|
|
Crystallization of CaO-SiO2-Al2O3 based inclusions in solid steel killed by Si-Mn alloys |
MENG Yao-qing1,2, LI Jian-li1,2, ZHU Hang-yu1,2, WANG Kun-peng3, WANG Wei4 |
1. Key Laboratory for Ferrous Metallurgy and Resources Utilization of Ministry of Education, Wuhan University of Science and Technology, Wuhan 430081, Hubei, China; 2. Hubei Provincial Key Laboratory of New Processes of Ironmaking and Steelmaking, Wuhan University of Science and Technology, Wuhan 430081, Hubei, China; 3. Technology Center, Zenith Steel Group Co., Ltd., Changzhou 213011, Jiangsu, China; 4. Rolling Plant, Jiangsu Yong Gang Group Co., Ltd., Zhangjiagang 215628, Jiangsu, China |
|
|
Abstract In order to avoid the harm of high melting point hard inclusions such as Al2O3 and MgO·Al2O3 to subsequent processing of steel and product service properties, inclusion plasticizing control technique by Si-Mn killed is adopted for some steels, such as valve-spring steel, saw-wire steel and the thinnest stainless steel. It is insufficient for inclusion plasticizing control technique to focus only on whether the inclusion composition is in the low melting point region of phase diagram. The good plastic deformation of silicate inclusions in steel under non-liquid condition is mainly due to their properties of glass materials, and their softening temperature is obviously lower than hot rolling temperature. The hot rolling rheology of silicate inclusions largely depends on their crystallization state, so the transition of the inclusion from glassy state to crystalline state needs to be studied and controlled. The differences between glassy and crystalline inclusions were compared in terms of microstructure and microhardness change during heating, and the adverse effects of inclusion crystallization on the inclusion plasticizing control technique were pointed out. Through industrial examples and literature reports, it was clarified that glass inclusions may undergo crystallization transformation during steel solidification and heat treatment prior to hot rolling. In order to prevent serious crystallization of glassy inclusions, it is necessary to optimize the heating temperature and time of bloom/billet by combining the TTT curve of inclusions, or controlling the inclusion composition to fall into the more stable region of glass phase. Based on the research of current scholars, it is considered that the eutectic zone of tridymite, pseudo-wollastonite and anorthite is the ideal composition region for CaO-SiO2-Al2O3 system inclusions to realize glass state stability control. The influence of magnesium oxide and alkali oxides on the crystallization properties of oxide inclusions in Si-Mn killed steel still needs to be studied further. And the TTT diagrams for relevant oxide inclusion compositions can be studied by the method such as SHTT (single hot thermocouple technology).
|
Received: 27 January 2022
|
|
|
|
