|
|
Discussion about on-line pickling technology of medium plate of special metal and alloy |
WANG Guo-fu 1, YU Hai-feng 2 |
1. Plate Branch,Baosteel Specail Metals Co.,Ltd.,Shanghai 200940,China; 2. Research Institute,Baoshan Iron and Steel Co.,Ltd.,Shanghai 201900,China |
|
|
Abstract Pickling is the bottleneck of manufacturing process for high-quality medium plates of titanium and titanium alloy. The on-line pickling is difficult for duplex stainless steel plates, which is a challenge at home and abroad. TA2 titanium, 304 stainless steel and S32205 duplex stainless steel plates were selected as the representative products to study the pickling process in the horizontal continuous spray pickling line. The mixture of nitric acid and hydrofluoric acid (composed of four elements including H, N, O and F) was proposed and discussed. Two-step mixed acid (HNO3+HF) pickling technology was investigated which included: the conception of two-step mixed acid (HNO3+HF) pickling technology; the numeric range of mass concentration of substance of two-step mixed acid (HNO3+HF); the table about the amount of substance of two-step mixed acid (HNO3+HF). Based on this technology, the on-line pickling of medium plates of special metal and alloy with wide product range was realized, including TA2 titanium, 304 stainless steel and S32205 duplex stainless steel. The surface of plate after pickling was silvery white with uniform color, which could meet the requirements of standard and user concerning surface quality of products.
|
Received: 20 May 2019
Published: 15 February 2020
|
|
|
|
[1] |
MA Xiao-cong, AN Zi-jun, CHEN Lei, MEI Rui-xue, HAO Shuo, PENG Cheng. Influence of loading direction on tensile properties of a TRIP-assisted duplex stainless steel sheet[J]. Iron and Steel, 2020, 55(2): 112-118. |
[2] |
YANG Ji-chun, WANG Jun, REN Lei, FU Xiao-yang, LIU Xiang-jun, ZHANG Ze-ning. Effect of Ce on microstructure and impact propertiesof S32550 duplex stainless steel[J]. Iron and Steel, 2020, 55(1): 86-92. |
[3] |
GAO Xiangming1,PEI Mingde1,2,LI Guoping1,2. Influence of cold rolling on precipitation of S32750 super duplex stainless steel[J]. Iron and Steel, 2019, 54(9): 94-98. |
[4] |
CUI Jin-xing1, HAN Shi-chao2, SUN Jian-liang1, PENG Yan1. Evolution characteristics of residual stresses in medium-thick plate during thinning process[J]. Iron and Steel, 2019, 54(5): 39-46. |
[5] |
CHEN Xingrun, CHENG Guoguang, HUI Kai, PAN Jixiang, LI Jingyu. Formation mechanism of inclusions in 2205 duplex stainless steel during continuous casting[J]. JOURNAL OF IRON AND STEEL RESEARCH , 2019, 31(5): 452-459. |
[6] |
LI Xiao-ming, WANG Jian-li, Lü Ming, YIN Wei-dong, CUI Ya-ru, ZHAO Jun-xue. Experiment on stainless steel pickling sludge used as steelmaking slagging flux[J]. Iron and Steel, 2019, 54(3): 96-101. |
|
|
|
|