANG Zhi-zheng, ZHONG Peng, WANG Huan. Optimization of tundish system for double-flow slab caster[J]. CONTINUOUS CASTING, 2022, 41(3): 65-70. |
[6] |
QUAN Qi, ZHANG Zhi-xiao, LI Xiang-long, QU Tian-peng, CHEN Gang, CHOU Hong-ye. Mathematical modeling of inclusion removal behavior in stainless steel tundish[J]. CONTINUOUS CASTING, 2022, 41(2): 10-19. |
|
|
|
|