Analysis on typical shell defect on the surface of hot-rolled pipeline steel X80
WANG Lin1��YU Yang1��WANG Chang1��CHEN Jin2��JIAO Hui-li2
1. Sheet Metal Research Institute,Shougang Research Institute of Technology, Beijing 100043, China 2. Shougang Qian��an Iron & Steel Company,Shougang Group, Qian��an 064404, China
Abstract��Shell is one of the common surface defects in hot-rolled pipeline steel X80, which have complicated causes and different morphology. Based on the practical production of a steel factory, three kinds of typical shell defects in hot-rolled pipeline steel X80 were summarized. The causes and corresponding morphology of each type of shell defect was analyzed, and preventive measures were proposed, which was helpful to understanding and distinguishing different shell defects and provided guide to production.
�ո�����: 2014-06-09
��������: 2015-05-18
ͨѶ����:
����
E-mail: cdwanglin2006@163.com
����:
�� �֣��� ���� ������ 誣�������. ����X80���߸ֱ��������Ƥȱ�ݷ���[J]. �й������ڿ���, 2015, 33(3): 34-39.
WANG Lin��YU Yang��WANG Chang��CHEN Jin��JIAO Hui-li. Analysis on typical shell defect on the surface of hot-rolled pipeline steel X80. Chinese Journal of Iron and Steel, 2015, 33(3): 34-39.