|
|
Development trend and prospect of low-carbon green ironmaking technology |
LIU Ran, ZHANG Zhi-feng, LIU Xiao-jie, LI Xin, LI Hong-yang, LÜ Qing |
College of Metallurgy and Energy, North China University of Science and Technology, Tangshan 063210, Hebei, China |
|
|
Abstract At present, in order to actively respond to a series of issues such as climate change, countries around the world have put forward green emission reduction plans. At the same time, China puts forward the corresponding "carbon peak, carbon neutral" energy conservation and emission reduction goals, and takes "1+N" and other policy systems as the core support to achieve sustainable development strategy, actively respond to climate change, fulfill the obligations of a big country. Steel industry, as the industry with the largest carbon emissions among 31 manufacturing sectors, naturally becomes the "vanguard" in the battle of energy conservation and emission reduction. At present, the complex blast furnace production process is still mainly taking coal, coke and other fossil resources as the main fuel, which makes it become a large carbon consumer, carbon emitter and pollution emitter in the iron and steel process, so the green and low-carbon transformation and upgrading of blast furnace ironmaking process is imminent. This paper discusses from three parts, that is background introduction, development trend of low-carbon green iron making technology and future development prospect. In particular, the development of green and low-carbon iron-making technology is elaborated in detail. Firstly, from two aspects of optimizing energy-saving and low-carbon operation and constructing circular economic environmental protection circle, it discusses how to realize low-carbon and green iron-making of blast furnace process from the perspectives of fine charge operation and improving production technology. Secondly, from the field of non-blast furnace, the development status of direct reduction process and melting reduction process at home and abroad is described, and the corresponding comparison and classification are summarized. Finally, the development trend for this kind of technology is discussed from the angle of innovative ironmaking process (hydrogen metallurgy, intelligent ironmaking). In the end, five aspects are prospected based on the latest developments of current green and low-carbon iron making technology, and the task direction of "green and low-carbon as the direction, energy saving and emission reduction as the target" is clearly defined.
|
Received: 30 November 2021
|
|
|
|
[1] 董思言,高学杰. 长期气候变化——IPCC第五次评估报告解读[J]. 气候变化研究进展,2014,10(1):56.(DONG Si-yan, GAO Xue-jie. Long-term climate change—Interpretation of IPCC fifth assessment report[J]. Advances in Climate Change Research,2014,10(1):56.)
[2] 中共中央,国务院. 关于完整准确全面贯彻新发展理念做好碳达峰碳中和工作的意见[A/OL]. (2021-9-22)[2021-11-10]. http://www.gov.cn/zhengce/2021-10/24/content_5644613.htm.(CPC Central Committee, State Council. About the complete and accurate to fully implement the new concept of development to do a good job of carbon of peak carbon neutral opinion[A/OL]. (2021-9-22) [2021-11-10]. http://www.gov.cn/zhengce/2021-10/24/content_5644613.htm.)
[3] 张继文,牛禄青. 百年首钢绿色低碳发展的实践探索与启示[J]. 新经济导刊,2021(2):41.(ZHANG Ji-wen, NIU Lu-qing. The practical exploration and enlightenment of Shougang Group's green and low-carbon development in the century[J]. New Economic Guide,2021(2):41.)
[4] 张福明. 首钢绿色低碳炼铁技术的发展与展望[J]. 钢铁,2020,55(8):11.(ZHANG Fu-ming. Development and prospect of green and low-carbon iron-making technology in Shougang Group[J]. Iron and Steel,2020,55(8):11.)
[5] 王新东,金永龙. 高炉使用高比例球团的战略思考与球团生产的试验研究[J]. 钢铁,2021,56(5):7.(WANG Xin-dong, JIN Yong-long. Strategic thinking of using high proportion pellets in blast furnace and experimental study on pellet production[J]. Iron and Steel,2021, 56(5):7.)