[1] Thornton P A. The influence of nonmetallic inclusions on the mechanical properties of steel: A review[J]. Journal of Materials Science, 1971, 6(4): 347. [2] Murakami Y. Effects of small defects and nonmetallic inclusions on the fatigue strength of metals[J]. Key Engineering Materials, 1991, 51(1):37. [3] Ånmark N, Karasev A, Jönsson P G. The effect of different non-metallic inclusions on the machinability of steels[J]. Materials, 2015, 8(2):751. [4] Sarma D S, Karasev A V, Jönsson P G. On the role of non-metallic inclusions in the nucleation of acicular ferrite in steels[J]. ISIJ International, 2009, 49(7):1063. [5] 刘城城,张立峰,任英,等. 非金属夹杂物对不锈钢耐点蚀性能影响的综述[J]. 钢铁研究学报,2021,33(10):1040. (LIU Cheng-cheng, ZHANG Li-feng, REN Ying, et al. Review on effect of non-metallic inclusions on pitting corrosion resistance of stainless steel[J]. Journal of Iron and Steel Research, 2021, 33(10): 1040.) [6] 王林珠, 李翔, 刘录凯, 等. 镍基高温合金中非金属夹杂物成分和特征控制[J]. 中国冶金, 2021, 31(5): 32. (WANG Lin-zhu, LI Xiang, LIU Lu-kai, et al. Control on composition and characteristics of non-metallic inclusions in nickel-base superalloy[J]. China Metallurgy, 2021, 31(5): 32.) [7] 梁佰战. 转炉轴承钢非金属夹杂物来源分析[J]. 中国冶金, 2020, 30(7): 68. (LIANG Bai-zhan. Analysis on source of non-metallic inclusions in bearing steel produced in LD process[J]. China Metallurgy, 2020, 30(7): 68.) [8] 王昆鹏,姜敏,王新华,等. 钢帘线和切割丝用钢夹杂物控制技术的进展[J]. 特殊钢,2016,37(2):26. (WANG Kun-peng, JIANG Min, WANG Xin-hua, et al. Progress of control technology of inclusions in steel for tire cord and saw wire[J]. Special Steel, 2016, 37(2): 26.) [9] 王强, 朱航宇, 孙剑, 等. SWRCH45K冷镦钢非金属夹杂物生成及演变行为[J]. 中国冶金, 2020, 30(11): 41. (WANG Qiang, ZHU Hang-yu, SUN Jian, et al. Formation and evolution behavior of non-metallic inclusions in SWRCH45K cold heading steel[J]. China Metallurgy, 2020, 30(11): 41.) [10] 雷家柳,薛正良,朱航宇,等.子午线轮胎用帘线钢非金属夹杂物的研究进展[J].钢铁研究学报,2018,30(11):847. (LEI Jia-liu, XUE Zheng-liang, ZHU Hang-yu, et al. Research progress on non-metallic inclusion in tire cord steel for radial tire[J]. Journal of Iron and Steel Research, 2018, 30(11): 847.) [11] CHEN C, JIANG Z, LI Y, et al. State of the art in the control of inclusions in tire cord steels and saw wire steels-a re-view[J]. Steel Research International, 2019, 90(8):1800547. [12] 三村毅.帘线钢、气门簧用钢中夹杂物的控制[C]//第182,183回西山纪念技术讲座:高纯度·高洁净钢冶炼技术专题.日本:日本钢铁协会,2004:125.(Tsuyoshi M. Control of inclusions in tire cord steel and valve spring steel[C]// 182,183 Times of Nishiyama Mark Technology Lectures. Japan: The Iron and Steel Institute of Japan, 2004: 125.) [13] Tetsuo J, Todayoshi F, Sumie S, et al. High strength, oil-tempered steel wire for valve springs, manufactured by rapid heating mono-strand process[J]. Kobelco Technology Review, 2007, 27(11): 23. [14] Ladutkin D, Korte E, Bleymehl M, et al. Advantages of Si deoxidation of bearing steels for steel cleanness and for composition and morphology of nonmetallic inclusions in rolled product[J]. Bearing Steel Technologies, 2017,11:48. [15] Hashimoto K, Fujimatsu T, Tsunekage N, et al. Study of rolling contact fatigue of bearing steels in relation to various oxide inclusions[J]. Materials and Design, 2011, 32:1605. [16] Shimamoto M, Tamura E, Owaki A, et al. Influence of modified oxide inclusions on initiation of rolling contact fatigue cracks in bearing steel[J]. Kobelco Technology Review, 2020, 38(3):80. [17] Kim W Y, Kim K S, Kim S Y. Evolution of non-metallic inclusions in Si-killed stainless steelmaking[J]. Metallurgical and Materials Transactions B, 2021, 52(2): 652. [18] 王天翔. “手撕钢”诞生记[J]. 