Abstract:In order to research the strain hardening characteristic of high strength IF bearing phosphorus,the stress-strain curve is measured by tensile testing machine and the microstructure,textile,slip band,dislocation are analyzed by optical microscope,scanning electron microscope,transmission electron microscope respectively. The results showed that the polygonal ferrite grain were obtained of the high strength IF steel bearing 0.056% phosphorus annealed at 810 ℃ for 120 s. The yield strength of the high strength IF steel bearing was 212 MPa and tensile strength was 367.5 MPa. The plastic strain ratio[r]was 2.45 and the strain hardening index[n]was 0.28. The volume fraction of {111} plane texture was 65%. There are a small quantity of nano-size precipitates of TiC and bigger MnS and Ti4C2S2. The dislocation density increased when the strain increasing from 0.5% to 11% and the dislocation structure was dislocation lines,cellular dislocation and trapezoidal dislocation.
收稿日期: 2017-06-27
出版日期: 2018-02-26
引用本文:
朱瑞琪,宋新莉,郑爱琴,陈荣东,贾 涓,范丽霞. 含磷高强IF汽车钢的应变硬化及微观结构特征[J]. , 2018, 53(2): 55-59.
ZHU Rui-qi,SONG Xin-li,ZHENG Ai-qin,CHEN Rong-dong,JIA Juan,FAN Li-xia. Strain hardening and microstructure characteristic of high strength IF bearing phosphorus steel. Iron and Steel, 2018, 53(2): 55-59.
X.L.Song,Z.X.Yuan,J.Juan,at al,Phosphorus segregation behavior at the grain boundary in a Ti-IF steel after annealing, Scripta Materialia, 63(2010)446-448
[1]
X.L.Song,Z.X.Yuan,J.Juan,at al,Phosphorus segregation behavior at the grain boundary in a Ti-IF steel after annealing, Scripta Materialia, 63(2010)446-448
[2]
Xin-li.Song*, Kun. Peng, Ze-xi Yuan, et al. Texture, grain boundary characterization and segregation of phosphorus in an annealing interstitial free steel. Journal of Iron and Steel Research, International, 2014,21(9):844-848
[2]
Xin-li.Song*, Kun. Peng, Ze-xi Yuan, et al. Texture, grain boundary characterization and segregation of phosphorus in an annealing interstitial free steel. Journal of Iron and Steel Research, International, 2014,21(9):844-848
[3]
E.Yasuhara, K.Sakata and T.Kato. Effect of boron on the resistance to secondary working embrittlement in extra-low-C cold-rolled steel sheet [J]. ISIJ Int, 1994,34(1):99-107
[3]
E.Yasuhara, K.Sakata and T.Kato. Effect of boron on the resistance to secondary working embrittlement in extra-low-C cold-rolled steel sheet [J]. ISIJ Int, 1994,34(1):99-107
[4]
Xinli Song , Zexi Yuan , Juan Jia , Pinghe Li ,et al . Boron and phosphorus segregation behavior at grain boundary in a Ti-IF steel after annealing, Advanced Material Research, Vols:152-153(2011)320-325
[4]
Xinli Song , Zexi Yuan , Juan Jia , Pinghe Li ,et al . Boron and phosphorus segregation behavior at grain boundary in a Ti-IF steel after annealing, Advanced Material Research, Vols:152-153(2011)320-325
[5]
李峰, 吕家舜,敖列哥等,连续退火工艺对Nb-Ti-IF钢性能及再结晶织构的影响[J],钢铁,2008,43(1):64-67 LI Feng, LU Jia-shun, AO Lie-ge et al. Influence of continuous annealing on properties and recrystallization texture of Nb-Ti-IF steel[J], Iron and Steel, 2008,43(1):64-68
[5]
李峰, 吕家舜,敖列哥等,连续退火工艺对Nb-Ti-IF钢性能及再结晶织构的影响[J],钢铁,2008,43(1):64-67 LI Feng, LU Jia-shun, AO Lie-ge et al. Influence of continuous annealing on properties and recrystallization texture of Nb-Ti-IF steel[J], Iron and Steel, 2008,43(1):64-68
[6]
M.Z.Quadir, A microstructure study of the origins of γ recrystallization texture in 75% warm rolled IF steel[J], Acta Materialia 54(2006)4337-4350
[6]
M.Z.Quadir, A microstructure study of the origins of γ recrystallization texture in 75% warm rolled IF steel[J], Acta Materialia 54(2006)4337-4350
[7]
R.Saha, R.K.Ray, Texture and grain growth characteristics in a boron added interstitial free steel after cold rolling and annealing[J]. Materials Science and Engineering A527(2010)1882-1890.
[7]
R.Saha, R.K.Ray, Texture and grain growth characteristics in a boron added interstitial free steel after cold rolling and annealing[J]. Materials Science and Engineering A527(2010)1882-1890.
[8]
李龙,丁桦,杜林秀等,低碳铁素体贝氏体复相钢的拉伸应力-应变曲线分析[J],材料热处理学报,2007,28(5):46-50 LI Long, DING Hua, DU Lin-xiu et al. Analysis of stress-strain curves by tensile test in low carbon steel with a duplex microstructure of bainite and ferrite[J], Transactions of materials and heat treatment.2007,28(5):46-50
[8]
李龙,丁桦,杜林秀等,低碳铁素体贝氏体复相钢的拉伸应力-应变曲线分析[J],材料热处理学报,2007,28(5):46-50 LI Long, DING Hua, DU Lin-xiu et al. Analysis of stress-strain curves by tensile test in low carbon steel with a duplex microstructure of bainite and ferrite[J], Transactions of materials and heat treatment.2007,28(5):46-50
[9]
余海燕,周辰晓,沈嘉怡,应变硬化指数模型及其在汽车前纵梁成形和回弹防真中的应用[J],汽车工程,2016,38(6):772-779 YU Hai-yan, ZHOU Chen-xiao,SHEN Jia-yi, Strain hardening index model and its application to the forming and springback simulation of a front side rail[J], Automotive Engineering, 2016,38(6):772-779
[9]
余海燕,周辰晓,沈嘉怡,应变硬化指数模型及其在汽车前纵梁成形和回弹防真中的应用[J],汽车工程,2016,38(6):772-779 YU Hai-yan, ZHOU Chen-xiao,SHEN Jia-yi, Strain hardening index model and its application to the forming and springback simulation of a front side rail[J], Automotive Engineering, 2016,38(6):772-779
[10]
亢占英,郑建平,热镀锌双相钢应变硬化特性研究[J],宝钢技术,2015,2:32-36 KANG Zhan-ying, ZHENG Jian-ping, Study of strain hardening characteristic of hot dip galvanized dual-phase steel[J], Bao Steel Technology, 2015,2:32-36
[10]
亢占英,郑建平,热镀锌双相钢应变硬化特性研究[J],宝钢技术,2015,2:32-36 KANG Zhan-ying, ZHENG Jian-ping, Study of strain hardening characteristic of hot dip galvanized dual-phase steel[J], Bao Steel Technology, 2015,2:32-36
[11]
余永宁,金属学原理[M],北京:冶金工业出版社,2003. YU Yong-ning, Principles of metallography[M], Beijing: Metallurgical Industry Press,2003
[11]
余永宁,金属学原理[M],北京:冶金工业出版社,2003. YU Yong-ning, Principles of metallography[M], Beijing: Metallurgical Industry Press,2003