|
|
|
| Study on Desulfurization and Denitrification of Adsorbent Modified by Microwave |
| |
|
|
|
|
Abstract The adsorbent was prepared in microwave process by using refinery cinder and fly ash as the raw materials. Simultaneous desulfurization and denitrification tests were carried out in setting mechanism, with the object of apparent activation enery of adsorbent before or after modified by microwave. The purification mechanism of adsorbents is being discussed. The results show that the activation energy of adsorbents after modified by microwave depressed markedly. Microwave modification could enhance the desulfurization and denitrification acivating of adsorbents.
|
|
Received: 28 May 2008
|
|
|
|
| [1] |
GAN Mu-yuan1,WEI Zhen-ning1,SHI Chu-gang1,LIU Hua1,ZHU Meng-fei2,CHUN Tie-jun2. Influences of fuel modified using burnt lime on NOx emission in burning and sintering process[J]. JOURNAL OF IRON AND STEEL RESEARCH , 2019, 31(9): 816-821. |
| [2] |
GAN Mu-yuan1,WEI Zhen-ning1,SHI Chu-gang1,LIU Hua1,ZHU Meng-fei2,CHUN Tie-jun2. Optimizing process of extracting nickel from laterite nickel based on response surface methodology[J]. JOURNAL OF IRON AND STEEL RESEARCH , 2019, 31(10): 897-903. |
| [3] |
ZHANG Kang-hui，ZHANG Yan-ling，WU Tuo. Kinetics of hot metal desulfurization using CaO-SiO2-Al2O3-Na2O-TiO2 slag[J]. Iron and Steel, 2018, 53(11): 22-28. |
| [4] |
LAO Yi- gui,,,GAO Yun- ming,,,WANG Qiang,,LI Guang- qiang,. Electrical conductivity measurement of 80%CaF2- 10%CaO- 10%SiO2 melt by CVCC method[J]. , 2018, 30(10): 789-795. |
| [5] |
LI Jun，ZHANG Ling-ling，ZHAO Gui-zhou，CANG Da-qiang. Pilot practice of direct modification of molten blast furnace slag and preparation of mineral wool fiber[J]. Iron and Steel, 2017, 52(9): 99-103. |
| [6] |
XU Ying，，ZHANG Zi-zi，，WANG Bian，，HU Chen-guang，，WANG Huan-huan，. Curing influence factors and mechanism of stainless steel slag in AOD[J]. Iron and Steel, 2017, 52(8): 43-47. |
|
|
|
|
2009, Vol. 1 