企业管理,2019(9):76. (WANG Tian-xiang. The birth of “hand tearing steel”[J]. Enterprise Management, 2019(9): 76.) [19] Stouvenot F, Gaye H, Gatellier C, et al. Secondary steelmaking slag treatment for inclusions control in semi-killed steels[C]//52nd Electric Furnace Conference Proceedings. United States: ISS-AIME, 1994: 423. [20] WANG K, JIANG M, WANG X, et al. Formation mechanism of CaO-SiO2-Al2O3-(MgO) inclusions in Si-Mn-killed steel with limited aluminum content during the low basicity slag refining[J]. Metallurgical and Materials Transactions B, 2016, 47(1): 282. [21] 朱苗勇,邓志银. 钢精炼过程非金属夹杂物演变与控制[J]. 金属学报,2022,58(1):28. (ZHU Miao-yong, DENG Zhi-yin. Evolution and control of non-metallic inclusions in steel during secondary refining process[J]. Acta Metallurgica Sinica, 2022, 58(1): 28.) [22] Kirihara K. Production technology of wire rod for high tensile strength steel cord[J]. Kobelco Technology Review, 2011, 30: 62. [23] 张博,王福明,李长荣. SiO2-Al2O3-CaO-MgO系夹杂物低熔点区域优化及控制的热力学计算[J]. 钢铁,2011,46(1):39. (ZHANG Bo, WANG Fu-ming, LI Chang-rong. Thermodynamic calculations on low melting point area of SiO2-Al2O3-CaO-MgO inclusion and its control[J]. Iron and Steel, 2011, 46(1): 39.) [24] 崔怀周,赵昊乾,陈伟庆. 国内外帘线钢盘条中夹杂物对比[J]. 炼钢,2011,27(6):74. (CUI Huai-zhou, ZHAO Hao-qian, CHEN Wei-qing. Contrast of inclusions in wire rod for steel cord from domestic and overseas[J]. Steelmaking, 2011, 27(6): 74.) [25] 孟耀青,赵昊乾,腾艳峰,等. 钙处理对硅脱氧弹簧钢55SiCr氧化物夹杂的影响[J]. 钢铁研究学报,2019,31(6):538. (MENG Yao-qing, ZHAO Hao-qian, TENG Yan-feng, et al. Influence of calcium treatment on oxide inclusions in Si-killed spring steel 55SiCr[J]. Journal of Iron and Steel Research, 2019, 31(6): 538.) [26] Rocabois P, Pontoire J N, Gayes H, et al. Crystallization of oxide inclusions and their rheology during hot rolling[J]. Revue De Metallurgie-Cahiers D Informations Techniques, 1997, 94(11): 1393. [27] Nürnberg F, Kühn B, Rollmann K. Metrology of fused silica[C]//Laser-Induced Damage in Optical Materials 2016. Colorado: SPIE, 2016: 42. [28] Shiraiwa T, Fujino N, Matsuno F. Properties of nonmetallic inclusions in steels[J]. The Sumitomo Search,1974,25(11):85. [29] MENG Y, LI J, WANG K, et al. Effect of the bloom-heating process on the inclusion size of Si-killed spring steel wire rod[J]. Metallurgical and Materials Transactions B, 2022,53(4):2647. [30] Faulring G M. Inclusion modification in semi-killed steels[J]. Iron and Steelmaker, 1999, 26(7):29. [31] 王昆鹏,王郢,廖家明,等. 超深拉拔类线材夹杂物及断口分析[J]. 钢铁,2022,57(2):101. (WANG Kun-peng, WANG Ying, LIAO Jia-ming, et al. Investigation on inclusions and breakages in ultra-deep drawing wire rod[J]. Iron and Steel, 2022, 57(2): 101.) [32] Zanotto E D, Mauro J C. The glassy state of matter: Its definition and ultimate fate[J]. Journal of Non-Crystalline Solids, 2017, 471: 490. [33] 孟耀青,王伟,李家杨,等. 硅脱氧弹簧钢55SiCr玻璃态夹杂在铸坯加热过程中的结晶变化[J]. 炼钢,2021,37(2):58.