|
|
FEM Analysis of Thermal and Deformation Fields in Mould Copper |
LONG Xuesong,PENG Xianghe |
Department of Engineering Mechanics, Chongqing University, Chongqing 400044, China |
|
|
Abstract Using mould copper with two kinds of cooling water slot system as the research object, the steady temperature distribution and thermal deformation field in the mould at different casting speeds were analyzed by the commercial FE software ABAQUS. The calculated results show that the rational design of cooling water slots in mould copper can distinctly reduce the maximum temperature and improve temperature distribution and thermal deformation, which could, in turn, increases the mold life, the production rate and improve the quality of slabs,also provide a theoretical reference for the optimization of cooling water slot system in mould copper.
|
Received: 01 January 1900
|
|
|
|
[1] |
ZOU Tao1,ZHAN Dong-ping1,ZHANG Hui-shu2,LI Da-liang3,HAN Jian-lin3,LIU Xi-feng3. Mathematical and physical experimental study on mould nozzle optimization in slab continuous casting[J]. JOURNAL OF IRON AND STEEL RESEARCH , 2020, 32(4): 304-310. |
[2] |
. Formation reasons and control measures of abnormal oscillation marks for 10B21 cold-heading steel billets[J]. , 2020, 45(3): 0-0. |
[3] |
zheng yuanshou. High speed production technology of 160 × 160mm2 continuous casting in SanGangsteel[J]. , 2020, 45(3): 0-0. |
[4] |
chishirong chishirongchishirong. [J]. , 2020, 45(3): 0-0. |
[5] |
suai. Reason and Control of Surface depression defect in Slab of Low-carbon Low-silicon Aluminum Killed Steel[J]. , 2020, 45(2): 0-0. |
[6] |
. Analysis and control of slag inclusion defect of low carbon steel slab[J]. , 2020, 45(2): 0-0. |
|
|
|
|