|
|
Austenite grain growth behavior in 25Cr2Mo1VA steel |
LU Wei1, WAN Zhen-zhen2, JIN Ying2 |
1. Zhangjiajie Institute of Aeronautical Engineering, Zhangjiajie 427000, Hunan, China;
2. Institute of Applied Physics, Jiangxi Academy of Sciences, Nanchang 330029, Jiangxi, China |
|
|
Abstract The austenite grain growth behavior of 25Cr2Mo1VA steel was investigated at different heating temperatures and holding time,then the grain size,distribution,precipitate type and its size distribution of austenite were adopted to study the effects of different heating temperature and holding time by metallographic microscopy,TEM,EDS and intercept method.The results shows that the austenite grain size increases with heating temperature,and the austenite grain size grows slowly under 900 ℃;but"mixed crystal" phenomenon is appeared at 950℃,subsequently the grain size of austenite grows quickly at over 1 000 ℃. In addition,it is also found that the austenite grain size slowly increases with the prolonging of holding time,but the effect is not much obvious than temperatures. And connecting with the scanning electron microscope analysis,it confirmes that the similar ball precipitation in the test steel is V-rich M8C7precipitated phase.According to the existing model of Anelli correction,relationship between the pinning force and the second phase particles on austenite grains,the behavior and causes of the 25Cr2Mo1VA steel grain growth are analyzed.
|
Received: 28 June 2019
|
|
|
|
[1] Maalekian M,Radis R Militzer M,et al. In situ measurement and modelling of austenite grain growth in a Ti/Nb microalloyed steel[J]. Acta Materialia,2012,60(3):1015.
[2] Show B K,Veerababu R,Balamuralikrishnan R,et al. Effect of vanadium and titanium modification on the microstructure and mechanical properties of a microalloyed HSLA steel[J]. Materials Science and Engineering:A,2010,527(6):1595.
[3] 段望春,刘少伟,董兵斌,等. 时效处理对Stellite 6B钴基高温合金组织性能的影响[J]. 中国冶金,2019,29(8):39. (DUAN Wang-chun,LIU Shao-wei,DONG Bing-bin,et al. Effect of aging treatment on microstructure and properties of Stellite 6B cobalt-based superalloy[J]. China Metallurgy,2019,29(8):39.)
[4] 张凯强,李激光,赵吉庆,等. 长期时效对ЭП866钢组织和力学性能的影响[J]. 钢铁,2018,53(2):60. (ZHANG Kai-qiang,LI Ji-guang,ZHAO Ji-qing,et al. Effect of long term aging on microstructure and mechanical properties of ЭП866 steel[J]. Iron and Steel,2018,53(2):60.)
[5] 龚志华,姚斌,王利伟,等. 热处理工艺对2Cr11Mo1VNbN耐热钢组织和性能的影响[J]. 钢铁,2019,54(6):56.(GONG Zhi-hua,YAO Bin,WANG Li-wei,et al. Effect of heat treatment process on microstructure and property of 2Cr11Mo1VNbN heat-resistant steel[J]. Iron and Steel,2019,54(6):56.)
[6] MA Yu-lin,LIU Yue,ZHAN Jun-jia,et al. Effect of tempering temperature on the precipitation behavior and mechanical properties of a martensite ferritic steel[J]. Journal of Materials Engineering and Performance,2019,28(5):2799.
[7] WU Y,ZHANG Z W,LI H H,et al. Effect of magnetic field strength on M6C carbide precipitation behavior in W6Mo5-Cr4V3 high speed steel during tempering[J]. Key Engineering Materials,2017,709(1):15.
[8] 刘祥,杜群力,李新. 加热工艺对Nb-Ti微合金钢奥氏体晶粒长大的影响[J]. 钢铁,2019,54(9):116. (LIU Xiang,DU Qun-li,LI Xin. Effect of heating process on grain growth of Nb-Ti microalloyed steel[J]. Iron and Steel,2019,54(9):116.)
[9] 陈豪,徐海峰,周天鹏,等. 淬火和低温处理对X30 CrMoN 15 1组织性能影响[J]. 钢铁,2019,54(9):85. (CHEN Hao,XU Hai-feng,ZHOU Tian-peng,et al. Effect of quenching and low temperature treatment on microstructure and properties of X30 CrMoN 15 1[J]. Iron and Steel,2019,54(9):85.)
[10] 于建国,乔桂英. Nb(C,N)溶解对高铌奥氏体晶粒长大行为的影响[J]. 中国冶金,2019,29(5):48.(YU Jian-guo,QIAO Gui-ying. Effect of Nb(C,N) dissolution on growth behavior of high Nb austenite grains[J]. China Metallurgy,2019,29(5):48.)
[11] 王程明,王福明,肖寄光,等. Cr-Mo-V高铁制动盘用钢的奥氏体晶粒长大行为[J]. 金属热处理,2017,42(12):14.(WANG Cheng-ming,WANG Fu-ming,XIAO Ji-guang,et al. Austenite grain growth behavior of Cr-Mo-V steel for high speed railway brake disc[J]. Heat Treatment of Metals,2017,42(12):14.)