(MENG Yao-qing, WANG Wei, LI Jia-yang, et al. Crystallization behavior of glassy inclusions in Si-killed spring steel 55SiCr during bloom and billet heating[J]. Steelmaking, 2021,37(2):58.) [34] Rocabois P, Pontoire J N, Lehmann J, et al. Crystallization kinetics of Al2O3-CaO-SiO2 based oxide inclusions[J]. Journal of Non-Crystalline Solids,2001, 282(1): 98. [35] Gatellier C, Gaye H, Lehmann J, et al. Physico-chemical aspects of the behaviour of inclusions in steels[J]. Steel Research International, 1993, 64(1): 87. [36] 匡敬忠. 冷却-加热对CaO-SiO2-Al2O3系玻璃析晶动力学的影响[J]. 材料热处理学报,2012,33(1):37. (KUANG Jing-zhong. Effect of cooling-heating on crystallization kinetics of CaO-SiO2-Al2O3 system glass[J]. Transactions of Materials and Heat Treatment, 2012, 33(1): 37.) [37] Auclair G, Falcoz-Vigne M, Lecouturier F, et al. Superclean steel for spring applications[J]. Wire Journal International, 1998,31(3):84. [38] Piva S, Zhang S, Pistorius P.C. Effect of microsegregation on non-metallic inclusions in Si-Mn killed Steels[C]//Proceedings of the Iron and Steel Technology Conference. Philadelphia: Association for Iron and Steel Technology, 2018:1631. [39] Robinson S W. The Plastic Deformation of Non-metallic Inclusions in Steel[D]. Sheffield: University of Sheffield,1977. [40] YANG H, YE J, WU X, et al. Optimum composition of CaO-SiO2-Al2O3-MgO slag for spring steel deoxidized by Si and Mn in production[J]. Metallurgical and Materials Transactions B, 2016, 47(2): 1435. [41] Sugimura T, Kimura S, Sakamoto K, et al. High Cleanliness Spring Steel and High Cleanliness Spring Excellent in Fatigue Properties: USA, US009441695B2[P]. 2016-09-13[2022-01-24]. [42] LI Y, CHEN C, JIANG Z, et al. Application of alkali oxides in LF refining slag for enhancing inclusion removal in C96V saw wire steel[J]. ISIJ International, 2018, 58(7): 1232. [43] CHEN L, CHEN W, HU Y, et al. Effect of Na2CO3 addition on inclusions in high-carbon steel for saw wire[J]. Transactions of the Indian Institute of Metals, 2018, 71(2): 383. [44] CHEN L, CHEN W, HU Y, et al. Effect of K2CO3 addition on inclusions in high-carbon steel for saw wire[J]. High Temperature Materials and Processes, 2018, 37(8): 701. [45] Mutale C T, Cramb A W, Claudon T, et al. Observation of the crystallization behavior of a slag containing 46 wt pct CaO, 46 wt pct SiO2, 6 wt pct Al2O3, and 2 wt pct Na2O using the double hot thermocouple technique[J]. Metallurgical and Materials Transactions B, 2005, 36(3): 417. [46] 唐续龙,郭敏,王习东,等. 基于修正的(NBO/T)比值的黏度模型[J]. 北京科技大学学报,2010,32(12):1542. (TANG Xu-long, GUO Min, WANG Xi-dong, et al. Estimation model of viscosity based on modified (NBO/T) ratio[J]. Journal of University of Science and Technology Beijing, 2010, 32(12): 1542.) [47] Sugimura T, Deura T, Sakamoto K, et al. Effect of Li2O addition on crystallization behavior of CaO-Al2O3-MgO based inclusions[J]. ISIJ International, 2011, 51(12): 1982. [48] Sugimura T, Sakamoto K, Yoshida A, et al. Ultra Clean Spring Steel: USA, US007429301B2[P]. 2008-09-30[2022-01-24]. [49] 张雪良,杨树峰,李京社,等. 热处理对硅脱氧304不锈钢内氧化物夹杂的影响[J]. 