|
|
Analysis of internal inclusion in automobile gear steel bar |
LIU Xiao-bin1��AN Jie2��LIU Gui-jiang2��WANG Zhe2�� LI Tao2 |
��1. Enterprise Management Office�� Fushun Special Steel Co.�� Ltd.�� Fushun 113001�� China 2. Chief Engineer Office�� Fushun Special Steel Co.�� Ltd.�� Fushun 113001�� China�� |
|
|
Abstract Internal inclusion was one of the commonly detected defects in Fushun Special Steel Co.�� Ltd. The internal inclusion was analyzed by detected positional sampling�� acid leaching�� microscope and scanning electron microscope. 20Cr and 20CrMnTi belonged to low carbon aluminum deoxidation steel. And the internal inclusion was the oxide inclusion�� which chemical composition was mainly Al-Mg-Ca-O. The cause was that the inclusion was not removed after the reaction of refining deoxidation product Al2O3 and liquid steel. Thus�� the internal inclusion could be improved by modifying the composition of refining slag.
|
Received: 19 March 2018
Published: 26 December 2018
|
|
|
|
[1] |
����,����ȫ,�����,����,����.�������ı���ȱ�ݷ���[J].����,2016,41(4):64.
|
[2] |
����,����ȫ,�����,����.�������ı���ӹ�ȱ�ݵIJ���������[J].����,2017,34(3):88.
|
[3] |
���,������,����,��Ʒ.��и־����д��ͼ�������Դ��ʾ���о�[C]//��ʮ���й���������ߵ����챦��ѧ��������ļ�.�Ϻ�:2015.
|
[4] |
���,������,��Ʒ,����.��и־����д��ͼ�������Դ��ʾ��[J].����,2017,52(9):34.
|
[5] |
�����,����,����.�������ָ�8620RH�м�������о�[J].�����о�,2017,45(5):18.
|
|
|
|