|
|
Several Issues Discussion on the Revision of Remained Heat Treatment Ribbed Bars Standard |
LU Dan�� HUANG Fei�� PENG Wen-xiang�� ZHANG Xiao-li |
Physical Analysis Department, National Center for Quality Supervision and Test of Steel Material Products, Maanshan 234000, Anhui, China |
|
|
Abstract The characteristics of remained heat treatment ribbed bars was discussed by chemical test, microstructure analysis, rib peeling strength test and Vickers hardness test. Several recommendations were given for the standard revision��further relaxing the chemical composition of Si and Mn content requirements; clearing the requirements of uniformity on hardened layer thickness; giving limit requirements on hardened layer to enhance the yield strength.
|
Received: 30 May 2013
Published: 12 December 2014
|
Corresponding Authors:
Dan LU
E-mail: ludan518@sina.com
|
|
|
|
[1] |
QING Jia-sheng��SHEN Hou-fa��LIU Ming. V-N microalloying of high strength weathering steel YQ450NQR1[J]. Chinese Journal of Iron and Steel, 2017, 52(5): 87-93. |
[2] |
WU Wei. Comparison analysis of new and old national standards for metallic materials tensile test at elevated temperature[J]. Chinese Journal of Iron and Steel, 2017, 35(2): 53-58. |
[3] |
YANG Cai-fu��CHEN Xue-hui��WANG Rui-zhen. Quality assessment and suggestion of standard revision for high strength rebars in China[J]. Chinese Journal of Iron and Steel, 2017, 52(10): 94-103. |
[4] |
WU An-min������ZHANG Yan-ming������LI Ying����. Comparison between new and old versions of the national standards for metal tensile creep and stress rupture tests[J]. Chinese Journal of Iron and Steel, 2017, 35(1): 54-58. |
[5] |
XU Wei-cheng��ZHANG Hua��LUO Dan-xia. Analysis of stress rate of tensile test method at room temperature in GB/T 228.1-2010[J]. Chinese Journal of Iron and Steel, 2016, 34(6): 56-58. |
[6] |
WU Si-wei��ZHOU Xiao-guang��CAO Guang-ming��SHI Nai-an��LIU Zhen-yu��WANG Guo-dong. Hot rolling C-Mn steel industry big data preprocessing for improvements on the model[J]. Chinese Journal of Iron and Steel, 2016, 51(5): 88-94. |
|
|
|
|