[12] 蔡欣,孙明月,王卫. 8Cr4Mo4Ni4V航空轴承钢高温奥氏体晶粒长大的数学模型[J]. 材料工程,2018,46(9):131.(CAI Xin,SUN Ming-yue,WANG Wei,et al. Mathematical models of austenite grain growth of 8Cr4Mo4Ni4V aviation bearing steel at high temperature[J]. Journal of Materials Engineering,2018,46(9):131.)
[13] Yi M,Sugiyama S,Yanagimoto J. Effects of heat treatment on microstructure and mechanical properties of Cr-V-Mo steel processed by recrystallization and partial melting method[J]. Journal of Materials Processing Technology,2014,214(1):87.
[14] Sellars C M,Whiteman J A. Recrystallization and grain growth in hot rolling[J]. Metal Science,1979,13(3/4):187.
[15] 雍岐龙,李永福,孙珍宝,等. 第二相与晶粒粗化时间及粗化温度[J]. 钢铁,1993,28(9):45. (YONG Qi-long,LI Yong-fu,SUN Zhen-bao,et al. Second-phase on grain coarsening time and temperature[J]. Iron and Steel,1993,28(9):45.)
[16] Gusev A I,Rempel A A,Magerl A J. Disorder and Order in Strongly Nonstoichiometric Compounds[M]. Berlin:Physics And Astronomy,2001.
[17] 汪杨鑫,赵秀明,毛向阳,等. SCr420H钢奥氏体晶粒长大动力学[J]. 钢铁,2018,53(7):80.(WANG Yang-xin,ZHAO Xiu-ming,MAO Xiang-yang,et al. Kinetics of austenite grain growth in SCr420H steel[J]. Iron and Steel,2018,53(7):80.)
[18] Meng Y,Sugiyama S,Yanagimoto J,et al. Effects of heat treatment on microstructure and mechanical properties of Cr-V-Mo steel processed by recrystallization and partial melting method[J]. Journal of Materials Processing Technology,2014,214(1):87.
[19] YANG W,GAO F,WEI G,et al. Ostwald ripening growth of silicon nitride nanoplates[J]. Crystal Growth and Design,2010,10(1):29.
[20] 陈正宗,刘正东,包汉生,等. C-HRA-3耐热合金奥氏体晶粒长大动力学[J]. 钢铁,2017,52(7):64.(CHEN Zheng-zong,LIU Zheng-dong,BAO Han-sheng,et al. Kinetics of austenite grain growth in heat-resistant alloy C-HRA-3[J]. Iron and Steel,2017,52(7):64.)
[21] Dub V A,Rodin A,Bokstein B,et al. Modeling of the carbide growth kinetics in the low alloyed steels[J]. Materials Letters,2018,215:134.
[22] 吴丹,王福明,王程明,等. Cr-Mo-V系高铁制动盘用钢的热力学研究[J]. 材料热处理学报,2016,37(8):228.(WU Dan,WANG Fu-ming,WANG Cheng-ming,et al. Thermoynamic of Cr-Mo-V steel for high-speed railway brake discs[J]. Transactions of Materials and Heat Treatment,2016,37(8):228.)
[23] 雍岐龙,郑鲁. 固溶度积公式、理想化学配比值与微合金钢化学成分的设计[J]. 钢铁,1988,23(7):47.(YONG Qi-long,ZHENG Lu. Solid solubility formula and stoichiometry on the composition design of microalloy steels[J]. Iron and Steel,1988,23(7):47.)
[24] 胡春东,曾斌,孟利,等. 奥氏体化温度对3Cr3Mo2NiVNb钢组织和力学性能的影响[J]. 热加工工艺,2018,47(22):242.(HU Chun-dong,ZENG Bin,MENG Li,et al. Effect of austenitizing temperature on microstructure and mechanical properties of 3Cr3Mo2NiVNb steel[J]. Hot Working Technology,2018,47(22):242.) |
[1] |
CAO Yun-fei, YU Wei, LIU Min, JIANG Rui, WANG Chun. Austenite grain growth model of 38MnSiVS bearing microalloyed forging steel[J]. Iron and Steel, 2020, 55(5): 103-108. |
[2] |
WANG Huan, HU Jia-li, ZHANG Chao-lei, LI Jian, MIAO Hong-sheng. Mixed crystal of austenite grain size in track pins 1E1158M steel[J]. Iron and Steel, 2020, 55(11): 126-132. |
[3] |
DU Hai-ming, FEI Xin-gang, ZHANG Jing . Fracture analysis of 42CrMo anchor[J]. PHYSICS EXAMINATION AND TESTING, 2020, 38(1): 49-. |
[4] |
LIU Xiang,DU Qunli,LI Xin. Effect of heating process on grain growth of#br#
NbTi microalloyed steel[J]. Iron and Steel, 2019, 54(9): 116-120. |
[5] |
YE Ya-ping1,YIN Shu-biao1,4,GAO Peng1,ZHANG Yong-qing2,CHEN Wei3,CAO Jian-chun1. Effect of soaking temperature on austenitization and solid solution of niobium in antiseismic rebar[J]. JOURNAL OF IRON AND STEEL RESEARCH , 2019, 31(9): 830-836. |
[6] |
SONG Xin,YANG Haifeng,WANG Chuan,QU Zhiguo,LI Xinyu,WANG Dongming. Microstructures and properties of 1 100MPa grade ultrahigh strength steel after heat treatments[J]. JOURNAL OF IRON AND STEEL RESEARCH , 2019, 31(6): 592-600. |
|
|
|
|