Failure analysis of copper pole clamp in power industry
WANG Ruo-min 1， CHEN Guo-hong 1， FANG Zhen-bang 1， TENG Yue 1，WANG Xing-han 2， FENG Zhi-hua 3
1. Electric Power Research Institute， State Grid Anhui Electric Power Co.，Ltd.， Hefei 230601， China； 2. State Grid Yantai Power Supply Company， Yantai 264000， China； 3. State Grid Bozhou Power Supply Company， Bozhou 236800， China
Abstract：Aiming at several recent cases of typical copper pole clamp failures in Anhui power grid， combining with the type of clamp to analyze the causes of failure and put forward the focus of metal supervision in the future. The result showed that the frequent cracking of the copper pole clamp was mainly related to its alloy composition and forming process. For brass clamp， it is mainly to strengthen the detection of alloy composition， and on-site conductivity and hardness testing could be supplied. For red copper brass clamp， it is mainly to strengthen the strength check and the appearance inspection of forming quality. At the same time， pay attention to the review of the tightening torque during the installation stage.
2020, Vol. 38 