[6] 胡俊鸽,周文涛,郭艳玲,等. 日本含碳球团技术研究进展[J]. 烧结球团,2014,39(2):27.(HU Jun-ge,ZHOU Wen-tao,GUO Yan-ling,et al. Research progress of carbon pellet technology in Japan[J]. Sinter Pellets, 2014, 39(2):27.)
[7] CHEN G, FANG Q, PENG X P, et al. Discussion on high blast temperature technology of hot blast stove[J]. China Nonferr Metall,2012,41(6):64.
[8] 张福明,银光宇,李欣. 现代高炉高风温关键技术问题的认识与研究[J]. 中国冶金,2020,30(12):1.(ZHANG Fu-ming, YIN Guang-yu, LI Xin. Research on key technical problems of high blast temperature in modern blast furnace[J]. China Metallurgy,2020,30(12):1.)
[9] 王瀚,王静松,彭星. 高炉富氧喷吹还原性气体工艺分析[J].中国冶金,2021,31(5):19.(WANG Han,WANG Jing-song,PENG Xing. Process analysis of oxygen enriched blast furnace spraying reducing gas[J]. China Metallurgy, 2021, 31(5): 19.)
[10] LIU Yi-ran,SHEN Yan-song. Modelling and optimisation of biomass injection in ironmaking blast furnaces[J]. Progress in Energy and Combustion Science,2021, 87: 100952.
[11] 董文明,杨光涛,李博,等. 高炉降低燃料比技术研究[Z]. 天津钢铁集团有限公司.天钢鉴字[2020]012号. 2021-12-04.(DONG Wen-ming, YANG Guang-tao, LI Bo, et al. Research on fuel ratio reduction technology of blast furnace[Z]. Tianjin Iron and Steel Group Co.,Ltd.. Tiangang Jianzi [2020]012. 2021-12-04.)
[12] Hannu Suopajärvia, Kentaro Umekib, Elsayed Mousa, et al. Use of biomass in integrated steelmaking-Status quo, future needs and comparison to other low-CO2 steel production technologies[J]. Applied Energy, 2018, 213: 384.
[13] Martin Hammerschmid, Stefan Müller, Josef Fuchs, et al. Evaluation of biomass-based production of below zero emission reducing gas for the iron and steel industry[J]. Biomass Conversion and Biorefinery,2021,11(1):169.
[14] Hesham Ahmed. New trends in the application of carbon-bearing materials in blast furnace ironmaking[J]. Minerals,2018,8(12):561.
[15] Jon Solar, Frederik Hippe, Alexander Babich, et al. Conversion of injected forestry waste biomass charcoal in a blast furnace: influence of pyrolysis temperature[J]. Energy and Fuels,2021,35(1):529.
[16] Ariyama T, Matsuura M, Noda H, et al. Development of shaft-type scrap melting process characterized by massive coal and plastics injection[J]. ISIJ International, 1997, 37(10): 977.
[17] Janz J, Weiss W. Injection of waste plastics into the blast furnace of Stahlwerke Bremen[J]. Revue De Metallurgie-Cahiers Dinformations Techniques,1996,93(10):1219.
[18] Joachim Buchwalder,Klaus Scheidig,Manfred Schingnitz. Results and trends on the injection of plastics and ASR into the blast furnace[J]. ISIJ International,2006,46(12):1767.
[19] Babich A,Senk D,Knepper M,et al. Conversion of injected waste plastics in blast furnace[J]. Ironmaking and Steelmaking,2016,43(1):11.
[20] 王瑞军. 高炉喷吹焦炉煤气进展[J]. 包钢科技,2019,45(1):32.(WANG Rui-jun. Progress of coke oven gas for injection of blast furnace[J]. Science and Technology of Baotou Steel, 2019, 45(1):32.)
