[1]Itatani M, Ogawa T, Saito T, Narazaki C, Ogawa K.Fracture assessment for butt welded plate of Ni-based alloy [C]..Proceedings of the ASME 2010 Pressure Vessels & Piping Division / K-PVP Conference, Bellevue, Washington, USA,, July 18-22, 2010., PVP2010-25645.:- [2]Castelluccio GM, Cravero S, Bravo R, Ernst H.Mismatch effect on fracture driving force in mismatched girth welded pipes [C]..Proceedings of the ASME 2011 Pressure Vessels & Piping Division Conference, Baltimore, Maryland, USA,, July 17-21, 2011. ., PVP2011-58044:- [3]Ogawa T, Itatani M, Saito T, Hayashi T, Narazak C, Tsuchihashi K.Fracture assessment for a dissimilar metal weld of low alloy steel and Ni-base alloy [J].[J].International Journal of Pressure Vessels and Piping,, 2012, 90-91:61-68 [4]Castelluccio GM, Ipina JEP, Yawny AA, Ernst HA.Fracture testing of the heat affected zone from welded steel pipes using an in situ stage [J]. [J].[J].Engineering Fracture Mechanics, ., 2013, 98:52-63 [5]Lei Y, Tao J, Li PN.Limit load and J estimates of a centre cracked plate with an asymmetric crack in a mismatched weld [J].[J].International Journal of Pressure Vessels and Piping,, 1999, 76:747-757 [6]Kim YJ, Schwalbe KH, Ainsworth RA.Simplified J-estimations based on the Engineering Treatment Model for homogeneous and mismatched structures [J].[J].Engineering Fracture Mechanics,, 2001, 68:9-27 [7]Ling K, Wang ZD, Xuan FZ.Finite element analysis of HAZ effects on limit loads for mismatched welded joints [C]..Proceedings of 2012 International Symposium on Structural Integrity,, October 31-November4, 2012,., : 83-86 [8]Masanori Kikuchi, Yoshitaka Wada, Yuto Shimizu, Yulong Li.Crack growth analysis in a weld-heat-affected zone using S-version FEM [J].[J].International Journal of Pressure Vessels and Piping, ., 2012, 90-91:2-8 [9]Schwalbe KH, Kim YJ, Hao S, Cornec A, Kocak M.EFAM, ETM-MM96: the ETM method for assessing the significance of crack-like defects in joints with mechanical heterogeneity (strength mismatch) [S]..GKSS Report,, 1997, , 97/E/9.:- [10]Karlsson and Sorenson.ABAQUS User`s Manual ersion 5.7 [J].Hibbit, Pawtucket, RI, 1998., :- [11]Guo Q, Chen Q.Study of 16MnR failure assessment curve[J].Journal of Jilin Institute of Chemical Technology, 1993, 10(2):33-41 [12]Beijing, Machinery Publishing House.Welding notebook [J].[M]., 1995., :- [13]Kim YJ, Schwalbe K-H.Mismatch effect plastic yield loads in idealized weldments, II. Heat affected zone cracks [J].[J].Engineering Fracture Mechanics, 2001, 68:183-199 [14]Zhang M, Ding F, Xu DS, Cheng ZH.An engineering method of fracture criteria for welded joints[J].Transactions of the China Welding Institution, 2004, 25(1):8-12