Abstract��The relationship among the recrystal grain microstructure, grain boundary angles distributions, grain size and mechanical properties of experimental ferritic stainless steel of cold rolling were studied. Two kinds of annealing technologies that hold temperature for different were adopted to make the annealing samples successful. Firstly the wire-electrode cutting was used to cut the samples into pieces, then ground and polished, finally it was made to become metallographic phase sample. The samples were investigated by metallographic microscope and electron back-scatter diffraction (EBSD). The results show that the two kinds of ferritic stainless sheets are different in the recrystal grain microstructure, grain boundary angles distributions and grain size; it leads to the difference in mechanical properties between two kinds of annealing technology of sheets. Furthermore, the degree of recrystalization of the two kinds of ferritic stainless sheets was analyzed utilizing EBSD.
���࣬��Ӧ�䣬��־��. 00Cr12Ti�����岻��ֵ����ṹEBSD�о�[J]. �й������ڿ���, 2012, 30(6): 9-12.
LUO Qing,ZHOU Ying-qi,LONG Zhi-min. Investigated on EBSD of Microstructure in 00Cr12Ti Ferritic Stainless Steel. Chinese Journal of Iron and Steel, 2012, 30(6): 9-12.
2012, Vol. 30 
