|
|
Thermodynamic analysis of decarburization and chromium preservation of stainless steel in oxygen blowing process of VOD |
FANG Yan-hong1,2, YANG Chen-xi1,2, WANG Cheng-rui1,2, LIANG Guang-fen1,2, LI Yan-dong3, DUAN Hua-mei1,2 |
1. College of Material Science and Engineering, Chongqing University, Chongqing 400044, China; 2. Chongqing Key Laboratory of Vanadium-Titanium Metallurgy and New Materials, Chongqing 400044, China; 3. College of Material Science and Engineering, Yangtze Normal University, Chongqing 408100,China |
|
|
Abstract In order to ensure high decarburization and high recovery rate of chromium in the VOD oxygen blowing stage, the influence of oxygen supply, temperature and vacuum degree on the carbon and chromium content of ZG06Cr13Ni4Mo stainless steel during the oxygen blowing process of VOD were calculated by FactSage8.1. And orthogonal experiments were carried out to determine the order and optimal value of oxygen supply, temperature and vacuum degree on decarburization and chromium preservation. These results show that the oxygen supply in the oxygen blowing stage should be controlled within the range of 4.68-6.10 m3/t (normal). The temperature of blowing oxygen should be set within 1 585-1 600 ℃ and the temperature of stopping blowing oxygen should not exceed 1 750 ℃. The pressure ought to be controlled within 5-9 kPa. Based on the orthogonal experiment, the results indicate that the factor of oxygen supply has the greatest impact and followed by vacuum, then temperature. The optimized conditions are oxygen supply of 4.9 m3/t (normal), temperature of 1 600 ℃, and pressure of 7 kPa, respectively. Under this condition, the carbon mass fraction and chromium mass fraction are 0.027% and 12.201%, respectively.
|
Received: 17 July 2021
|
|
|
|
[1] |
赵宝泉. 采用EAF+LF-VOD精炼炉冶炼超低碳不锈钢生产大型铸件的研究[C]//第二届中国环渤海经济区铸造论坛文集. 沈阳:北京铸锻行业协会,2010.
|
[2] |
林振邺. 热轧高强H型钢高应变低周疲劳性能研究[D]. 重庆:重庆大学, 2011.
|
[3] |
程刚良. 生物医学纯钛ECAP的力学性能及表面活性研究[D]. 南京:南京航空航天大学, 2014.
|
[4] |
杨东. 回火工艺对13Cr4NiMo低碳马氏体不锈钢低温冲击韧性的影响[D]. 南宁:广西大学, 2020.
|
[5] |
王唯, 李俊国, 王亚军, 等. 老化AOD不锈钢渣性质及其淋溶特性[J].中国冶金, 2021, 31(8): 104.
|
[6] |
张金鑫,李宏,张炯明,等. MTA废气分析在VOD脱碳过程中的应用[J].中国冶金, 2018, 28(9): 23.
|
[7] |
Fritz E.不锈钢生产技术的发展趋势[J].钢铁,2003,38(5):67.
|
[8] |
王鑫潮, 游志敏, 成国光,等. VOD炉冶炼20Cr13不锈钢硅脱氧工艺[J].钢铁, 2014, 49(8):31.
|
[9] |
WEI J, YI L I. Mathematical modeling of VOD refining process of stainless steel under conditions of combined top and bottom blowing-mathematical model of the process[J].Journal of Taiyuan University of Technology,2014,45(1):1.
|
[10] |
徐迎铁,陈兆平,李实.VOD冶炼超纯铁素体不锈钢脱碳脱氮[J].工程科学学报,2014(增刊1):36.
|
[11] |
刘剑辉, 朱荣, 李士琦,等. VOD冶炼超低碳马氏体不锈钢[J].北京科技大学学报, 2009(增刊1):190.
|
[12] |
彭凡, 唐钟雪, 张生存,等. VOD冶炼工艺在马氏体不锈钢ZG06Cr13Ni4Mo上的应用[J].铸造技术, 2010,31(6):695.
|
[13] |
裴芬, 吴龙, 李士琦,等. VOD冶炼不锈钢工艺模型的研究[J].特殊钢, 2010, 31(5):5.
|
[14] |
WU Y J, JIANG Z H, LIANG L K, et al. Calculation of some related thermodynamic problems in stainless steel refining process (III)-Decarburation, chromium conservation and degassing of liquid Iron containing chromium[J].Journal of Iron and Steel Research, 2003,15(5):1.
