|
|
Strip shape change and its tension compensation technology in process of speed increase and decrease of cold continuous rolling mill |
SHEN Li-tao1, XU Peng1, ZHANG Ya-zhen1, GU Qing1,3, KONG Peng-hui1, BAI Zhen-hua1,2 |
1. National Engineering Research Center for Equipment and Technology of Cold Strip Rolling, Yanshan University, Qinhuangdao 066004, Hebei, China; 2. State Key Laboratory of Metastable Materials Science and Technology, Yanshan University, Qinhuangdao 066004, Hebei, China; 3. School of Electrical Engineering, Yanshan University, Qinhuangdao 066004, Hebei, China |
|
|
Abstract Aiming at the problems of unstable rolling and poor shape quality caused by the fluctuation of rolling pressure in the speed increase and decrease stage of the tandem cold rolling process. In order to reduce the rolling force fluctuation and obtain high-quality strip shape,based on the equipment and process characteristics of cold continuous rolling mill,the influence of rolling speed fluctuation on the rolling pressure change under sufficient and insufficient emulsion flow was fully considered,and the shape evolution mechanism in the process of increasing and decreasing the speed of cold continuous rolling was analyzed. On this basis,a set of corresponding tension compensation models was developed and applied to the production of an 1 800 five-stand tandem cold rolling mill with the minimum overall rolling pressure fluctuation during the speed increase and decrease process of the tandem cold rolling mill as the objective function. In practice,good results have been achieved,and the rolling stability and the strip shape quality have been effectively improved,which has the value of further popularization and application.
|
Received: 29 July 2020
|
|
|
|
[1] 白振华,宋和川,侯彬,等. 冷轧机组升降速过程轧制压力变化模型及其影响因素研究[J]. 塑性工程学报,2017,24(3):135.(BAI Zhen-hua,SONG He-chuan,HOU Bin,et al. Research on the rolling pressure change model and its influencing factors of the cold rolling mill during speed increase and decrease[J]. Journal of Plasticity Engineering,2017,24(3):135.) [2] 白振华,王松尧,崔亚亚,等. 乳化液流量与速度关系曲线优化设定技术[J]. 钢铁,2017,52(7):58.(BAI Zhen-hua,WANG Song-yao,CUI Ya-ya,et al. Technology for optimizing the setting curve of the relationship between emulsion flow rate and velocity[J]. Iron and Steel,2017,52(7):58.) [3] 齐海峰,王艳超,时海涛,等. 冷连轧薄规格高强钢稳定轧制工艺浅析[J]. 轧钢,2018,35(4):84.(QI Hai-feng,WANG Yan-chao,SHI Hai-tao,et al. Analysis on the stable rolling process of cold rolled thin gauge high strength steel[J]. Steel Rolling,2018,35(4):84.) [4] 吴俊. 冷轧机张力控制系统分析[J]. 科技与创新,2015(2):9.(WU Jun. Analysis of cold rolling mill tension control system[J]. Science and Technology,2015(2):9.) [5] 卜赫男,闫注文,张殿华,等. 冷连轧过程控制中轧制力和前滑模型的综合自适应[J]. 沈阳工业大学学报,2015,37(3):299.(BU He-nan,YAN Zhu-wen,ZHANG Dian-hua,et al. Comprehensive adaptation of rolling force and forward slip model in the process control of cold continuous rolling[J]. Journal of Shenyang University of Technology,2015,37(3):299.) [6] 周庆田. 轧制压力设定值的变化对板形影响的研究[J]. 重型机械,2004(1):14.(ZHOU Qing-tian. Study on the influence of rolling pressure setting on plate shape[J]. Heavy Machinery,2004(1):14.) [7] 程其华,周庆田,徐俊,等. 