|
|
Analytical and experimental on the flow rule of molten pool for twin roll strip casting |
DU Feng-shan,[LU] Zheng,WANG San-zhong,HUANG Hua-gui,SUN Jing-na,XU Zhi-qiang |
(National Engineering Research Center for Equipment and Technology of Cold Strip Rolling, Yanshan University, Qinhuangdao 066004, Hebei, China) |
|
|
Abstract According to the similarity principle,a water model experiment platform for Twin-roll strip casting was set up by 1[∶]1,then the influence of casting speed on the flow of molten pool has been studied,and a low-Reynolds-number turbulence mathematic model was developed to study the flow field and the temperature field of the molten pool. The results showed that the backflow occurred at the center region of molten pool by the effects of fluid viscosity and the rollers extrusion. The center region backflow would stir the molten pool and reduce the temperature to some extent which would make the temperature field and solute field uniform and steady. With the casting speed increased,the location of backflow would move down,the area of backflow zone would enlarge,and the effect of backflow would enhance. However,rapid casting speed would exacerbate the fluid level fluctuation or decrease the location of Kiss point excessively,which can affect the production quality.
|
Received: 02 April 2015
Published: 06 January 2016
|
|
|
|
|
[1] |
Zhang Peng, Zhang Yunkun, Liu Ligang, Ren Xuejun, Zhang Yue, Fang Yuan, Yang Qingxiang.. Numerical simulation on the stress field of austenite stainless steel during twin-roll strip casting process[J].Computational Materials Science, 2012, 52(1):61-67
|
[1] |
Zhang Peng, Zhang Yunkun, Liu Ligang, Ren Xuejun, Zhang Yue, Fang Yuan, Yang Qingxiang.. Numerical simulation on the stress field of austenite stainless steel during twin-roll strip casting process[J].Computational Materials Science, 2012, 52(1):61-67
|
[2] |
Wang Bo, Zhang Jie-yu, Fan Junfei, Zhao Shunli, Fang Yuan, An Shengli. Water modeling of twin-roll strip casting[J].Journal of iron and steel research, international, 2006, 13(1):14-17
|
[2] |
Wang Bo, Zhang Jie-yu, Fan Junfei, Zhao Shunli, Fang Yuan, An Shengli. Water modeling of twin-roll strip casting[J].Journal of iron and steel research, international, 2006, 13(1):14-17
|
[3] |
张宁, 唐萍, 祝明妹等.镁合金双辊薄带连铸机布流系统研究[J].材料导报:纳米与新材料专辑, 2010, 24(2):237-239
|
[3] |
张宁, 唐萍, 祝明妹等.镁合金双辊薄带连铸机布流系统研究[J].材料导报:纳米与新材料专辑, 2010, 24(2):237-239
|
[4] |
Bae J W, Kang C G, Kang S B.Mathematical model for the twin roll type strip continuous casting of magnesium alloy considering thermal flow phenomena[J].Journal of materials processing Technology, 2007, 191(1-3):251-255
|
[4] |
Bae J W, Kang C G, Kang S B.Mathematical model for the twin roll type strip continuous casting of magnesium alloy considering thermal flow phenomena[J].Journal of materials processing Technology, 2007, 191(1-3):251-255
|
[5] |
Zhao H, Li P J, HE L J.Coupled analysis of temperature and flow during twin-roll casting of magnesium alloy strip[J].Journal of Materials Processing Technology, 2011, 211(6):1197-1202
|
[5] |
Zhao H, Li P J, HE L J.Coupled analysis of temperature and flow during twin-roll casting of magnesium alloy strip[J].Journal of Materials Processing Technology, 2011, 211(6):1197-1202
|
[6] |
金珠梅, 赫冀成, 徐广伤.双辊连续铸轧工艺中流场、温度场和热应力场的数值计算[J].金属学报, 2000, 39(4):391-394
|
[6] |
金珠梅, 赫冀成, 徐广伤.双辊连续铸轧工艺中流场、温度场和热应力场的数值计算[J].金属学报, 2000, 39(4):391-394
|
[7] |
Miao Y, Zhang X, Di H, et al.Numerical simulation of the fluid flow,heat transfer,and solidification of twin-roll strip casting[J].Journal of Materials Processing Technology, 2006, 174(1-3):7-13
|
[7] |
