|
|
|
| Study on the effect of alloy component on mechanical performance of High Manganese |
| DU Lei |
| |
|
|
|
|
Abstract The means of regression analysis was used in this paper. The effect of Mn,Al,Fe,Ni on mechanical performance of ZCuAl8Mn14Fe3Ni2 was discussed. Better obdurability can be obtained when Al equivalent is 10.2%��10.6%. Al is 7.8%��8.3%.Mn is 13.7%��14.3%.Fe is 3.0%��3.6%. Ni is 2.0%��2.5%.
|
|
Received: 18 May 2010
|
|
Corresponding Authors:
DU Lei
|
|
|
|
| [1] |
WANG Yong-qiang,SUN Li,LI Na,LIN Su-hua,YANG Bin. Kinetics of �� phase precipitation in a Fe20Cr9Ni cast austenite stainless steel[J]. Chinese Journal of Iron and Steel, 2016, 28(7): 67-73. |
| [2] |
CHEN Peng- ju,,ZHU Cheng- yi,,,ZHANG Zhi- cheng,LI Guang- qiang,,PAN Ming- xu. Thermodynamic evaluation of desulfurization ability of GCr15 bearing steels during LF refining process[J]. Chinese Journal of Iron and Steel, 2016, 28(5): 30-35. |
| [3] |
YI Shun��TAO Yong��RUAN Fang��WU Run�� LIU Jing. Ti and N segregation and size calculation of TiN inclusions in cord steel during solidification[J]. Chinese Journal of Iron and Steel, 2016, 51(4): 70-73. |
| [4] |
ZHENG Kai,WANG Zhen,ZHONG Zhen-qian,WANG Yan-li,LI Shi-lei. Mechanical Behavior of Long-Term Thermal Aged Nuclear Power Plant��s Primary Circuit Pipes[J]. Chinese Journal of Iron and Steel, 2014, 26(7): 1-7. |
| [5] |
WANG Fei-xue,DU Feng-shan,YU Hui,SUN Jing-na. Spread Rule During PQF Seamless Tube Rolling Process Based on FEM[J]. Chinese Journal of Iron and Steel, 2013, 48(3): 51-55. |
| [6] |
ZHANG Tian-ming1,AN Yong-tai1,SONG Xu-ding1,FU Han-guang2. Influence of Magnetic Flux on Microstructure and Properties of High Carbon High Speed Steel Made by Centrifugal Casting[J]. Chinese Journal of Iron and Steel, 2012, 24(05): 35-40. |
|
|
|
|
2010, Vol. 28 