[21] 刘学燕,毛雪芹,薄涛,等. 济钢4号高炉喷吹焦炉煤气工业试验[J]. 炼铁,2019,38(2):39.(LIU Xue-yan,MAO Xue-qin,BO Tao,et al. Experimental study on injection of coke oven gas in No.4 BF of Jinan Iron and Steel[J]. Ironmaking, 2019, 38(2):39.)
[22] 姜喆,车玉满,郭天永. 鞍钢2号高炉高利用系数生产实践[J]. 上海金属,2017,39(4):90.(JIANG Zhe,CHE Yu-man,GUO Tian-yong. Production practice of high utilization coefficient of No.2 blast furnace at Anshan Iron and Steel Co., Ltd.[J]. Shanghai Metals,2017,39(4):90.)
[23] 王玉莲. 济钢1#1 750 m3高炉提高利用系数生产实践[J]. 山东冶金,2018,40(2): 18.(WANG Yu-lian. Practice of improving utilization coefficient of 1#1 750 m3 blast furnace in Jinan Iron and Steel Co., Ltd.[J]. Shandong Metallurgy, 2018, 40(2): 18.)
[24] 孙连生,庞师艳. 莱钢1 080 m3高炉提高炉顶压力操作实践[C]//智能技术在炼铁上的应用研讨会. 嘉兴:河北省金属学会,2019: 142.(SUN Lian-sheng,PANG Shi-yan. Operation practice of improving top pressure of 1 080 m3 blast furnace[C]//Proceedings of the Symposium on Intelligent Technology Application in Ironmaking. Jiaxing:Hebei Province Society for Metals,2019:142.)
[25] WANG Ya-jie,ZUO Hai-bin,Jun Zhao. Recent progress and development of ironmaking in China as of 2019:An overview[J]. Ironmaking and Steelmaking,2020, 47(6): 640.
[26] 王振,张涛颖,曹旭. 韶钢六高炉加废钢生产实践[J]. 甘肃冶金, 2019,41(3):106.(WANG Zhen,ZHANG Tao-ying,CAO Xu. Production practice of No.6 BF with scrap steel at Shaogang[J]. Gansu Metallurgy, 2019, 41(3):106.)
[27] 张德合,孙延斌,张振姣. 安钢节铁增钢生产模式实践[J]. 冶金经济与管理,2021(3):23.(ZHANG De-he,SUN Yan-bin,ZHANG Zhen-jiao. Practice on production mode of saving iron and increasing steel in Angang[J]. Metallurgical Economics and Management,2021(3):23.)
[28] 李宏玉,莫朝兴,唐志宏,等. 柳钢5#高炉加废钢降成本分析与实践[J]. 工业炉,2018,40(2):39.(LI Hong-yu,MO Chao-xing,TANG Zhi-hong, et al. Analysis and practice on reducing cost of adding scrap steel to No.5 blast furnace of LiuSteel[J]. Industrial Furnace,2018,40(2):39.)
[29] 杨猛,任春颖. 钢铁企业煤气系统利用节能分析[J]. 冶金能源, 2020, 39(4):49.(YANG Meng,REN Chun-ying. Energy saving analysis of coal gas resource utilization in iron and steel enterprises[J]. Energy for Metallurgical Industry, 2020, 39(4): 49.)
[30] 刘振均,李海波. 高炉提高TRT发电实绩[J]. 钢铁, 2005, 40(8): 11.(LIU Zhen-jun,LI Hai-bo. Blast furnace improves TRT power generation performance[J]. Iron and Steel,2005,40(8):11.)
[31] 郭玉华. 高炉煤气净化提质利用技术现状及未来发展趋势[J]. 钢铁研究学报,2020,32(7):525.(GUO Yu-hua. Current status and future development trend of purification and improvement technology of blast furnace gas[J]. Journal of Iron and Steel Research,2020,32(7):525.)
