|
|
Application of large size steel bar in engineering and its production technology transformation |
YAN Zhi1, SHU Xing-zhong2, LIU Ze-feng1, LI Bin1, JISHA Ri-fu2, LUO Zhi-wen3 |
1. Yangtze Three Gorges Equipment and Materials Co., Ltd., China Yangtze Three Gorges Group Co., Ltd., Chengdu 615421,Sichuan, China; 2. China Three Gorges (construction) Group Co., Ltd., China Three Gorges Group Co., Ltd., Chengdu 615421, Sichuan,China; 3. Yunnan Yuxi Yukun Iron and Steel Group Co., Ltd., Yuxi 653100, Yunnan, China |
|
|
Abstract Large sized hot-rolled ribbed steel bars are widely used in important structures and parts of various large and medium-sized hydropower stations and large scale infrastructure projects. Although the basic performance of large-sized building steel bars on the market meets the national standards, when they are used in large-scale projects, especially in large-scale hydropower stations, bridges and caverns, the problems such as torsion and roundness of longitudinal ribs lead to the problems of steel bar processing, reinforcement quality and so on it is difficult to bind and weld, which increases the labor cost and causes a lot of steel bar waste. This paper focuses on the problems existing in the actual use of large-scale steel bars, and how to tackle key problems and innovate the steel rolling production process, so as to produce products that fully meet the needs of large-scale projects, reduce waste and cost.
|
Received: 12 July 2021
|
|
|
|
[1] |
冯弥,石东浪,李小勇.钢筋直螺纹连接端头精准批量切割设备系统的研发与应用[J].施工技术,2016,45(10):52.
|
[2] |
邵云.自动钢筋弯弧机设计研究[J].内燃机与配件,2019(11):188.
|
[3] |
佚名. 白鹤滩水电站标准化钢筋加工厂建成投产[J].四川水力发电, 2017(36):179.
|
[4] |
白林平, 周宁宁, 王海荣,等. 一种可快速调节钢材弯曲度的弯弧机:中国, CN207188545U[P]. 2018-04-06.
|
[5] |
郭其江.螺纹钢纵肋扭转形成原因分析与改进[J].现代制造技术与装备,2020(5):142.
|
[6] |
蒙世东, 吴经理, 杨霖. 螺纹钢筋纵肋扭曲形成原因分析与改进[J].水钢科技, 2014(3):6.
|
[7] |
张光伟. 热轧带肋钢筋分体式纵肋导向辊:中国, CN2645810Y[P]. 2004-10-06.
|
[8] |
来煜, 孔建益, 刘怀广,等. 基于机器视觉的螺纹钢表面尺寸检测方法[J].制造业自动化, 2015(8):56.
|
[9] |
李健.试论螺纹钢的生产工艺流程[J].冶金管理,2021(1):1.
|
[10] |
乔晓峰,李春辉,王芳.高强度螺纹钢筋生产工艺的研究[J].中国金属通报,2018(7):116.
|
[11] |
赵东伟.螺纹钢负差控制水平提升[J].河北冶金,2020(6):63.
|
[12] |
冯向工. 螺纹钢工艺系统技术攻关与质量提升[J].冶金信息导刊, 2020(2):50.
|
[13] |
刘士杰.棒材倍尺飞剪剪切稳定性改进措施[J].装备制造技术,2020(12):161.
|
[14] |
宋廷, 钱江. 可调齿轮侧隙的倍尺飞剪:中国, CN110788390A[P]. 2020-07-21.
|
[15] |
蔡仁吉, 房金乐, 黄晶. 一种倍尺飞剪信号处理方法:中国, CN110666236A[P]. 2020-01-10.
|
[16] |
董伟明, 李瑞.冷剪机刀座锁紧装置改进[J].一重技术,2021(4):3.
|
[17] |
冯圣才. 1 300 t冷剪存在的问题及改进措施[J].冶金管理,2021(19):79.
|
|
|
|