|
|
|
| Composites Hot-Mold Temperature and Pressure Group Control System Based on Wireless and 485 |
| |
| |
|
|
|
|
Abstract This thesis discussed the composites hot-mold temperature and pressure group control system based on STC microcontroller and multi-temperature monitor. To achieve the group control of the multi-signals, we use the 485 bus to collect pressure data and the wireless module to transmit the pressure and temperature data. We use simulation of serial technology to expand the STC serial port. To reduce the multi-point data acquisition cycle, we use transit stations to achieve the parallel data collection. The parameters control of the blade production process is strengthened by the application of this system.
|
|
Received: 21 June 2010
|
|
|
|
| [1] |
MAO Jun��ZHANG Yu��MENG Hui��CHEN Hong-yue. Dynamic characteristics analysis of rolling mill secondary transmission system with clearances[J]. Chinese Journal of Iron and Steel, 2015, 50(10): 45-53. |
| [2] |
SHI Zhen-xue,LIU Shi-zhong,HAN Mei,LI Jia-rong. Influence of Mould Temperature on Solidification Microstructure of Single Crystal Superalloy Blade[J]. Chinese Journal of Iron and Steel, 2014, 26(9): 48-52. |
| [3] |
FAN Xing-chen, LI Song-shan, WANG Hai-jun, LIU Zhuo-song, SUN Bo, JIA Guang-shun. Secondary Cooling Fan Damper Structure Improvement for the Thick Slab Caster[J]. Chinese Journal of Iron and Steel, 2014, 1(6): 32-34. |
| [4] |
GH Alloy Blade ForgingsZHANG Li-xin,SUN Qi,YU Pai,TIAN Ye. Unqualification Reason of Yield Strength for High Grade[J]. Chinese Journal of Iron and Steel, 2013, 31(4): 49-52. |
| [5] |
WANG Pei-wei,ZHENG Da-yong. Processing of Mould Parts in Wax Pattern for Inside Profile of Precision Multiple Continuous Casting Blade[J]. Chinese Journal of Iron and Steel, 2013, 25(04): 20-24. |
| [6] |
LIU Xin-quan1,YANG Gang2,YANG Mu-xin2. Precipitation Behavior of M23C6 and MX Second Phase in 1Cr11Co3W3MoVNbNB Ferrite-Blade-Steel at 620�� Aging Treatment[J]. Chinese Journal of Iron and Steel, 2012, 24(05): 53-57. |
|
|
|
|
2010, Vol. 28 
