|
|
|
| Properties of rotating bending fatigue of 55Cr3 spring steel for automotive stabilizer bars at room temperature |
| YIN De-fu，WANG Kai-zhong，GONG Meng-qiang，ZHANG Xiao-rui |
|
|
|
|
Abstract Inorder to meet the demand of the practical application of automobile stabilizer bar steel，the rotating bending fatigue properties of 55Cr3 spring steel were tested at roomtemperature with axial strain control method，strain cycle ratio was －1 and frequency was 83 Hz，the S-N curves of the sample were obtained. Property of rotating bending fatigue of 55Cr3 spring steel was investigated by observing the fatigue fracture with scanning electron microscope（SEM）. The results showed that the 55Cr3 spring steel for automotive stabilizer bars had high purityand good combination of strength andplasticity，and the rotating bending fatigue limit was up to 730MPa. Under high stress，the crack originated from defects such as machining marks and scratches on the surface of the sample，and there were many crack sources.
|
|
Received: 17 December 2018
Published: 15 August 2019
|
|
|
|
| [1] |
ZHANG Hongliang，FENG Guanghong，CUI Huaizhou. Analysis of crack defects in Q420B angle steel #br#
during hot rolling process[J]. Iron and Steel, 2019, 54(9): 73-78. |
| [2] |
LAN Peng,HAN Gengwei,LI Liang,WANG Pu,. Formation and control of midway crack in LDCC #br# Q235B steel slab with high casting speed[J]. Iron and Steel, 2019, 54(8): 144-153. |
| [3] |
DENG Aijun,PU Xuefeng,ZUO Xiaotan,FAN Dingdong,ZHENG Anmin. Study and optimization of Vnotch cracking in Hbeam[J]. Iron and Steel, 2019, 54(8): 161-167. |
| [4] |
GUO Junli，WEN Guanghua，FU Jiaojiao，TANG Ping，GU Shaopeng. Evaluation of carbon equivalent calculation of continue#br#
casting steel based on surface roughness[J]. Iron and Steel, 2019, 54(8): 187-193. |
| [5] |
LIN Huan, YANG Maosheng, SHU Baipo, LI Jianxin, LUO Zhiqiang. High temperature rotating bending fatigue behavior and damage mechanism of high nitrogen stainless bearing steel[J]. JOURNAL OF IRON AND STEEL RESEARCH , 2019, 31(5): 475-484. |
| [6] |
SHEN Bin-bin. Discussion about the thermoplasticity of vanadium microalloyed steel[J]. PHYSICS EXAMINATION AND TESTING, 2019, 37(5): 9-11. |
|
|
|
|
2019, Vol. 37 