冷带轧机轧制压力设定技术的研究[J]. 冶金设备,2006(1):19.(CHENG Qi-hua,ZHOU Qing-tian,XU Jun,et al. Research on rolling pressure setting technology of cold strip mill[J]. Metallurgical Equipment,2006(1):19.) [8] 刘志亮,李文强,王英杰. 动态板形辊平整机板形控制机理模型研究[J]. 中国机械工程,2011,22(13):1624. (LIU Zhi-liang,LI Wen-qiang,WANG Ying-jie.A study on the shape control mechanism model of the dynamic shape roller leveler[J]. China Mechanical Engineering,2011,22(13):1624.) [9] 唐伟,杜凤山,林海海,等. 冷轧高强集装箱板轧制稳定性控制技术[J]. 钢铁,2020,55(1):65.(TANG Wei,DU Feng-shan,LIN Hai-hai,et al. Rolling stability control technology of cold-rolled high-strength container plate[J]. Iron and Steel,2020,55(1):65.) [10] Mohieddine Jelali.Performance assessment of control systems in rolling mills-application to strip thickness and flatness control[J]. Journal of Process Control,2007,17(10):805. [11] 昝现亮,王凤琴,刘子英,等. 热轧带钢残余应力相关板形缺陷机理分析及攻关措施[J]. 中国冶金,2020,30(5):35.(ZAN Xian-liang,WANG Feng-qin,LIU Zi-ying,et al. Mechanism analysis and research measures of residual stress-related plate shape defects in hot rolled strip[J]. China Metallurgy,2020,30(5):35.) [12] 贾志伟,李元华,张海利,等. 以控制打滑为目标的取向硅钢可逆轧制工艺优化[J]. 轧钢,2020,37(1):42.(JIA Zhi-wei,LI Yuan-hua,ZHANG Hai-li,et al. Optimization of reversible rolling process of oriented silicon steel aiming at control of slip[J]. Steel Rolling,2020,37(1):42.) [13] Babak Moazeni,Mahmoud Salimi.Investigations on relations between shape defects and thickness profile variations in thin flat rolling[J]. The International Journal of Advanced Manufacturing Technology,2015,77(5-8):1315. [14] WANG Lu-bing,YAN Lin-jing,HE An-rui,et al.Research and optimization for transverse thickness difference control strategy of UCMW cold tandem mill[J]. Advanced Materials Research,2013,2300:1520. |
[1] |
ZHANG Shuai, YU Hua-xin, ZHANG Tong-yuan, GAO Xin-cheng, LIU Hong-min. Experiment on laser cladding surface strengthening of flatness roll for cold-rolled steel strip[J]. Iron and Steel, 2021, 56(7): 94-100. |
[2] |
SUN Jie, SHAN Peng-fei, PENG Wen, ZHANG Dian-hua. Cold-rolled flatness actuator efficiency coefficient obtaining based on data noise reduction[J]. Iron and Steel, 2021, 56(6): 67-74. |
[3] |
Jie Sun, Peng-fei Shan, Zhen Wei, Yao-hui Hu, Qing-long Wang, Wen Peng, Dian-hua Zhang. Data-based flatness prediction and optimization in tandem cold rolling[J]. JOURNAL OF IRON AND STEEL RESEARCH,INTERNATIONAL, 2021, 28(5): 563-573. |
[4] |
Zhi-ying Gao, Bo Tian, Yang Liu, Li-yuan Zhang, Mao-lin Liao. Dynamics-based optimization of rolling schedule aiming at dual goals of chatter suppression and speed increase for a 5-stand cold tandem rolling mill[J]. JOURNAL OF IRON AND STEEL RESEARCH,INTERNATIONAL, 2021, 28(2): 168-180. |
[5] |
WANG Si-hai, ZHAI De-jia, LIU Li-hui, HE Hai-nan, LI Lei, XU Dong. Wear control strategy of work roll in 1 250 mm hot continuous rolling[J]. Iron and Steel, 2020, 55(9): 57-63. |
[6] |
WANG Dong-cheng, ZHANG Ya-lin, XU Yang-huan. Research on problem of "pseudo-bad flatness" at tail of hot rolling strip[J]. Iron and Steel, 2020, 55(9): 64-68. |
|
|
|
|