钢铁,2018,53(5):32. (ZHANG Xue-liang, YANG Shu-feng, LI Jing-she, et al. Effect of heat treatment on oxide inclusion in Si-killed 304 stainless steel[J]. Iron and Steel, 2018, 53(5): 32.) [50] 鲁达,李维福,任英,等. 固态钢加热过程中非金属夹杂物转变研究进展[J]. 钢铁研究学报,2020,32(12):1021. (LU Da, LI Wei-fu, REN Ying, et al. Transformation of non-metallic inclusions in solid steel during heating process[J]. Journal of Iron and Steel Research, 2020, 32(12): 1021.) [51] 战东平,杨永坤,姜周华,等. 加热过程钢中夹杂物演变的研究进展[J]. 钢铁,2021,56(10):16. (ZHAN Dong-ping, YANG Yong-kun, JIANG Zhou-hua, et al. A review of research on inclusions evolution in steel during heating process[J]. Iron and Steel, 2021, 56(10): 16.) [52] Zhao C, Jung S M, Kashiwaya Y, et al. Simulation test for crystallization of inclusions in semi-killed steels during heat treatment prior to hot rolling[J]. ISIJ International, 2008, 48(6): 747. [53] LI Z, LIU N, YANG W, et al. Effect of basicity on the crystallization behavior of 25wt.% Al2O3-SiO2-CaO non-metallic inclusion-type oxides[J]. Journal of Non-Crystalline Solids,2022, 579: 121367. [54] 元田委,袁坚,郑伟宏,等. 碱金属氧化物引入量对MgO-Al2O3-SiO2微晶玻璃结构及其化学增强效果的影响[J]. 硅酸盐通报,2019,38(5):1522. (YUAN Tian-wei, YUAN Jian, ZHENG Wei-hong, et al. Effect of the introduction of alkali metal oxides on the structure and chemical enhancement process of MgO-Al2O3-SiO2glass-ceramics[J]. Bulletin of the Chinese Ceramic Society, 2019, 38(5): 1522.) [55] 朱立光,胡斌,王杏娟,等. 连铸保护渣析晶行为的研究现状及展望[J]. 材料导报,2013,27(6):77. (ZHU Li-guang, HU Bin, WANG Xing-juan, et al. Research status and prospect about crystallization behavior of continuous casting protective slag[J]. Materials Reports, 2013, 27(6): 77.) [56] Ta Y, Hoshino T, Tobo H, et al. Behavior of crystallization on a continuous solidification of blast furnace slag[J]. ISIJ International, 2019,59(10):1917. |
[1] |
LI Hua-ying, LIU Guo-xiang, SONG Yao-hui, ZHAO Hai-quan, LI Juan, TIAN Ying-hao. Hot deformation behavior of antibacterial stainless steel containing 4.35% copper[J]. Iron and Steel, 2022, 57(9): 123-129. |
[2] |
LIU Zhongqiu1, 2,YAO Yuchao1,WU Yingdong1,LI Baokuan1,XIAO Lijun2,GAN Yong2. Application of two population balance models in predicting multisize bubbly flow in continuous casting mold[J]. JOURNAL OF IRON AND STEEL RESEARCH , 2022, 34(8): 790-798. |
[3] |
ZHOU Hai-chen, LIU Guo-liang, LI Hai-bo, DENG Xiao-xuan, JI Chen-xi, LUO Yan-zhao. Online prediction method of slag entrainment in mold based on numerical simulation[J]. Iron and Steel, 2022, 57(8): 103-110. |
[4] |
GAO Xin-qiang, PENG Wei, FAN Zeng-wei, BAI Jia-xin, WEI Xi-cheng, DONG Han. Effect of purity on recrystallization texture and grain Schmid factor of pure iron[J]. Iron and Steel, 2022, 57(8): 160-167. |
[5] |
CHEN Bin, LI Hai-bo, JI Chen-xi, LIU Guo-liang, ZHOU Hai-chen. Influence of casting parameters on level fluctuations and its industrial application[J]. Iron and Steel, 2022, 57(7): 86-94. |
[6] |
FU Zhixiang1,2,YANG Gengwei1,2,XU Yaowen1,2,HU Zhuoli1,2,YIN Qilong1,2,ZHAO Gang1,2. Study on dynamic recrystallization behavior of hotrolled TRIP steel produced by CSP process[J]. JOURNAL OF IRON AND STEEL RESEARCH , 2022, 34(6): 596-604. |
|
|
|
|