|
|
Cyclic characteristics of surface-modified layers of 18CrNiMo7-6 alloy steel |
WANG Gang, LU Liu-cheng, ZHANG Yue, WANG Shu-yan, CUI Chao |
School of Mechanical and Power Engineering, Zhengzhou University, Zhengzhou 450001, Henan, China |
|
|
Abstract In order to study the constitutive characteristics of the surface-modified layers of 18CrNiMo7-6 alloy steel under cyclic loading,18CrNiMo7-6 alloy steel was carburized and heat treated. Round bar samples with different surface modified layer thickness were obtained through chemical corrosion. Monotonic tensile test and cyclic loading test were carried out respectively to analyze the differences of mechanical properties,hysteretic properties,energy consumption capacity and microstructure. The skeleton curve under cyclic loading was fitted,and the difference between its mechanical properties and that under monotonic tension was studied. The cyclic constitutive parameters of the surface-modified layers under cyclic loading were calibrated based on the Chaboche cyclic constitutive model,the simulation were verified by the finite element software ABAQUS. The results showed that the hardness, yield strength and tensile strength of the sample increase with the increase of the thickness of the surface modified layer under monotonic tension. Under the same strain amplitude loading,the thicker the surface metamorphic layer was,the greater the response stress was,the lower the energy dissipation coefficient was,and the weaker the energy dissipation capacity of the material was. Ramberg-Osgood model can better fit the cyclic skeleton curve of surface-modified layers under cyclic loading. The main component of 18CrNiMo7-6 alloy steel was lath martensitewith the increase of surface modification layer thickness,the higher the dislocation density was. The matrix material of 18CrNiMo7-6 alloy steel showed the characteristics of cyclic hardening under cyclic loading,and the sample gradually showed the characteristics of cyclic softening with the increase of the thickness of the surface-modified layers. Chaboche cyclic constitutive model can accurately fit the mechanical response of samples with different surface-modified layers under cyclic loading.
|
Received: 25 February 2022
|
|
|
|
[1] XUE L. A unified expression for low cycle fatigue and extremely low cycle fatigue and its implication for monotonic loading[J]. International Journal of Fatigue,2008,30(10/11):1691. [2] Masatoshi K. Extremely low cycle fatigue life prediction based on a new cumulative fatigue damage model[J]. International Journal of Fatigue,2002,24(6):699. [3] 王宏中,邹宗园,李银潇,等. Fe-19Cr-0.2Ni-5Mn-0.2Si在循环加载下的马氏体相变规律及其影响[J]. 钢铁,2021,56(12):119.(WANG Hong-zhong,ZOU Zong-yuan,LI Yin-xiao,et al. Martensitic transformation characteristics and its effect of steel Fe-19Cr-0.2Ni-5Mn-0.2Si under cyclic loading[J]. Iron and Steel,2021,56(12):119.) [4] 班慧勇,施刚,朱俊成,等. 不同复合比下不锈钢复合钢材循环本构模型研究[J]. 土木工程学报,2019,52(10):68.(BAN Hui-yong,SHI Gang, ZHU Jun-cheng,et al. Study on cyclic constitutive model of stainless-cladding bimetallic steel with different cladding ratios[J]. China Civil Engineering Journal,2019,52(10):68.) [5] ZHU Yi-lin,KANG Guo-zheng,YU Chao. A finite cyclic elasto-plastic constitutive model to improve the description of cyclic stress-strain hysteresis loops[J]. International Journal of Plasticity,2017,95:191. [6] Chaboche J L. On some modifications of kinematic hardening to improve the description of ratchetting effects[J]. International Journal of Plasticity,1991,7(7):661. [7] Prager W. A new method of analyzing stresses and strains in work-hardening plastic solids[J]. ASME Journal of Applied Mechanics,1956,23:493. [8] Chen W F. Theory of Beam-Columns[M]. America:McGraw-Hill Inc,1976. [9] Ramberg W,Osgood W R. Description of stress-strain curves by three parameters[J]. NACA Technical Note,1943,902:1. [10] Chaboche J L. Time-independent constitutive theories for cyclic plasticity[J]. International Journal of Plasticity,1986,2(2):149. [11] 郝梦飞,刘安,徐广涛. 表面完整性对18CrNiMo7-6合金钢机械性能的影响[J]. 重庆理工大学学报,2020,34(6):118.(HAO Meng-fei,LIU An,XU Guang-tao. Effects of surface integrity on the mechanical properties of 18CrNiMo7-6 alloy steel[J]. Journal of Chongqing University of Technology,2020,34(6):118.) [12] 中国国家标准化管理委员会. GB/T 228.1—2010 金属材料 拉伸试验 第1部分:室温试验方法[S]. 北京:中国标准出版社,2010.(China National Standardization Administration Committee. GB/T 228.1—2010 Metallic Materials-Tensile Testing-Part1:Methonod of Test at Room Temperature[S]. Beijing: China Standards Press,2010.) [13] 中国国家标准化管理委员会. GB/T 15248—2008 金属材料轴向等幅低循环疲劳试验方法[S]. 北京:中国标准出版社,2008.(China National Standardization Administration Committee. GB/T 15248—2008 The Test Method for Axial Loading Constant-Amplitude Low-Cycle Fatigue of Metallic Materials[S]. Beijing:China Standards Press,2008.) [14] 王萌,钱凤霞,杨维国. 低屈服点LYP160钢材本构关系研究[J]. 建筑结构学报,2017,38(2):55.(WANG Meng,QIAN Feng-xia,YANG Wei-guo. Constitutive behavior of low yield point steel LYP160[J]. Journal of Building Structures,2017,38(2):55.) [15] 钱临照. 晶体中的位错[M]. 北京:北京大学出版社,2014.(QIAN Lin-zhao. Dislocations in Crystals[M]. Beijing:Peking University Press,2014.) [16] 石永久,王萌,王元清. 循环荷载作用下结构钢材本构关系试验研究[J]. 建筑结构学报,2012,15(3):5.(SHI Yong-jiu,WANG Meng,WANG Yuan-qing. Experimental study of structural steel constitutive relationship under cyclic loading[J]. Journal of Building Materials,2012,15(3):5.) |
|
|
|