|
|
Casting Powder of Medium Carbon Steel Containing Borbon |
PENG Qi-chun,TANG Meng-long,LI Gang,LI Hui,TONG Zhi-bo |
Key Laboratory for Ferrous Metallurgy and Resources Utilization of Ministry of Education, Wuhan University of Science and Technology, Wuhan 430081, Hubei, China |
|
|
Abstract Aimed at the problem of corner crack of medium carbon steel containing boron, by analyzing the boron content in concretion fluid slag blanket of casting powder, it was found that, when the boron content in steel is 0.0013%, the percentage composition of B2O3 in slag is 0.74%, and the viscosity of original slag specimen and fluid slag specimen is 0.122Pa��s and 0.12Pa��s (1300��), respectively. The content of borbon in steel has little influence on the performance of casting powder, and it is needless to design special casting powder for boron steel. The performance of original medium carbon casting powder has been optimized: R increases from 1.23 to 1.27, viscosity decreases from 0.165 Pa��s to 0.123Pa��s (1300��), melting speed increases from 22kg/h to 27kg/h�� fusion point increases from 1085�� to 1155��, and the corner crack of casting blank is obviously well controlled.
|
Received: 14 August 2012
Published: 24 February 2014
|
|
|
|
[1] |
LI Jian-min������JIANG Mao-fa��. Effect of mold fluxes on slab surface crack for 20Mn23AlV[J]. Chinese Journal of Iron and Steel, 2017, 52(9): 48-53. |
[2] |
LONG Xiao,HE Sheng-ping,WANG Qian. Factors influencing roughness of solidified mold flux film for peritectic steel continuous casting[J]. Chinese Journal of Iron and Steel, 2017, 29(7): 551-555. |
[3] |
LONG Xiao��HE Sheng-ping��WANG Qian. Experiment on solidification and composition segregation of solidified mold flux film for peritectic steel continuous casting[J]. Chinese Journal of Iron and Steel, 2017, 52(5): 43-46. |
[4] |
LUO Yan-zhao��JI Chen-xi��DENG Xiao-xuan��PAN Hong-wei��ZENG Zhi��CUI Yang. Optimization of mold flux to improve surface quality of ultra-low carbon IF steel[J]. Chinese Journal of Iron and Steel, 2017, 52(4): 38-43. |
[5] |
HUANG Ting��WEN Guang��hua��BAI Bin��wen��TANG Ping��GAO Jin��xing. Leaching mechanisms of ions from mold flux and its effect on water quality[J]. Chinese Journal of Iron and Steel, 2017, 29(3): 191-194. |
[6] |
MA Xiao-mei. Cause analysis of the abnormal failure of the 82B wire rod[J]. Chinese Journal of Iron and Steel, 2017, 35(3): 45-48. |
|
|
|
|