|
[15] |
Healy G W, Hilty D C. Oxygen blowing rate in stainless steel melting[J].JOM,1956,8(3):325.
|
[16] |
Bale C W, Bélisle E, Chartrand P, et al. FactSage thermochemical software and databases, 2010—2016[J].Calphad, 2016,54:35.
|
[17] |
王林珠, 李翔, 刘录凯, 等. 镍基高温合金中非金属夹杂物成分和特征控制[J].中国冶金, 2021, 31(5): 32.
|
[18] |
林腾昌, 门兵, 程雄, 等. 热处理对铸态钢中硫化锰夹杂物的影响[J].中国冶金, 2021, 31(4): 48.
|
[19] |
宜亚丽, 韩晓铠, 张磊,等. 316L/EH40不锈钢复合板热轧过程中晶粒组织的均匀性[J].钢铁, 2020,55(1):47.
|
[20] |
易金权, 曾凯, 邢保英,等. SPCC冷轧钢胶焊连接工艺研究及数值模拟[J].钢铁, 2019,54(7):93.
|
[21] |
杨乐彪, 李家新, 杨佳龙,等. 铁矿含碳球团高温抗压强度研究及机理分析[J].钢铁, 2017,52(10):13.
|
[22] |
万羽. VOD炉冶炼Cr不锈吹氧脱碳浅析[J].特钢技术, 2011,17(4):38.
|
[23] |
马腾霄, 金杨. 超低碳不锈钢冶炼技术研究[J].大型铸锻件, 2015(5):28.
|
[24] |
陈爽, 杨光印, 郭江,等. 中频炉和VOD双联法冶炼不锈钢工艺[J].铸造技术, 2012,33(6):705.
|
[25] |
邹勇. VOD冶炼超纯铁素体不锈钢脱碳工艺的研究[J].炼钢, 2011,27(1):54.
|
[26] |
赵沛. 炉外精炼及铁水预处理实用技术手册[M]. 北京:冶金工业出版社, 2004.
|
[27] |
王宁,王建新,宋崎,等.正交设计多指标综合评分法优化救心速释片处方[J].中成药, 2003,25(3):7.
|
[28] |
Abu-Izza K A, Garcia-Contreras L, Lu D R. Preparation and evaluation of sustained release AZT-Loaded microspheres: Optimization of the release characteristics using response surface methodology[J].Journal of Pharmaceutical Sciences, 1996, 85(2):144.
|
[1] |
WANG Ye-guang, LIU Cheng-jun, QIU Ji-yu. Effect of Al content on non-metallic inclusions in heat-resistant steel containing rare earth element[J]. Iron and Steel, 2022, 57(4): 52-57. |
[2] |
BAO Daohua,HUANG Yu,CHENG Guoguang,QIAO Tong,DAI Weixing. Effect of Ce content on precipitation behavior of rare earth inclusions in H13 steel[J]. JOURNAL OF IRON AND STEEL RESEARCH , 2021, 33(8): 792-800. |
[3] |
Shao-ying Li, Bin Li, Xing-ming Zhao, Xiao-jun Xi, Sheng-chao Duan, Jing Guo, Han-jie Guo. Evaluating oxygen level of Si-deoxidized H13 die steel using ferrous oxide-containing slags at 1873 K[J]. JOURNAL OF IRON AND STEEL RESEARCH,INTERNATIONAL, 2021, 28(8): 978-989. |
[4] |
SUN Ye1,2,YANG Wensheng1,2,GUO Hanjie1,2,GUO Jing1,2,DUAN Shengchao1,2. Thermodynamic study on precipitation of MX and M23C6 in MarBN steel[J]. JOURNAL OF IRON AND STEEL RESEARCH , 2021, 33(7): 619-626. |
[5] |
LIU Zhiyuan,LUO Zhiguo,GU Yingjie,ZOU Zongshu. Numerical simulation of effect of swirling ladle shroud on collision and coalescence of inclusions[J]. JOURNAL OF IRON AND STEEL RESEARCH , 2021, 33(5): 408-417. |
[6] |
WANG Lin-zhu, LI Xiang, ZHAO Yu-dong, YANG Shu-feng, LI Jun-qi, CHEN Chao-yi. Effect of order of deoxidant addition on Al-Ti composite inclusions[J]. Iron and Steel, 2021, 56(11): 63-71. |
|
|
|
|