|
|
Microstructure Characteristic and Mechanical Properties of X100 Pipeline Steel in Different Cooling Schedules |
ZHOU Min |
|
|
|
Abstract A lab designed pipeline steel was used to study the continuous cooling transformation (CCT) and the microstructure characteristic and mechanical properties in different cooling schedules. It was shown that with cooling rate increasing and finish cooling temperature decreasing, the microstructure evolved from acicular ferrite to lath bainite and martensite, martensite islands or M-A islands were micro-twining martensite in non-quenched steel, the comprehensive mechanical properties was the optimum in the steel that cooled to about 450℃ at the rate of about 30℃/s without relaxation. When relaxation and super-fast cooling process is used, it is essential to well control the relaxation time and finish cooling temperature of super-fast cooling process and combine with the following cooling process for obtaining the perfect microstructure and strength and toughness.
|
Received: 15 March 2010
|
|
|
|
[1] |
WEI Tong-yu, ZOU De-ning, ZHANG Ying-bo, CHEN Wan-wan. Effect of aluminum on microstructure and properties of high alumina ferritic heat resistant steel[J]. Iron and Steel, 2020, 55(6): 80-83. |
[2] |
ZHAO Yun-peng, YU Chao, XIAO Hong, WU Zong-he, XU Peng-peng, XIE Hong-biao. Effect of pure iron interlayer on mechanical properties of hot rolled stainless steel clad plate[J]. Iron and Steel, 2020, 55(5): 73-79. |
[3] |
SHAO Cheng-wei, WANG Jun-tao, ZHAO Xiao-li, HUI Wei-jun. Microstructure and mechanical properties of intercritically annealed Al-contain medium Mn steel[J]. Iron and Steel, 2020, 55(5): 87-93. |
[4] |
CAO Jing-hua1,PAN Hong-bo2,3,ZHANG Jing1,ZHANG Teng-fei2,LI Xu-dong2,LIU Wei-ming2,3. Continuous cooling transformation of NbTi microcarbon deep drawing dualphase steel[J]. JOURNAL OF IRON AND STEEL RESEARCH , 2020, 32(4): 322-328. |
[5] |
WANG Ji-hong, ZHANG Li-na, CHEN De-li, QI Yue, CAO Li-hong. Discussion about heat treatment process of X20Cr13 blade steel for gas turbine[J]. PHYSICS EXAMINATION AND TESTING, 2020, 38(3): 18-. |
[6] |
XING Xian-qiang, CAO Wen-quan, WANG Cun-yu. Bond structure of 55SiCr steel used for coil springs of automotive suspension system[J]. Iron and Steel, 2020, 55(3): 68-73. |
|
|
|
|