[32] 李创国,雷仲存,李劲松,等. 首钢迁钢公司高炉冲渣水余热利用[J]. 冶金能源,2020,39(1):50.(LI Chuang-guo,LEI Zhong-cun,LI Jin-song,et al. Utilization of waste heat of washing blast furnace slag water in Qianan steel of Shougang Group[J]. Energy for Metallurgical Industry,2020,39(1):50.)
[33] 栾国伟,李敬宇,雷琪安,等.热风炉废烟气余热高效利用研究[J]. 冶金能源,2020,39(4):33.(LUAN Guo-wei,LI Jing-yu,LEI Qi-an,et al. Study on high-efficiency utilization of waste flue gas heat in hot blast stove[J]. Energy for Metallurgical Industry,2020,39(4):33.)
[34] 王涛,谢春帅. 烧结烟气循环技术研究进展与展望[J]. 冶金能源,2020,39(2):55.(WANG Tao,XIE Chun-shuai. Research progress and prospect of sintering flue gas recycling technology[J]. Energy for Metallurgical Industry,2020,39(2):55.)
[35] ZHAO Jun,ZUO Hai-bin,WANG Ya-jie. Review of green and low-carbon ironmaking technology[J]. Ironmaking and Steelmaking, 2020, 47(3): 296.
[36] Jeong S J. System dynamics approach for the impacts of FINEX technology and carbon taxes on steel demand: Case study of the POSCO[J]. International Journal of Precision Engineering and Manufacturing—Green Technology, 2015, 2(1):85.
[37] Won S,Choi S G. Development of the Korean iron and steel industry[J]. IFAC Proc Volumes, 2003:36(24):1.
[38] Cho M,Hg K,Hg L. Energy and pollutants reducing technologies in new ironmaking processes at POSCO[J]. ISIJ International, 2002,42:33.
[39] 王维兴. 高炉炼铁与非高炉炼铁技术比较[C]// 2019年全国炼铁设备及设计年会. 珠海:中国金属学会,2019:14.(WANG Wei-xing. Comparison of iron smelting technology between blast furnace and non-blast furnace[C]// 2019 National Ironmaking Equipment and Design Annual Conference Proceedings. Zhuhai:The Chinese Society for Metals,2019:14.)
[40] 张奔,赵志龙,郭豪,等. 气基竖炉直接还原炼铁技术的发展[J]. 钢铁研究,2016,44(5):59.(ZHANG Ben, ZHAO Zhi-long, GUO Hao, et al. Development of direct reduction iron smelting technology in gas-base shaft furnace[J]. Iron and Steel Research,2016,44(5):59.)
[41] Klawonn R M,Siuka D. Current status and future of the Midrex direct reduction technology[J]. Stahl und Eisen, 2006, 126(3):23.
[42] Johannes Leopold Schenk. Recent status of fluidized bed technologies for producing iron input materials for steelmaking[J]. Particuology,2011,9(1):11.
[43] Kaisa Huitu, Hannu Helle, Mikko Helle. Optimization of steelmaking using Fastmet direct reduced iron in the blast furnace[J]. ISIJ International,2013,53(12):2038.
[44] 刘衍辉,吕学伟,白晨光. 新一代炼铁技术——ITmk3工艺[C]//2014年全国炼铁生产技术会暨炼铁学术年会文集(下). 郑州:中国金属学会,2014: 376.(LIU Yan-hui, LÜ Xue-wei, BAI Chen-guang. A new generation of iron making technology—ITmk3 process[C]// 2014 National Iron Production Technology Conference and Iron Making Academic Annual Conference Collection (II). Zhengzhou:The Chinese Society for Metals,2014: 376)
[45] 赵沛,郭培民. 煤基低温冶金技术的研究[J]. 钢铁,2004,39(9):1.(ZHAO Pei, GUO Pei-min. Research on coal based cryogenic metallurgy technology[J]. Iron and Steel,2004,39(9):1.)
