为研究中间包覆盖剂成分对连铸生产过程中泡沫渣的有效控制和清除,以及对中间包耐材侵蚀和使用寿命的影响,对比不同类型中间包覆盖剂的性能,优化中间包覆盖剂的使用方式,提高中间包包衬的耐材寿命。采用现场试验方法,对3种不同类型覆盖剂使用后产生的冲击区渣进行化学成分对比,分析其对中间包耐材侵蚀和使用寿命的影响。同时,通过实验室静态坩埚渣系入侵试验,改进渣线部位镁质干式料,优化中间包冲击区结构,寻找覆盖剂的最佳使用方式来提高中间包包衬耐材寿命。结果表明,环保型覆盖剂复合使用与其它类型的中间包覆盖剂相比,具有最优性能;环保型覆盖剂复合使用,能快速消除冲击区泡沫渣;环保型覆盖剂复合使用能显著提升钢水质量,并降低浇铸过程中的热损失,还能降低中间包包衬的耐材侵蚀程度,从而延长中间包的使用寿命,实现降本增效的目的。
Abstract
In order to investigate the effective control and removal of slag in the continuous casting production process and the influence of the tundish covering agent composition on the erosion and service life of tundish refractories, this study compares the performance of different types of tundish covering agents, optimizes the usage of tundish covering agents, and improves the service life of tundish lining refractories. In this research, field experiments were conducted to compare the chemical composition of the impact zone slag produced after using three different types of covering agents, and analyze their effects on the erosion and service life of tundish refractories. Meanwhile, static crucible slag infiltration tests were performed in the laboratory to improve the magnesia dry mix at the slag line, optimize the impact zone structure of the tundish, and find the best application method for the covering agent to enhance the service life of the tundish lining refractory. The research results show that: The eco-friendly covering agent used in combination has the best performance compared to other types of tundish covering agents. The combined use of eco-friendly covering agents can quickly eliminate the foam slag in the impact zone. The combined use of eco-friendly covering agents can significantly improve the quality of molten steel and reduce heat loss during the casting process; it can also reduce the erosion degree of the tundish lining refractory, thereby prolonging the service life of the tundish and achieving the goal of cost reduction and efficiency enhancement.
关键词
侵蚀 /
中间包 /
覆盖剂 /
耐火材料 /
使用寿命
{{custom_keyword}} /
Key words
erosion /
tundish /
covering agent /
refractory materials /
service life
{{custom_keyword}} /
{{custom_sec.title}}
{{custom_sec.title}}
{{custom_sec.content}}
参考文献
[1] 高青青,李明晖,李赛赛,等.中间包碱性覆盖剂的研究现状与展望[J/OL].热加工工艺:1[2023-04-13].
[2] 李德军,许孟春,吕春风,等.中间包覆盖剂开发状况分析[J].鞍钢技术,2020(1):15.
[3] 赵显久,周月明,张捷宇.钢水中间包覆盖剂MgO含量对吸附能力的影响研究[J].冶金与材料,2019,39(1):17.
[4] 程礼梅,张立峰. 中间包覆盖剂的碱度对其性能的影响[C]//第九届中国金属学会青年学术年会论文集.马鞍山:中国金属学会,2018:140.
[5] 刘昱,卢汝,李光强,等.碱性中间包覆盖剂对钢水洁净度的影响[J].武汉科技大学学报,2017,40(1):5.
[6] 杨伶俐,包燕平,刘建华, 等.连铸中间包覆盖剂冶金效果分析[J].炼钢,2007(2):34.
[7] 朱士将.半整体塞棒中间包的长寿措施[J].耐火材料,2012,46(5):393.
[8] 武宝仲,赵欣锋.影响中间包寿命的原因分析及改进措施[J].河南冶金,2018,26(2):18.
[9] 宋祖峰,陆向东,荚江霞, 等.熔融制样-X射线荧光光谱法测定钢水中间包覆盖剂的5种组分[J].理化检验(化学分册),2018,54(6):723.
[10] 王德永,刘承军,王新丽, 等.稀土氧化物对中间包覆盖剂黏性特征的影响[J].特殊钢,2003(3):29.
[11] 王峰. 唐钢铝脱氧钢二次氧化现象及抑制机理[D].北京:北京科技大学,2019.
[12] 王锦,刘宇航,刘威, 等.基于中间包冲击区的流场优化[J/OL].中国冶金,2023,33(4):97.
[13] 刘喜锚.控流装置对四流中间包钢水洁净度的影响[J].连铸,2022(5):88.
[14] 马金磊,牛帅,唐海燕, 等.帘线钢连铸七流中间包钢水流动特性及各流一致性研究[J].钢铁研究学报,2023,35(6):671.
[15] 梁笑雨.静态控制模型在转炉大废钢比冶炼中的应用[J].河南冶金,2018,26(2):40.
[16] 韩清连,李刚,霍立国. 防止中间包塞棒渣线侵蚀的生产实践[C]//第十七届全国耐火材料青年学术报告会论文集.洛阳:中国金属学会耐火材料分会,2020:139.
[17] 胡志勇,陈兴华,李家通, 等.四流大方坯连铸中间包控流结构优化与应用[J].材料与冶金学报,2022,21(5):330.
[18] 常茜萱,谭憧,刘畅, 等.板坯连铸中间包内控流装置优化的物理和数值模拟[J].炼钢,2022,38(6):29.
[19] 邢力勇,高宇,张彩东, 等.单流板坯中间包挡坝结构优化的数值模拟[J].连铸,2022(5):95.
[20] 谭文萱,孙彦辉,宋思程, 等.七流中间包流场的优化与模拟[J].钢铁研究学报2023,35(6):682.
[21] 钟巍,徐蕊,王海军,等.换包过程中连铸中间包内多相流动行为研究[J].炼钢,2022,38(4):63.
[22] 郭建军.大规格圆坯连铸带液芯快换中间包工艺实践[J].山西冶金,2022,45(5):115.
[23] 舒友亮,甘菲芳. 宝钢大方坯连铸中间包保温技术研究[C]//第十八届全国耐火材料青年学术报告会论文集. 长沙:中国金属学会耐火材料分会,2022:53.
[24] 于九利,赵伟,颜浩, 等. 资源节约型轻质环保中间包干式料的研究[C]//第十八届全国耐火材料青年学术报告会论文集.长沙:中国金属学会耐火材料分会,2022:202.
{{custom_fnGroup.title_cn}}
脚注
{{custom_fn.content}}
基金
国家自然科学基金青年科学基金资助项目(52104317)
{{custom_fund}}