|
|
Application of robot automatic mould fluxes adding technology in Ningbo Iron and Steel Works |
LIU Chang-wei1, ZOU Zhuo-ming2 |
1. Continuous Casting Operation Area of Steelmaking Plant,Ningbo Iron and Steel Co., Ltd.,Ningbo 315807,Zhejiang, China; 2. Robot Division,Ramon Science and Technology Co.,Ltd.,Changsha 410000,Hunan,China |
|
|
Abstract The principle of adding mold flux is to add less and frequently, however traditional manually way is hard to meet this requirement. In order to achieve the goal of adding flux less and frequently, uniformly and controllable, Ningbo Iron and Steel Co., Ltd has developed the robot automatic mold flux feeding system through cooperation with professional manufacturers, which has been put into mass production practice, and carried out by various research methods such as experimental method and quantitative analysis method for more than one year. The practice results show that the robot automatic flux adding technology can meet the principle of adding less and frequently. After the application of this technology, the probability of flux slagging can be significantly reduced, and the goal of adding flux uniformly and continuously can be achieved, which is conducive to reducing the risks of bonding, longitudinal cracks and so on.
|
Received: 11 February 2022
|
|
|
|
[1] |
何忠治.电工钢[M].北京:冶金工业出版社,1996.
|
[2] |
王谦,何生平,李玉刚,等.中国连铸保护渣技术现状和发展需求[J].连铸,2014(5):1.
|
[3] |
陈黎明.沙钢全面实施智能化发展战略——未来五年将要采用1 000~1 500个机器人[J].世界金属导报,2016-11-01(A05).
|
[4] |
袁方明,王新华,刘秀梅,等. IF钢连铸板坯表面夹渣缺陷的研究[J]. 连铸,2004(6):32.
|
[5] |
艾新港,韩东,李胜利,等. 外加液态保护渣连铸生产实践与前景展望[J].钢铁,2019,54(8):132.
|
[6] |
编者按.机器人自动加渣系统研发及产业化[J].自动化博览,2018(12):68.
|
[7] |
周俊,徐海宁,钱志友.基于自适应控制的连铸自动加保护渣机器人系统[J].南钢科技与管理,2018(4):36.
|
[8] |
陈晓明.宁钢新型加渣机器人投入使用[J].铸造工程,2020,44(1):42.
|
[9] |
蔡常青,王龙飞.自动加渣机器人在板坯连铸中的应用[J].福建冶金,2019(2):12.
|
[10] |
郑直,刘天佑.自动加渣机器人的运动学分析与轨迹规划研究[J].机电信息,2013(21):109.
|
[11] |
佚名.全球首创!宝钢机器人的“群魔乱舞”[J]千家网-工业机器人,18-07-13:
|
[12] |
霍相锋.自动加渣机器人在宽板坯连铸机上的应用[J].数码设计(下),2021:(4).
|
[13] |
程传良,周俊.新型加渣机器人在第一炼钢厂的应用[J].南钢科技与管理,2019:(1).
|
[14] |
杨龙胜,陆洪周,倪涛,等.工业机器人在连铸系统中的应用[J].机电信息,2013,(9):58.
|
[15] |
佚名.兴澄特钢连铸自动加保护渣机器人系统通过验收[EB/OL].(2019-05-10)http://www.jssm.org.cn/default.php?mod=article&do=detail&tid=974233.
|
[16] |
赵雷,于海岐,龙山,等.宽厚板坯连铸自动加渣机的应用实践.鞍钢技术,2014,(3):47.
|
[17] |
朱立光,袁志鹏,肖鹏程.高拉速薄板坯连铸中碳钢保护渣开发与应用[J].连铸,2020,(1):51.
|
[18] |
刘克,韩毅华,杨帆.MgO对CaO-Al2O3基四元系保护渣熔渣微结构的影响[J].钢铁,2020,(5):52.
|
[19] |
梁静召,田鹏,吴雨晨.板坯连铸保护渣分钢种应用技术[J].连铸,2020(5):21.
|
[20] |
马骏鹏,李欢.保护渣对430不锈钢铸坯表面质量的影响[J].连铸,2020(4):29.
|
[1] |
Fan Qian, Hua-long Li, Wen-gang Yang, Hai-rong Guo, Guo-qi Liu, Hong-xia Li, Bei-yue Ma. Corrosion resistance of BN–ZrO2 ceramics with different additives by molten steel[J]. JOURNAL OF IRON AND STEEL RESEARCH,INTERNATIONAL, 2022, 29(7): 1101-1109. |
[2] |
ZHANG Xiang,XIE Qinghua,NI Peiyuan,LI Ying. Flow behavior of molten steel in SEN during fullnozzle selfswirling flow continuous casting[J]. JOURNAL OF IRON AND STEEL RESEARCH , 2022, 34(7): 629-638. |
[3] |
ZHAO Xianjiu1,2,ZHANG Jieyu2,3,LI Chuanjun2,3. Analysis of formation mechanism about Ca-Mg-Al spineltype inclusions in cold thin rolling sheet[J]. JOURNAL OF IRON AND STEEL RESEARCH , 2022, 34(7): 664-671. |
[4] |
SHANG Ting-rui, WANG Wei-ling, KANG Ji-bai, ZHU Miao-yong, LUO Sen. In situ observation of solidification under transient and average cooling rate of 20CrMnTi continuous casting[J]. Iron and Steel, 2022, 57(7): 73-85. |
[5] |
CHEN Bin, LI Hai-bo, JI Chen-xi, LIU Guo-liang, ZHOU Hai-chen. Influence of casting parameters on level fluctuations and its industrial application[J]. Iron and Steel, 2022, 57(7): 86-94. |
[6] |
KANG Yong-lin, ZHU Guo-ming, JIANG Min, WANG Guo-lian, LIU Peng-tao, XU Hai-wei, XIE Cui-hong, WEI Yun-fei, SHEN Kai-zhao, LIU Yang. Slab continuous casting by big roll heavy reduction and extra thick plate rolled by low compression ratio[J]. Iron and Steel, 2022, 57(7): 95-105. |
|
|
|
|