Effect of roller-typed electromagnetic stirring and its coils location on solidification behavior of a slab casting
XIAO Hong1,2, WANG Pu2, ZHENG Qing3, LIU Shun1, CHEN Xi-qing2, ZHANG Jia-quan2
1. Electromagnetic Center, Hunan Zhongke Electric Co., Ltd., Yueyang 414000, Hunan, China; 2. School of Metallurgical and Ecological Engineering, University of Science and Technology Beijing, Beijing 100083, China; 3. 4th Steelmaking and Rolling General Works, Maanshan Iron and Steel Co., Ltd., Maanshan 243000, Anhui, China
Abstract:Roller-typed electromagnetic stirring (R-EMS) is one of effective measures to control the as-cast macrostructure and prevent the occurrence of mid-way cracks for slab casting. To reveal the mechanism and the frequently attendant asymmetrical solidification along with white band, the solidification behavior of a slab casting with section of 1 600 mm×230 mm has been numerically studied upon the applications a roller-typed electromagnetic stirrer, for which a coupled electro-magnetic, fluid flow, heat transfer and solidification model has been adopted by segment to segment consecutive calculation. It has been shown that it is the tangential forces produced by R-EMS ahead of the solidification frontier and its effect on the local enriched fluid flow and temperature which promote the columnar to equiaxed crystal transformation, and eliminate the occurrence condition of mid-way cracks from as-cast structure. It is found, there exists an obvious end effect for travelling wave magnetic field in the cross section while the EMS roller being in alignment with the slab geometrically. To be exact, the magnetic induction intensity and its induced force are much larger in the other side of the slab as compared with the initial side, which should be the reason of its final asymmetrical solidification structure. However, the asymmetrical behavior can be partly alleviated by an offset location of the roller coils toward the initial side. For the present format of slab casting, the magnetic induction intensity and the final as-cast structure shows a nearly symmetrical ones with a coil offset value around 150 mm. Finally, it has been addressed that the white band of negative segregation, a scour marks left by the intensified fluid flow due to electromagnetic force, shows no unacceptable effect on the finished products presently, but should be given attention in the future for its change in the following hot rolling products and any possible other disadvantage.
肖红, 王璞, 郑晴, 刘顺, 陈希青, 张家泉. 辊式电磁搅拌线圈位置对板坯凝固行为的影响[J]. 钢铁, 2023, 58(3): 79-88.
XIAO Hong, WANG Pu, ZHENG Qing, LIU Shun, CHEN Xi-qing, ZHANG Jia-quan. Effect of roller-typed electromagnetic stirring and its coils location on solidification behavior of a slab casting[J]. Iron and Steel, 2023, 58(3): 79-88.
[1] 郭伟,龙木军,吴家璐,等.22MnB5钢溶质分配系数及TiN析出对微观偏析的影响[J].钢铁,2022,57(3):44.(GUO Wei,LONG Mu-jun,WU Jia-lu,et al.Effect of solute partition coefficient and TiN precipitation on micro-segregation of 22MnB5 steel[J].Iron and Steel,2022,57(3):44.) [2] 彭艳,刘才溢,王宁宁,等.一种新型热处理工艺对中碳钢组织性能影响[J].钢铁,2021,56(1):85.(PENG Yan,LIU Cai-yi,WANG Ning-ning,et al.Effect of a novel heat treatment process on microstructure and mechanical properties of medium carbon steel[J].Iron and Steel,2021,56(1):85.) [3] Malakondaiah G, Srinivas M, Rao P R. Ultrahigh-strength low-alloy steels with enhanced fracture toughness[J]. Progress in Materials Science, 1997, 42(1): 209.) [4] 陈禹,宋春林,贾宁波,等.电磁搅拌对石油管用圆坯内部质量的改善[J].中国冶金,2022,32(8):98.(CHEN Yu,SONG Chun-lin,JIA Ning-bo,et al.Improvement of internal quality for round billet of petroleum pipe by electromagnetic stirring[J].China Metallurgy,2022,32(8):98.) [5] 张壮,李海洋,张家泉,等.齿轮钢铸态点状偏析及其在热轧棒材中的演变[J].金属学报,2021,57(10):1281.(ZHANG Zhuang,LI Hai-yang,ZHANG Jia-quan,et al.As-cast spot segregation of gear steel and its evolution in the rolled products[J].Acta Metallurgica Sinica,2021,57(10):1281.) [6] 李博,张忠铧,张家泉,等.高强耐蚀管钢点状偏析及带状缺陷的特征与演变[J].金属学报,2019,55(6):762.(LI Bo,ZHANG Zhong-hua,ZHANG Jia-quan,et al.Characteristics and evolution of the spot segregations and banded defects in high strength corrosion resistant tube steel[J].Acta Metallurgica Sinica,2019,55(6):762.) [7] 王璞,铁占鹏,张家泉,等.连铸控流模式对大方坯及棒材组织结构与宏观偏析影响[J].工程科学学报,2021,43(8):1081.(WANG Pu,TIE Zhan-peng,ZHANG Jia-quan,et al.Macrostructure and macrosegregation behavior of bloom products under various flow control modes of the casting process[J].Chinese Journal of Engineering,2021,43(8):1081.) [8] 李华刚.板坯连铸铸流电磁搅拌辊的设计与应用[J].连铸,2022(3):56.(LI Hua-gang.Design and application of electromagnetic stirring roll for slab continuous casting machine[J].Continuous Casting,2022(3):56.) [9] 肖红,王璞,张家泉,等.