全弧形连铸低合金钢板坯网状裂纹优化研究

黎建全, 高琦, 姜银昌, 吴国荣, 周明佳, 谢鑫

连铸 ›› 2024, Vol. 43 ›› Issue (5) : 98-104.

PDF(8872 KB)
欢迎访问《连铸》官方网站!今天是 2025年7月30日 星期三
PDF(8872 KB)
连铸 ›› 2024, Vol. 43 ›› Issue (5) : 98-104. DOI: 10.13228/j.boyuan.issn1005-4006.20240126
技术交流

全弧形连铸低合金钢板坯网状裂纹优化研究

  • 黎建全1, 高琦2, 姜银昌1, 吴国荣3, 周明佳1, 谢鑫3
作者信息 +

Optimal treatment of star cracks on full-arc continuous casting slab of low alloy steel

  • 黎建全1, 高琦2, 姜银昌1, 吴国荣3, 周明佳1, 谢鑫3
Author information +
文章历史 +

摘要

连铸坯网状裂纹隐藏在铸坯亚表层,人工在线检查时难以发现,加热炉烧损量不足时容易造成轧材大量的起层(起皮)缺陷。通过轧材和铸坯金相检测分析,明确了起层缺陷的原因来自铸坯网状裂纹;针对全弧形连铸机板坯网状裂纹问题,分析了低合金钢的典型元素(C、Al、N、V)、结晶器冷却强度、连铸保护渣、二冷强度等相关因素对铸坯网状裂纹缺陷的影响规律,明确了铸坯裂纹产生的原因:铸坯深振痕和大量析出物形成裂纹源,并且铸坯在流道处于脆性区且受应力过大。提出了控制板坯网状裂纹的有效措施,包括减少典型元素含量、适当提高并稳定铸机拉速、采用改进的连铸保护渣、减弱结晶器和二冷强度,提高流道质量等。相关技术措施通过大量的现场应用,减轻了低合金钢板坯网状裂纹缺陷,热轧板卷起层缺陷率由21.84%降至0.47%。

Abstract

The star cracks are hidden in the subsurface of continuous casting slab, which are difficult to be detected in manual on-line inspection, and it is easy to cause a large number of peeling defects when the burning loss of heating furnace is insufficient. Through metallographic analysis of rolled piece and slab, it is clear that the cause of defects comes from star cracks of the slab. In view of the star crack of the slab using the full-arc continuous casting machine, the influences of typical elements (C, Al, N, V), cooling intensity of mold, slag in the continuous casting, secondary cooling strength and others on the crack defects of casting slab were analyzed. The causes of the cracks in casting slab were clarified that deep vibration marks and a large amount of precipitates form the crack initiation, and the slab is located in the brittle zone in the caster and suffers excessive stress. The effective measures to control the cracks are put forward, including reducing the contents of typical elements, increasing and stabilizing the casting speed, employing improved continuous casting slag, weakening the mold strength and secondary cooling strength, improving the quality of caster, etc. After a large number of actual applications, the crack defects of low alloy steel slab are reduced, and the peeling defect rate of hot-rolled plate is reduced from 21.84% to 0.47%.

关键词

连铸板坯 / 网状裂纹 / 低合金钢 / 钢种特性 / 冷却工艺

Key words

continuous casting slab / star crack / HSLA steel / steel property / cooling process

图表

引用本文

导出引用
黎建全, 高琦, 姜银昌, . 全弧形连铸低合金钢板坯网状裂纹优化研究[J]. 连铸, 2024, 43(5): 98-104 https://doi.org/10.13228/j.boyuan.issn1005-4006.20240126
LI Jianquan, GAO Qi, JIANG Yinchang, et al. Optimal treatment of star cracks on full-arc continuous casting slab of low alloy steel[J]. Continuous Casting, 2024, 43(5): 98-104 https://doi.org/10.13228/j.boyuan.issn1005-4006.20240126

参考文献

[1] 杨才福. 钒微合金化钢的技术进展与应用[J]. 钢铁研究学报, 2020, 32(12): 1029.
[2] 刘金岳,成卓,黄禹赫,等. 铌微合金化1 800 MPa级热成形钢的高温热塑性[J]. 钢铁, 2023, 58(8): 169.
[3] 刘胜赫. 浅谈低碳含铌钢铸坯裂纹形成原因分析与改进措施[J].2021, 41(5): 53.
[4] 刘光明,李洪泉,李大明. 含铌钢铸坯横裂纹的分析及改进措施[J]. 炼钢, 2006,22(1): 37.
[5] 杨应东,胡春林,吴坚,等. 氮含量控制对S450J0-T热轧H型钢表面裂纹的影响[J]. 上海金属, 2018, 40(3): 69.
[6] 何宇明,朱斌,陈文满,等. 中厚板表面微裂纹成因及影响因素研究[J]. 钢铁, 2006, 41(1): 36.
[7] 曾建华,马晓涛,吴国荣,等. 低碳铝镇静钢冷轧起皮缺陷成因与保护渣优化[J]. 炼钢, 2017, 33(3): 68.
[8] 杨秀枝. 低碳铝镇静钢冷轧基板表面起皮缺陷成因分析及控制[J]. 连铸, 2018(1): 73.
[9] 金友林,汪国才,陆强. 连铸圆坯表面网状裂纹特征分析与控制[J]. 炼钢, 2022, 38(3): 43.
[10] 胡志刚,马春林,刘浏,等. CSP薄板坯连铸包晶反应区域的研究[J]. 钢铁研究学报, 2006, 18(7): 10.
[11] 李明贤,朱国军. 氮质量分数对铸坯角部裂纹的影响及控制[J]. 中国冶金, 2017, 27(6): 54.
[12] 沈彬彬. 钒微合金化钢的热塑性探讨[J]. 物理测试, 2019, 37(5): 9.
[13] 包石磊. 含Nb包晶钢连铸大圆坯表面横裂纹形成原因分析与对策[J]. 连铸, 2016(2): 71.
[14] 吴国荣. 含钒高氮高强耐候钢结晶器保护渣开发[J]. 炼钢, 2015, 31(1): 65.
[15] 陈远清,仇圣桃,李刚,等. Q345E钢?800 mm铸坯表面网状裂纹的分析及控制措施[J]. 特殊钢, 2018, 39(3): 43.
[16] 陈永,赵长亮,孙彦辉,等. 连铸板坯网状裂纹成因及影响因素的研究[J]. 钢铁钒钛, 2008(1): 17.
[17] 安航航,钱亮,周国强,等. 减少中频炉-连铸工艺生产板坯表面裂纹的生产实践[J]. 钢铁研究, 2013, 41(2): 56.
[18] 张大治,王皓,宿成,等. 宽厚板典型表面缺陷及其控制[J]. 钢铁研究, 2017, 45(5): 29.
[19] 孙彦辉,赵长亮,蔡开科,等. 连铸板坯表层网状裂纹的成因研究[J]. 中国冶金, 2008, 18(4): 15.
[20] 申永代,宋伟,许可. 低合金钢铸坯质量控制技术研究[J]. 连铸, 2013(3): 40.
[21] 蔡开科. 连铸坯质量控制[M]. 北京:冶金工业出版社, 2010.

PDF(8872 KB)

65

Accesses

0

Citation

Detail

段落导航
相关文章

/