Miao Y, Zhang X, Di H, et al.Numerical simulation of the fluid flow,heat transfer,and solidification of twin-roll strip casting[J].Journal of Materials Processing Technology, 2006, 174(1-3):7-13
|
[8] |
仇圣桃, 刘和平, 干勇.基于连续模型的板坯连铸凝固过程的数值模拟[J].钢铁研究学报, 2003, 15(6):16-20
|
[8] |
仇圣桃, 刘和平, 干勇.基于连续模型的板坯连铸凝固过程的数值模拟[J].钢铁研究学报, 2003, 15(6):16-20
|
[9] |
文光华, 祝明妹, 何俊范等.双辊薄带连铸熔池液面波动物理模拟[J].金属学报, 2000, 36(9):1001-1004
|
[9] |
文光华, 祝明妹, 何俊范等.双辊薄带连铸熔池液面波动物理模拟[J].金属学报, 2000, 36(9):1001-1004
|
[10] |
Guang-hua W, Ming-mei Z, Pei-dao D, et al.Study on Level Fluctuation of Twin Roll Strip Caster by Water Modeling[J].Journal of iron and steel research, international, 2002, 9(2):10-14
|
[10] |
Guang-hua W, Ming-mei Z, Pei-dao D, et al.Study on Level Fluctuation of Twin Roll Strip Caster by Water Modeling[J].Journal of iron and steel research, international, 2002, 9(2):10-14
|
[11] |
陈向阳, 曹磊, 胡建东等.精炼炉混合特性及夹杂物去除的水模型研究[J].钢铁, 2009, 44(12):27-31
|
[11] |
陈向阳, 曹磊, 胡建东等.精炼炉混合特性及夹杂物去除的水模型研究[J].钢铁, 2009, 44(12):27-31
|
[12] |
胡汉涛, 魏季和, 黄会发等.吹气管内径对精炼过程钢液流动和混合特性的影响[J].特殊钢, 2004, 25(5):9-11
|
[12] |
胡汉涛, 魏季和, 黄会发等.吹气管内径对精炼过程钢液流动和混合特性的影响[J].特殊钢, 2004, 25(5):9-11
|
[13] |
YChen, G.J. LI, S.B. Yang, M.Y. Zhu.Dynamic Soft Reduction for Continuously Cast Rail Bloom[J].Journal of iron and steel research, international, 2007, 14(5):13-17
|
[13] |
YChen, G.J. LI, S.B. Yang, M.Y. Zhu.Dynamic Soft Reduction for Continuously Cast Rail Bloom[J].Journal of iron and steel research, international, 2007, 14(5):13-17
|
[14] |
Rouchard D, Hamel F G, Turcotte S F, et al.Water Modeling Evaluation of Metal Delivery in a Twin Roll Strip Caster Using Pool Level and Residence Time Distribution Measurement[J].ISIJ Intermational, 2001, 41(12):1465-1472
|
[14] |
Rouchard D, Hamel F G, Turcotte S F, et al.Water Modeling Evaluation of Metal Delivery in a Twin Roll Strip Caster Using Pool Level and Residence Time Distribution Measurement[J].ISIJ Intermational, 2001, 41(12):1465-1472
|
[15] |
黄福祥, 张炯明, 王新华等.双辊薄带连铸不锈钢铸带表面横裂纹成因研究[J].钢铁, 2008, 43(2):47-50
|
[15] |
黄福祥, 张炯明, 王新华等.双辊薄带连铸不锈钢铸带表面横裂纹成因研究[J].钢铁, 2008, 43(2):47-50
|
[16] |
Kim W, Kim D, Kuznetsov A V.Simulation of coupled turbulent flow and heat transfer in the wedge-shaped pool of a twin-roll strip casting process[J].International Journal of Heat and Mass Transfer, 2000, 43(20):3811-3822
|
[16] |
Kim W, Kim D, Kuznetsov A V.Simulation of coupled turbulent flow and heat transfer in the wedge-shaped pool of a twin-roll strip casting process[J].International Journal of Heat and Mass Transfer, 2000, 43(20):3811-3822
|
[17] |
谭湘夫, 毛大恒, 蔡安辉等.镁合金板带双辊连续铸轧试验研究[J].机械工程学报, 2012, 48(16):30-35
|
[17] |
谭湘夫, 毛大恒, 蔡安辉等.镁合金板带双辊连续铸轧试验研究[J].机械工程学报, 2012, 48(16):30-35
|
[1] |
JI Xiu-mei1,2,WANG Long1,GAO Ke-wei2,LIU Jie1. Application of ELM to predict plate rolling force[J]. JOURNAL OF IRON AND STEEL RESEARCH , 2020, 32(5): 393-399. |
[2] |
CAO Yun-fei, YU Wei, LIU Min, JIANG Rui, WANG Chun. Austenite grain growth model of 38MnSiVS bearing microalloyed forging steel[J]. Iron and Steel, 2020, 55(5): 103-108. |
[3] |
ZOU Tao1,ZHAN Dong-ping1,ZHANG Hui-shu2,LI Da-liang3,HAN Jian-lin3,LIU Xi-feng3. Mathematical and physical experimental study on mould nozzle optimization in slab continuous casting[J]. JOURNAL OF IRON AND STEEL RESEARCH , 2020, 32(4): 304-310. |
[4] |
. Analysis and control of slag inclusion defect of low carbon steel slab[J]. , 2020, 45(2): 0-0. |
[5] |
. Flow field simulation and control structure optimization of two-strand T-ship tundish[J]. , 2020, 45(2): 0-0. |
[6] |
GU Jia-xin1,LIAN Fa-bo1,YANG Jian1,GAO Ming-xin2,SONG Hua1,FU Li-hua1. Flow and temperature fields of molten pool during flow distribution process in twin-roll casting[J]. JOURNAL OF IRON AND STEEL RESEARCH , 2020, 32(1): 44-51. |
|
|
|
|