|
|
|
| Simulation on the flow field and inclusions in slab con-cast tundish |
| LIAN Tianlong, HE Bo, WANG Wenxue, HOU Kaikai |
| Department of Metallurgical Equipment, China National Heavy Machinery Research Institute Co., Ltd., Xi'an 710018,Shaanxi,China |
|
|
|
|
Abstract As an intermediate step in con-cast production, the tundish enables the pouring of molten steel to shift from intermittent to continuous operation, and its role as a metallurgical reaction vessel is crucial in improving steel production capacity and quality. Multiple optimization schemes for the shape of the tundish in a case study are proposed. Then through the simulation calculation, the law of inclusion removal rate, RTD curve data, velocity field and temperature field under different schemes is studied, the advantages and disadvantages of the proposed schemes are evaluated, and the best improvement scheme is proposed. Finally, some of the technical measures proposed can provide references and guidance for steel production companies to improve product quality.
|
|
Received: 25 July 2023
|
|
|
|
| [1] |
包燕平,王敏.中间包冶金学[M].北京:冶金工业出版社,2019.
|
| [2] |
包燕平,王敏.中间包冶金技术发展趋势[J].连铸,2021(5):2.
|
| [3] |
曾立,罗衍昭,刘延强,等.汽车板中大尺寸钙铝酸盐类夹杂来源及控制工艺[J].钢铁,2023,58(10):67.
|
| [4] |
刘泓. 铝脱氧钢中卷渣类大颗粒夹杂物研究[D].北京:北京科技大学,2023.
|
| [5] |
SUN M,JIANG Z H,LI Y, et al. Laboratory study on the formation of endogenous CaO‐containing inclusion in gear steel SCr420H during the simulated LF refining process without Ca treatment[J]. Steel Research International,2022,93(10):1611.
|
| [6] |
李键,卢金霖,罗志国,等.中间包气幕挡墙去除夹杂物的数值模拟[J].炼钢,2023,39(3):52.
|
| [7] |
陈宏亮,刘珍童,周秋月,等.中间包内钢液流动和二次氧化的数值模拟[J].中国冶金,2023,33(7):40.
|
| [8] |
李中华,田伟,吴飞鹏,等.中间包结构对钢液流动及夹杂物去除的数值模拟研究[J].炼钢,2023,39(2):42.
|
| [9] |
赵占山,王诗,任涛,等.多流中间包流场模拟研究及优化[J].连铸,2022(5):23.
|
| [10] |
陈阳,张炯明.板坯连铸中间包内夹杂物去除的数值模拟[J].钢铁研究,2014,42(1):22.
|
| [11] |
全齐,张志霄,李向龙,等.不锈钢连铸中间包内夹杂物去除行为数值模拟[J].连铸,2022(2):10.
|
| [12] |
梁震江,郑万,王君驰,等.过滤控流中间包流场及夹杂物去除的数值模拟[J].连铸,2021(5):88.
|
| [13] |
王伟. 新型旋流式中间包的数值模拟[D].内蒙古科技大学,2022.
|
| [14] |
艾立群,赵定国,马海涛,等.中间包钢液中夹杂物去除的物理模拟研究[J].连铸,2017(1):8.
|
| [15] |
左小坦,赵立,张亚兵,等.气幕挡墙对中间包流场和夹杂物去除的影响[J].连铸,2023(1):24.
|
| [16] |
王举,李阳,姜周华,等.AISI 431不锈钢生产过程夹杂物转变机理[J].钢铁,2023,58(7):54.
|
| [17] |
翟俊,王伟,郎炜昀.304系不锈钢冶金过程硬质夹杂物形成机理分析[J].钢铁,2023,58(4):39.
|
| [18] |
任英. 304不锈钢中夹杂物的控制[D].北京:北京科技大学,2017.
|
| [19] |
常茜萱. 控流器对两流中间包流场影响的模拟研究[D].武汉:武汉科技大学,2022.
|
| [20] |
方芳,高长益,赵兴君,等.70钢连铸坯中非金属夹杂物的来源及控制[J].物理测试,2012,30(3):15.
|
| [21] |
张英男,李文博,王志利,等.中间包夹杂物去除效果研究[J].冶金管理,2020(19):39.
|
| [22] |
黄军,张永杰,王宝峰,等.连铸中间包长水口位置对流场和夹杂物去除率的影响[J].特种铸造及有色合金,2016,36(2):133.
|
| [23] |
朱苗勇.洁净钢生产的中间包技术[M].北京:冶金工业出版社,2009.
|
| [1] |
TIAN Xu, ZHOU Heng, HUANG Jian, CAI Haoyu, KOU Mingyin, WU Shengli. Numerical study of effect of φ(CO)∶φ(H2) on reaction process in a direct reduction shaft furnace[J]. Iron and Steel, 2024, 59(1): 34-40. |
| [2] |
BAI Chenchen, SHI Xuefeng, WANG Mingyang, YU Hao, HU Changqing, HAN Tao. Numerical simulation analysis of direct reduction of gas-based shaft furnace[J]. Iron and Steel, 2024, 59(1): 41-48. |
| [3] |
WANG Shisong, WANG Yunbo, TANG Qing, ZHANG Xubin, HE Shengping. Control of temperature of high-Ti steel on top surface and "floater" formation[J]. Iron and Steel, 2024, 59(1): 58-66. |
| [4] |
LI Yu1，SUN Yanhui1，SONG Sicheng1，WANG Chao2. Effect of submerged entry nozzle on molten steel flow in thin slab mold[J]. JOURNAL OF IRON AND STEEL RESEARCH , 2024, 36(1): 66-75. |
| [5] |
CHENG Ting, YANG Li, QIU Hao, LI Tong, LIU Heping, MENG Huadong. Review and development of numerical simulation for gas stirring in EAF steelmaking[J]. CONTINUOUS CASTING, 2024, 43(1): 1-8. |
| [6] |
LU Jingzhou, PAN Weiming, DOU Kun, WANG Wanlin, ZHOU Lejun. Numerical simulation of mold nozzle optimization in slab continuous casting process[J]. CONTINUOUS CASTING, 2024, 43(1): 18-25. |
|
|
|
|
2024, Vol. 43 