行波磁场铸流搅拌提升不锈钢板坯等轴晶率[J].工程科学学报,2021,43(6):797.(XIAO Hong,WANG Pu,ZHANG Jia-quan,et al.Stirring strands via traveling-wave magnetic fields to increase the equiaxed crystal ratio of stainless-steel slab castings[J].Chinese Journal of Engineering,2021,43(6):797.) [10] Kunstreich S. Electromagnetic stirring of slabs[J]. Iron and Steel, 2005,40(9): 81.) [11] HUANG J T, WANG E G, HE J C. Numerical simulation of linear electromagnetic stirring in secondary cooling region of slab caster[J]. Journal of Iron and Steel Research International, 2003, 10(3):16.) [12] 高杰超.连铸工艺的电磁搅拌技术[J].鞍钢技术,1989(12):6.(GAO Jie-chao.Electromagnetic stirring technology for continuous casting process[J]. Anshan Steel Technology,1989(12):6.) [13] CHEN J, LIN S, LU M. Process simulation of S-EMS and its application in slab continuous casting[R]. China Steel Technical Report. Taiwan:Kaohsiung,2010.) [14] 张开,陈士富,雷洪,等.板坯二冷区电磁搅拌辊布置方式[J].辽宁科技大学学报,2018,41(5):335.(ZHANG Kai, CHEN Shi-fu, LEI Hong, et al.Study on arrangement of S-EMS rollers in secondary cooling zone of slab continuous casting machine[J]. Journal of University of Science and Technolgy Liaoning,2018,41(5):335.) [15] Natarajan T T, EI-Kaddah N.Finite element analysis of electromagnetically driven flow in sub-mold stirring of steel billets and slabs[J].ISIJ International, 1998, 38(7): 680. [16] 张宏丽,王恩刚,贾光霖,等.搅拌器的结构参数对钢液内电磁场和流场分布的影响[J].钢铁研究学报,2002,14(4):10.(ZHANG Hong-li,WANG En-gang,JIA Guang-lin,et al.Influence of geometric parameters of linear stirrer on distribution of electromagnetic fields and flow fields in molten steel[J].Journal of Iron and Steel Research,2002,14(4):10.) [17] JIANG D B, ZHU M Y, ZHANG L F. Numerical simulation of solidification behavior and solute transport in slab continuous casting with S-EMS[J]. Metals, 2019, 9(4): 452. [18] XIAO H,WANG P,YI B,et al. A numerical and experimental study on the solidification structure of Fe-Cr-Ni steel slab casting by roller electromagnetic stirring[J]. Metals, 2021, 11(1): 6. [19] 王皓,陈志军,郄俊懋,等.二冷区电磁搅拌在宽厚板铸机的研究与应用[J].连铸,2015(2):23.(WANG Hao,CHEN Zhi-jun,QIE Jun-mao,et al.Research and application of electromagnetic stirring at secondary cooling area to the heavy slab continuous caster[J].Continuous Casting,2015(2):23.) [20] 王璞,李少翔,张家泉,等.组合搅拌模式对连铸特殊钢大方坯凝固行为的影响[J].机械工程学报,2020,56(12):99.(WANG Pu,LI Shao-xiang,ZHANG Jia-quan,et al.Effect of combined stirring modes on the solidification behavior of special steel bloom casting[J].Journal of Mechanical Engineering,2020,56(12):99.) [21] 沈喆,林中泽,钟云波,等.电磁搅拌电流对连铸紫铜管组织和性能的影响[J].上海金属,2021,43(2):77.(SHEN Zhe,LIN Zhong-ze,ZHONG Yun-bo,et al.Effetc of electromagnetic stirring current on structure and properties of continuously cast copper tube[J].Shanghai Metals,2021,43(2):77.) [22] 王攀峰,吴伟勤,雷洪.耐磨钢板坯连铸二冷电磁搅拌工艺研究[J].工业加热,2021,50(11):32.(WANG Pan-fen,WU Wei-qin,LEI Hong. Study for continous casting of high carbon steelslab with S-EMS technology[J].Industrial Heating,2021,50(11):32.) [23] 梁文,吴润,黄海娥,等.碳含量对600 MPa级高强钢中心偏析和带状组织的影响[J].钢铁钒钛,2018,39(3):149.(LIANG Wen,WU Run,HUANG Hai-e,et al. Effect of carbon content on the center segregation and banded structure of the 600 MPa grade high strength steel[J].Iron Steel Vanadium Tianium,2018,39(3):149.) [24] Waboutalebi M R, Guthrie R I L, Seyedein S H. Mathematical modeling of coupled turbulent flow and solidification in a single belt caster with electromagnetic brake[J]. Applied Mathematical Modelling, 2007, 31(8): 1671.) [25] WANG P, TIE Z P, ZHANG J Q, et al. Optimizing of submerged entry nozzle for bloom continuous casting based on physical and numerical simulation[J/OL]. Steel Research International. 2022,DOI:10.1002/srin.202200402. [26] DONG Q P, ZHANG J M, YIN Y B, et al. Three-dimensional numerical modeling of macrosegregation in continuously cast billets[J]. Metals, 2017, 7(6): 209.) [27] Yuan Q, Vanka S P, Thomas B G, et al. Computational and experimental study of turbulent flow in a 0.4-scale water model of a continuous steel caster[J]. Metallurgical and Materials Transactions B, 2004, 35(5): 967.) [28] JIANG D B, WANG W L, LUO S, et al. Numerical simulation of center segregation formation in the slab continuous casting and its alleviation with mechanical reduction[J]. Steel Research International, 2018, 89(8): 1800194. [29] Kunstreich S. Electromagnetic stirring for continuous casting[J]. Revue De Metallurgie, 2003, 100(4): 395.) [30] XU Z G, WANG X H, JIANG M, et al. Investigation on formation of equiaxed zone in low carbon steel slabs[J]. Metallurgical Research and Technology, 2016, 113(1): 106.)