Analysis of surface cracks of the weld seamless stainless steel pipe
WANG Chang1��YU Zhi-chuan2��SU Cheng-long2��ZHANG Shu-lan1��SONG Zhi-gang1
��1.Central Lab�� Iron and Steel Research Institute�� Beijing 100081�� China 2. Jiangyou Changcheng Special Steel Co.�� Ltd.�� Pangang Group�� Jiangyou 621701�� China��
Abstract��Combined with the analysis of mechanical properties�� chemical composition�� corrosion properties�� cracks expanding morphology at the weld joint�� optical microstructure ��OM���� oxides morphologies and microstructure chemical composition�� the surface cracks found around the 06Cr18Ni11Ti seamless stainless steel pipe weld joint were systematically studied. It was found that the 06Cr18Ni11Ti pipes had qualified chemical composition and excellent properties. The distance between the crack and the heat affected zone outside border was about 2 mm. The cracks around the weld seamless pipes weld joint were typical fold defects�� which were caused by the surface impurities formed during pipes hot working and were not related to the weld processing. Meanwhile�� the improvement suggestion was proposed.
�ո�����: 2017-08-15
��������: 2018-06-13
����:
�� ������־�����ճ���������������־��. �첻��ֹܱ������Ʒ���[J]. , 2018, 36(3): 24-30.
WANG Chang��YU Zhi-chuan��SU Cheng-long��ZHANG Shu-lan��SONG Zhi-gang. Analysis of surface cracks of the weld seamless stainless steel pipe. , 2018, 36(3): 24-30.
Francesco I., Vittorio D. C., Laura D. A. Analysis of the intergranular corrosion susceptibility in stainless steel by means of potentiostatic reactivation tests[J]. Procedia Structural Integrity,2017,3: 269-275
[2]
Jiao J. P., Sun J. J., Li G. H., Wu B, He C. F.Evaluation of the intergranular corrosion in austenitic stainless steel using collinear wave mixing method[J].NDT & E International, 2015, 69: 1-8
Navid M., Norizah R., Norhayati A., Tang N. H.Effect of Current on Characteristic for 316 Stainless Steel Welded Joint Including Microstructure and Mechanical Properties[J]. Procedia CIRP, 2015, 26: 560-564
[10]
Xu G. J, Kutsuna M., Liu Z.J., Yamada K,.Comparison between diode laser and TIG cladding of Co-based alloys on the SUS403 stainless steel[J]. Surface and Coatings Technology, 2006,201: 1138-1144
[11]
Hao K. D, Zhang C, Zeng X.Y, Gao M.Effect of heat input on weld microstructure and toughness of laser-arc hybrid welding of martensiticstainless steel[J]. Journal of Materials Processing Technology, 2017, 245: 7-14
2018, Vol. 36 