[46] 王敏,任荣霞,董洪旺. 熔融还原炼铁最新技术及工艺路线选择探讨[J]. 钢铁,2020,55(8):145.(WANG Min, REN Rong-xia, DONG Hong-wang. Discussion on the latest technology and process route selection of molten reduction ironmaking[J]. Iron and Steel,2020,55(8):145.)
[47] 重大创新突破! 建龙赛思普氢基熔融还原项目成功出铁[E/OL]. 中国钢铁新闻网,2021-04-13. http://www.csteelnews.com/xwzx/hydt/202104/t20210413_49101.html.(Major innovation breakthrough! JianLong CISP hydrogen fusion reduction project successfully produced iron[E/OL]. CSTEEL News,2021-04-13. http://www.csteelnews.com/xwzx/hydt/202104/t20210413_49101.html.)
[48] 陆亚男,吴胜利,王来信,等. 炉渣成分对COREX铁水脱硫效果的影响[J]. 钢铁,2019,54(9):33.(LU Ya-nan,WU Sheng-li,WANG Lai-xin, et al. Effect of slag composition on desulfurization effect of COREX hot metal[J]. Iron and Steel,2019,54(9):33.)
[49] 李颖,李正一,狄瞻霞,等. 还原条件对COREX球团显气孔率和金属率的影响[J]. 钢铁, 2018, 53(2):10.(LI Ying, LI Zheng-yi, DI Zhan-xia, et al. Effect of reduction conditions on porosity and metal percentage of COREX pellets[J]. Iron and Steel,2018,53(2):10.)
[50] 邹庆峰,陈若平. 八钢欧冶炉生产工艺控制的优化[J]. 炼铁,2017,36(2):60.(ZOU Qing-feng,CHEN Ruo-ping. Optimization of production process control of Eight Steel European smelting furnace[J]. Ironmaking,2017,36(2):60.)
[51] 蔡建新,季书民. 浅析八钢欧冶炉低工序能耗[J]. 新疆钢铁,2020(4):5.(CAI Jian-xin,JI Shu-min. Optimization of production process control of Bagang European smelting furnace[J]. Xinjiang Iron and Steel, 2020(4):5.)
[52] Yi Sang-Ho,Choi Moo-Eob,Kim Do-Hyung, et al. FINEX (R) as an environmentally sustainable ironmaking process[J]. Ironmaking and Steelmaking,2019,46(7):625.
[53] 张建良,张冠琪,刘征建,等. 山东墨龙HIsmelt工艺生产运行概况及主要特点[J]. 中国冶金,2018,28(5):37.(ZHANG Jian-liang,ZHANG Guan-qi,LIU Zheng-jian,et al. Production overview and main characteristics of HIsmelt process in Shandong Molong[J]. China Metallurgy,2018,28(5):37.)
[54] TANG Jue,CHU Man-sheng,LI Feng, et al. Development and progress on hydrogen metallurgy[J]. International Journal of Minerals Metallurgy and Materials,2020,27(6):713.
[55] 氢冶金发展现状及面临的挑战[N/OL]. 世界金属导报,2021-09-14B01. http://www.worldmetals.com.cn/viscms/bianjituijianxinwen1277/20210914/256213.html.(Development status and challenges of hydrogen metallurgy[N]. World Metal Guide,2021-09-14B01.http://www.worldmetals.com.cn/viscms/bianjituijianxinwen1277/20210914/256213.html.)
[56] CMISI低碳研究团队.中国氢能冶金研究及最近发展[N/OL]. 冶金工业信息标准研究院. http://www.cmisi.com.cn/default/index/newsDetails?newsId=994.(CMISI Low-carbon Research team. The hydrogen metallurgy research and recent development in China[N/OL]. Metallurgical industry information standards institute. http://www.cmisi.com.cn/default/index/newsDetails?newsId=994.)
[57] 严伟明. 高炉实现智能管理 宝钢炼铁技术实现新飞跃[N].中国工业报,2011-04-28(A3).(YAN Wei-ming. Intelligent management of blast furnace and new leaps in ironmaking technology of Baosteel[N]. China Industry News,2011-04-28(A3).)
[58] 宋玉铮. 马钢炼铁总厂2号高炉一系统智能化改造完成[N].中国冶金报,2019-12-19(3).(SONG Yu-zheng. Intelligent transformation of No. 2 blast furnace system in masteel ironmaking general plant[N]. China Metallurgical News,2019-12-19(3).)
[59] 高建民,白兴全,赵宏博,等. 炼铁大数据智能互联平台研究及应用[Z]. 酒泉钢铁(集团)有限责任公司,项目年度编号:2000190192.(GAO Jian-min,BAI Xing-quan,ZHAO Hong-bo,et al. Research and application of big data intelligent interconnection platform for ironmaking[Z]. Jiuquan Iron and Steel (Group) Co. Ltd.,The year number of project:2000190192.)
[60] 郭雨春,钱宏智. 首钢智能化建设与发展[J]. 自动化博览,2018,35(8):50.(GUO Yu-chun, QIAN Hong-zhi. Intelligent construction and development of Shougang[J]. Automatio Expo, 2018, 35(8): 50.)
[61] 陶海银,王春丽. 中冶赛迪:以“AI+5G”助力包钢股份智能化升级[N]. 中国冶金报,2021-8-24(5).(TAO Hai-yin,WANG Chun-li. MCC SAIdi: "AI+5G" to help baogang intelligent upgrade[N]. China Metallurgical News,2021-8-24(5).)
[62] 赵华涛,卢瑜,翟明,等. 一种炼铁系统大数据平台:中国,CN109815282A[P]. 江苏省沙钢钢铁研究院有限公司,2019-05-28.(ZHAO Hua-tao, LU Yu,ZHAI Ming,et al. A big data platform for iron making system:China,CN109815282A[P].Institule of Research of Iron and Steel,Shagang,Jiangsu Province, 2019-05-28.)
[63] 赵宏博,刘伟,李永杰,等. 基于炼铁大数据智能互联平台推动传统工业转型升级[J]. 大数据,2017(6):15.(ZHAO Hong-bo,LIU Wei,LI Yong-jie,et al. Promoting the transformation and upgrading of traditional industry based on the intelligent interconnection platform of big data in ironmaking[J]. Big Data,2017(6):15.) |
[1] |
WANG Xin-dong, HUANG Yong-jian, PENG Shao-feng, YU Yang-yang, LI Shuang-jiang. A new generation of electric furnace short-flow special steel plant HBIS Group Shisteel New Region designed with concept of "green, intelligent and efficient"[J]. Iron and Steel, 2022, 57(9): 1-10. |
[2] |
YAO Tonglu,WU Wei,YANG Yong,HE Qing,MENG Huadong,LIN Tengchang. Analysis on lowcarbon development of China′s steel industry under “dualcarbon” goal[J]. JOURNAL OF IRON AND STEEL RESEARCH , 2022, 34(6): 505-513. |
[3] |
CHAI Xi-cui, YUE Qiang, ZHANG Yu-jie, WANG Qi. Numerical simulation analysis of reduction domain in hydrogen metallurgy shaft furnace[J]. Iron and Steel, 2022, 57(4): 138-147. |
[4] |
WU Yu-han, CHEN Wen, YANG Xin, HE Zhi-jun. Erosion behavior of low carbon mold flux on submerged nozzle refractory[J]. Iron and Steel, 2022, 57(10): 120-126. |
[5] |
XIAO Peng. Innovation practice and future prospects of blast furnace ironmaking technology[J]. Iron and Steel, 2021, 56(6): 10-14. |
[6] |
WU Yao-guang, XIAO Bu-qing, ZHU Li-guang, WANG Yan. Current situation analysis and prospect of iron and steel raw material for electric arc furnace steelmaking[J]. Iron and Steel, 2021, 56(11): 55-62. |
|
|
|
|